Baseus 10W Automatic Clamping Wireless Car Charger Mount User Manual

Introduction

Thank you for choosing the Baseus 10W Automatic Clamping Wireless Car Charger Mount. This device is designed to provide convenient and fast wireless charging for your Qi-enabled smartphone while securely holding it in your vehicle. Please read this manual carefully before use to ensure proper operation and to maximize the product's lifespan.

Consignes de sécurité

• Ne pas démonter ni modifier le produit.
• Tenir à l'écart de l'eau, du feu et des températures élevées.
• Évitez les chocs violents ou de faire tomber l'appareil.
• Assurez une bonne ventilation autour du chargeur pendant son utilisation.
• Use only with compatible power sources (QC 3.0 car charger recommended for fast charging).

Contenu du colis

• Baseus Wireless Car Charger Mount
• Air Vent Clip (1x)
• Micro USB Cable (4.9ft)
• Manuel d'utilisation

Produit terminéview

The Baseus Wireless Car Charger Mount features an automatic clamping mechanism, Qi wireless charging, and an air vent mounting system. It is designed for easy one-hand operation.

Composants clés :

• Station de charge : The surface where the phone rests for wireless charging.
• Cl automatiqueamping Arms: Securely hold the phone in place.
• Infrared Induction Sensor: Detects the phone for automatic clamping.
• One-Tap Release Button: Located on the side, releases the clamparmes.
• Clip de ventilation : Attaches the mount to your car's air vent.
• Port micro-USB : Pour entrée de puissance.

Instructions d'installation

1. Attaching the Air Vent Clip

1. Unscrew the nut on the back of the charger mount.
2. Insert the ball joint of the air vent clip into the nut, then into the socket on the back of the charger.
3. Tighten the nut to secure the clip to the charger.

2. Mounting to the Car Air Vent

1. Choose a suitable air vent in your vehicle. The clip is designed for various vent types, as shown in the image below.
2. Gently push the air vent clip onto one of the vent blades until it is securely attached.
3. Adjust the angle of the charger mount for optimal viewing.

This image illustrates the different types of car air vents that are compatible with the charger mount's clip. Ensure your car's vent matches one of the compatible designs for secure installation.

3. Connexion de l'alimentation

1. Connect the Micro USB cable to the charging port on the bottom of the charger mount.
2. Plug the other end of the USB cable into a car charger (not included). For 10W fast charging, a QC 3.0 car charger is required. Standard 5V/2A car chargers will provide 5W charging.
3. The indicator light on the charger will illuminate, indicating it is powered on and ready for use.

Mode d'emploi

1. Placing Your Phone

1. Hold your Qi-enabled smartphone near the charging pad. The infrared induction sensor will detect your phone.
2. Le cl automatiqueamping arms will open. Place your phone onto the charging pad.
3. Le CLamping arms will automatically close, securing your phone and initiating wireless charging.

This image illustrates how the infrared sensor detects a phone, causing the arms to automatically open and then clamp shut once the phone is placed, initiating charging.

2. Removing Your Phone

1. To release your phone, gently touch the sensor button located on the right side of the charger mount.
2. Le CLamping arms will automatically open, allowing you to remove your phone.

3. Fonctionnalité de recharge sans fil

The charger supports Qi-enabled phones between 4.0 and 6.5 inches. Charging speeds vary:

• Charge rapide 10W: For compatible Samsung phones (e.g., Galaxy S10/S9/Note 9). Requires a QC 3.0 car charger.
• Charge rapide 7.5W: For compatible iPhones (e.g., iPhone Xs/XR/X/8). Requires a QC 3.0 car charger.
• Charge standard 5W : For other Qi-enabled devices. Requires a 5V/2A car charger.

Remarque importante :

• The thickness of your phone case should not exceed 4mm for optimal charging.
• Metal cases or foreign objects between the phone and charger will interfere with wireless charging.

This image provides a visual guide to the wireless charging capabilities, showing 10W, 7.5W, and 5W charging for various phone models and the requirement for a QC 3.0 car charger for fast charging.

4. Vidéo de démonstration du produit

Watch this video for a visual demonstration of the Baseus Wireless Car Charger Mount's features and operation.

Entretien

• Nettoyez la surface du chargeur avec un chiffon doux et sec. N’utilisez pas de nettoyants abrasifs ni de solvants.
• Ensure the air vent clip is free from dust and debris to maintain a secure grip.
• Regularly check the Micro USB cable for any signs of wear or damage.

Dépannage

Caractéristiques

• Marque: Baseus
• Type de connecteur : USB, sans fil
• Appareils compatibles : Qi-enabled Smartphones (4.0"-6.5")
• Modèles de téléphones compatibles : iPhone Xs, Xs Max, XR, X, 8, 8 Plus; Samsung Galaxy S10, S10 Plus, S10e, S9, S9 Plus, S8, S8 Plus, S7, S7 edge, S6 edge plus, Note 9, Note 5 series devices.
• Dossier spécial : Chargement rapide
• Couleur: Noir
• Vol d'entréetage: 9 volts
• Ampâge : 1.67 Amps
• Nombre total de ports USB : 1
• Poids de l'article : 10.2 onces
• Dimensions du colis : 8.15 x 4.45 x 2.91 pouces

Garantie et assistance

This Baseus Wireless Car Charger Mount comes with an Garantie de 18 mois from the date of purchase. Baseus also provides service client à vie pour ce produit.

For warranty claims, technical support, or any inquiries, please refer to the contact information provided with your purchase or visit the official Baseus website.