1. Introduction
Thank you for choosing the hykolity 4FT Linkable LED Linear Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
This LED linear light is designed for various indoor applications, including commercial offices, living rooms, restaurants, exhibition halls, garages, workshops, and storage areas. It features dimmable functionality, selectable color temperatures (3000K, 4000K, 5000K), and a linkable design for seamless connections.
2. Consignes de sécurité
AVERTISSEMENT: To prevent electric shock, fire, or injury, always follow basic safety precautions when installing or using this product.
- Turn off the power at the circuit breaker before installation or maintenance.
- L'installation doit être effectuée par un électricien qualifié, conformément à tous les codes électriques nationaux et locaux applicables.
- Ce produit est destiné à utilisation en intérieur uniquement. Do not use in wet or damp emplacements.
- Assurez-vous que le luminaire est correctement mis à la terre afin d'éviter tout risque électrique potentiel.
- Ne modifiez pas le dispositif et ne l'utilisez pas à d'autres fins que celles prévues.
- Évitez de regarder directement la source lumineuse LED lorsqu'elle est allumée, car cela pourrait provoquer une fatigue oculaire.
- Conserver les matériaux d’emballage hors de portée des enfants.
3. Contenu du colis
Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact hykolity customer support.
- LED Architectural Suspended Linear Channel Light Fixture(s)
- Installation Kit (includes flexible cable mounting brackets, screws, wall anchors, and cable hanging system)
Figure 1 : Product dimensions and included accessories, including mounting brackets and cables.
4. Configuration et installation
Important: Ensure power is OFF at the circuit breaker before starting installation.
- Adjust Cable Mounting Bracket: According to your installation requirements, adjust the linear fixture using the flexible cable mounting bracket. Double-check that the cable holds tightly and securely.
- Retirer le capot avant : Use appropriate tools to carefully remove the front cover of the LED linear light.
- Connecter le câblage : Connect the AC (Live), N (Neutral), and GND (Ground) wires. If dimming functionality is desired, connect the dimmable wires (purple/gray, minimum 24 AWG, rated min 105°C, 300V). If dimming is not needed, these wires can be capped off. After connecting, put the back cover in place.
- Route AC and Dimmable Wires: Break through the designated hole in the cover using a cutting nipper. Route the AC wire and dimmable wire into the LED linear fixture. If dimming is unnecessary, no connection to the dimmable wire is required.
Figure 2 : Detailed installation steps for the hykolity LED Linear Light.
Conception connectable
This fixture features a unique linkable design, allowing you to connect up to 10 lights in series seamlessly. Ensure proper electrical connections between linked units.
Figure 3 : Illustration of the linkable design and connection process.
5. Mode d'emploi
Marche/Arrêt
Once installed and wired correctly, the light can be turned on or off using a standard wall switch connected to the fixture's power supply.
Fonctionnalité de gradation
The hykolity LED Linear Light supports 0-10V dimming, allowing brightness adjustment from 10% to 100%. For optimal performance, use compatible 0-10V dimmers such as Lutron: IP710-40F or Legrand: RH4FBL3P.
Figure 4 : Smooth dimming capability of the LED linear light.
Sélection de la température de couleur (CCT)
This fixture offers three selectable color temperatures: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). The CCT can be adjusted via a switch located on the fixture, allowing customization to suit different environments and preferences.
6. Entretien
Regular maintenance ensures optimal performance and longevity of your LED linear light.
- Nettoyage: Ensure the power is turned off before cleaning. Wipe the fixture with a soft, dry, or slightly damp Chiffon. N’utilisez pas de nettoyants abrasifs, de solvants ou de produits chimiques agressifs, car ils pourraient endommager la finition ou les composants électriques.
- Inspection: Periodically inspect the fixture for any signs of damage, loose connections, or wear. If any issues are found, discontinue use and consult a qualified electrician or contact customer support.
- Remplacement de l'ampoule : This fixture uses integrated LED chips and does not require bulb replacement. The expected lifespan is 50,000 hours.
7. Dépannage
If you encounter issues with your hykolity LED Linear Light, refer to the following troubleshooting guide:
| Problème | Cause possible | Solution |
|---|---|---|
| La lumière ne s'allume pas | Pas d'alimentation électrique Câblage incorrect Interrupteur défectueux | Vérifiez le disjoncteur et l'interrupteur mural. Verify all wire connections (AC, Neutral, Ground) are secure and correct. Vérifiez le bon fonctionnement de l'interrupteur. |
| La lumière vacille ou faiblit de façon irrégulière | Gradateur incompatible Câblage desserré Circuit surchargé | Ensure a 0-10V compatible dimmer is used (e.g., Lutron IP710-40F, Legrand RH4FBL3P). Check dimmable wire connections. Consult an electrician to check circuit load. |
| Cannot change color temperature (CCT) | CCT switch not set | Locate the CCT selection switch on the fixture and adjust to the desired setting (3000K, 4000K, or 5000K). |
| Multiple linked lights not working | Connection issue between units Exceeded maximum linkable units | Check the physical and electrical connections between all linked fixtures. Ensure no more than 10 units are linked in series. |
8. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Marque | hykolité |
| Nom du modèle | HBLL-FLC03 |
| Dimensions du produit | 44"L x 2.6"l x 2.8"H |
| Poids de l'article | 5.5 livres (par unité) |
| Quoitage | 40 watts |
| Luminosité | 4800 lumens |
| Température de couleur (CCT) | 3000K / 4000K / 5000K sélectionnable |
| Gradable | 0-10V Dimmable (10%-100%) |
| Voltage | 100-277 Volts |
| Type de source lumineuse | DIRIGÉ |
| Matériel | Aluminium, polyester |
| Type de finition | Peint |
| Type d'installation | Suspendu |
| Utilisation intérieure/extérieure | Uniquement en intérieur |
| Durée de vie moyenne | 50,000 heures |
| Indice de rendu des couleurs (IRC) | 90.0 |
| Certifications | ETL & CE Certified |
9. Garantie et assistance
Informations sur la garantie
This hykolity LED Linear Light comes with a Garantie illimitée d'un an against any defects in materials and workmanship from the date of purchase.
Assistance clientèle
For any questions, technical assistance, warranty claims, or support needs, please contact hykolity customer service. Refer to your purchase platform for contact details or visit the official hykolity website pour les options de support.
