Furuno SC702

Furuno SC702 Display Unit User Manual

Model: SC702 | Brand: Furuno

1. Introduction

The Furuno SC702 is the display unit component of the SC70/SC130 Satellite Compass system. This system utilizes advanced GNSS (Global Navigation Satellite System) technology, including GPS, Galileo, and GLONASS, to provide highly accurate navigation data. The SC702 display unit presents critical information such as heading, speed over ground (SOG), course over ground (COG), and rate of turn (ROT), essential for safe and precise vessel operation. This manual provides detailed instructions for the setup, operation, and maintenance of your SC702 display unit.

2. Composants terminésview

The SC70/SC130 Satellite Compass system typically includes the following main components:

Furuno SC702 Display Unit, Junction Box, and GPS Antenna
Image 2.1: The Furuno SC702 Display Unit (top), the SC701 Junction Box (bottom left), and the SC703 GPS Antenna (bottom right). These components work together to provide accurate navigation data.

3. Configuration et installation

Proper installation is crucial for the optimal performance of your Furuno SC70/SC130 system. It is highly recommended that installation be performed by a qualified marine electronics technician.

3.1. Mounting the SC702 Display Unit

The SC702 display unit can be mounted on a dashboard or panel. Ensure the mounting location is secure, provides good visibility, and is protected from direct exposure to harsh weather conditions if not rated for such exposure. Allow sufficient space for cable connections at the rear of the unit.

3.2. Connexion des composants

Connect the SC702 Display Unit, SC701 Junction Box, and SC703 GPS Antenna using appropriate cables (sold separately). The junction box acts as the central hub for power and data distribution. Refer to the detailed wiring diagrams provided in the full installation manual for specific connection points and cable types. Ensure all connections are secure and waterproofed as necessary.

3.3. Connexion électrique

Connect the system to a stable DC power source (typically 12-24V DC) via the SC701 Junction Box. Ensure proper fusing and circuit protection are in place according to marine electrical standards.

3.4. Mise sous tension et configuration initiales

After all components are connected, power on the system. The SC702 display will initiate. Follow the on-screen prompts for initial setup, including language selection, time zone, and basic navigation settings. Calibration of the compass may be required after installation to ensure maximum accuracy.

4. Mode d'emploi

The SC702 display unit is designed for intuitive operation using its integrated buttons and clear display.

4.1. Afficher plusview

The main display screen provides real-time navigation data. Key indicators include:

4.2. Fonctions des boutons

The SC702 features several dedicated buttons for easy navigation and control:

4.3. Navigation dans les menus

Appuyez sur le MENU/ÉCHAP button to access the main menu. Use the navigation buttons to scroll through menu options. Press ORL pour sélectionner une option. Appuyez sur MENU/ÉCHAP again to go back or exit the menu.

5. Entretien

Regular maintenance ensures the longevity and reliable performance of your SC702 display unit and the entire satellite compass system.

5.1. Nettoyage

Essuyez l'écran et l'unité casing avec un doux, damp chiffon. N’utilisez pas de nettoyants abrasifs, de solvants ou de produits chimiques agressifs, car ils pourraient endommager l’écran ou le câble.asing. Assurez-vous que l'appareil est hors tension avant de le nettoyer.

5.2. Mises à jour logicielles

Periodically check the Furuno website or consult with a Furuno dealer for available software updates. Updates can provide performance enhancements, new features, or bug fixes. Follow the instructions provided with the update package carefully.

5.3. Inspection des câbles et des connexions

Regularly inspect all cables and connections for signs of wear, corrosion, or damage. Ensure all connections remain secure and waterproof, especially in a marine environment.

6. Dépannage

This section provides basic troubleshooting steps for common issues. For more complex problems, contact Furuno support or a certified service technician.

7. Spécifications

FonctionnalitéSpécification
Poids de l'article26.3 livres
Dimensions du colis17 x 15 x 7 pouces
Commande vocaleBoutons
ASINB07PWH7647
Date de première disponibilité21er mars 2019
FabricantFuruno
MarqueFuruno
Type de service de véhiculeBateau
Dossier spécialSBAS Compatibility, IMO Type-approved
Technologie de connectivitéEthernet
Type de carteNorth America, Satellite
Composants inclusJunction box, Display unit, GPS antenna
Type de montageSupport de tableau de bord, support de panneau
Type d'écran tactileRésistif
Entrée de l'interface humaineBoutons

8. Garantie et assistance

Furuno stands behind its products. For any technical assistance or inquiries, expert advice is available. In the event of damaged or defective items, return shipping will be covered by the seller. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Furuno warranty documentation or contact Furuno customer service.

For further support, visit the official Furuno USA website or contact your authorized Furuno dealer.

Documents connexes - SC702

Préview Manuel d'utilisation du compas satellite FURUNO SC-70/SC-130
Manuel d'utilisation du compas satellite FURUNO SC-70 et SC-130, couvrant l'installation, le fonctionnement, la maintenance, la sécurité et le dépannage des systèmes de navigation maritime.
Préview Manuel d'utilisation du compas satellite FURUNO SC-70/SC-130
Ce manuel complet fournit des instructions détaillées pour l'installation, le fonctionnement et l'entretien des systèmes de compas satellite FURUNO SC-70 et SC-130. Découvrez la technologie cinématique GPS avancée pour une navigation maritime fiable.
Préview Manuel d'utilisation du compas satellite FURUNO SCX-21
Manuel d'utilisation du compas satellite FURUNO SCX-21 : installation, fonctionnement, réglages et entretien pour la navigation maritime. Comprend les spécifications techniques et le dépannage.
Préview FURUNO 1621 MARK-2 Marine Radar Operator's Manual
Operator's manual for the FURUNO 1621 MARK-2 Marine Radar. This guide provides detailed information on installation, operation, maintenance, and troubleshooting for the FURUNO 1621 MARK-2 marine radar system.
Préview Rapport de test et spécifications techniques du radar marin FURUNO RTR-078
Ce rapport de test technique de Furuno Labotech International détaille les performances et les spécifications du système radar marin FURUNO RTR-078, couvrant la sortie RF, les émissions, la stabilité et les fonctionnalités opérationnelles pour la navigation maritime.
Préview Manuel de l'opérateur FURUNO FELCOM250/500 : Guide de la station terrestre de navire Inmarsat Fleetbroadband
Manuel d'utilisation complet des stations terriennes de navire Inmarsat Fleetbroadband FURUNO FELCOM250 et FELCOM500. Découvrez la configuration système, les opérations de base, les fonctions du combiné, les SMS, web logiciel, maintenance et dépannage.