Introduction
Merci pour votre achatasing the DigiTech Portable Wireless UHF Lapel Microphone System. This system is designed to provide clear, reliable audio transmission for various applications, including presentations, public speaking, and recording. Its compact and portable design ensures ease of use and mobility.
Contenu du colis
Veuillez vérifier attentivement le colis pour vous assurer que tous les articles sont présents et en bon état.
- 1 x UHF Wireless Receiver/Speaker Unit
- 1 x UHF Wireless Transmitter with Lapel Microphone
- 1 x câble de chargement USB
- 1 x adaptateur secteur
- 1 x Bandoulière
- 1 x Manuel d'utilisation (ce document)
Image: All components included in the package, showing the receiver/speaker, transmitter with lapel microphone, charging cable, power adapter, and shoulder strap.
Caractéristiques du produit
- Conception portable et légère pour un transport facile.
- UHF wireless technology for stable and clear audio transmission.
- Includes a sensitive lapel microphone for hands-free operation.
- Batteries rechargeables intégrées pour une utilisation prolongée.
- Entrée auxiliaire pour la connexion de sources audio externes.
- Single channel operation.
- Signal-to-noise ratio of 75 dB for clear sound.
- USB connectivity for charging.
- Compatible avec amplifiers et haut-parleurs.
- Up to 7 selectable frequencies (as per product packaging).
Guide d'installation
1. Chargement des appareils
Before first use, fully charge both the receiver/speaker unit and the transmitter unit. Use the provided USB charging cable and power adapter.
- Connect the USB charging cable to the charging port on each device.
- Plug the other end of the USB cable into the power adapter, then plug the adapter into a standard wall outlet.
- The charging indicator light (usually red) will turn off or change color (e.g., blue) once fully charged.
2. Appairage de l'émetteur et du récepteur
The transmitter and receiver are typically pre-paired from the factory. If they do not connect automatically, follow these steps:
- Ensure both the receiver and transmitter are powered off.
- Allumez le récepteur.
- Press and hold the "Pair" button on the transmitter unit while simultaneously turning it on.
- Hold the "Pair" button until the indicator light on both units shows a stable connection (e.g., solid blue light).
- If pairing fails, repeat the process. Ensure no other wireless devices are interfering.
Image: The main components of the system, the receiver/speaker unit and the transmitter with its attached lapel microphone.
3. Connecting to an External Device (Optional)
If you wish to use the system with an external amplifier or speaker, use the appropriate audio cable (not included) to connect the receiver's audio output to the input of your external device.
Mode d'emploi
1. Marche/Arrêt
- To power on, slide the power switch on both the receiver and transmitter to the "ON" position.
- To power off, slide the power switch on both units to the "OFF" position.
2. Réglage du volume
Adjust the volume using the volume control knob or buttons on the receiver/speaker unit. Start with a low volume and gradually increase it to a comfortable level.
3. Using the Lapel Microphone
Clip the lapel microphone to your clothing, approximately 6-12 inches (15-30 cm) from your mouth, for optimal sound pickup. Ensure the microphone is not covered by clothing.
4. Frequency Selection (if applicable)
If your system supports multiple frequencies, refer to the specific instructions on the transmitter for changing channels. This is useful in environments with wireless interference.
Entretien
- Nettoyage: Utilisez un chiffon doux et sec pour nettoyer l'extérieur des appareils. N'utilisez pas de nettoyants liquides ni de solvants.
- Entretien de la batterie: To prolong battery life, avoid fully discharging the batteries frequently. Charge them regularly, even if the device is not in use for extended periods (e.g., once every 3 months).
- Stockage: Conservez le système dans un endroit frais et sec, à l'abri de la lumière directe du soleil, des températures extrêmes et d'une forte humidité.
- Manutention: Handle the units with care. Avoid dropping them or exposing them to strong impacts.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| No sound from receiver/speaker. |
|
|
| Poor sound quality (static, dropouts). |
|
|
| L'émetteur ne s'appaire pas. |
|
|
Caractéristiques
| Marque | DigiTech |
| Modèle | B07PFTTT7S |
| Source d'énergie | Électrique filaire, Alimenté par batterie |
| Type de connecteur | Aux |
| Nombre de canaux | 1 |
| Entrée audio | Wireless Microphone, Auxiliary |
| Caractéristiques spéciales | Sans fil |
| Format du microphone | Système de microphone |
| Rapport signal sur bruit (SNR) | 75 dB |
| Poids de l'article | 480 g |
| Dimensions du colis | 18.8 x 16.1 x 7.9 cm |
| Technologie de connectivité | USB (pour le chargement) |
| Couleur | Noir |
| Appareils compatibles | Amplificateur, Orateur |
| Type de montage | Portable |
Garantie et assistance
This DigiTech product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included in your package or visit the official DigiTech website. For technical support, troubleshooting assistance, or to inquire about repairs, please contact DigiTech customer service through their official channels.
Veuillez conserver votre preuve d'achat pour les réclamations au titre de la garantie.
