Streamlight TLR-6 Tactical Weapon Light User Manual

Introduction

The Streamlight TLR-6 is an ultra-compact tactical weapon light designed to securely attach to the trigger guard of specific Glock models (42, 43, 43X, 48 without rail or MOS). This non-laser model provides 100 lumens of bright white light, enhancing visibility in low-light conditions. Its design allows for convenient, tool-less battery replacement without needing to remove the light from the weapon.

Devant view of the Streamlight TLR-6 Tactical Weapon Light, showcasing its compact design and integrated light.

Configuration et installation

Before installation, ensure your firearm is unloaded and safe. Always follow proper firearm safety procedures.

Contenu du colis :

• TLR-6 for Glock 42/43/43X/48
• CR 1/3N battery
• .050 hex wrench
• Mode d'emploi
• Streamlight logo sticker
• Streamlight Strong brochure

Contents included in the Streamlight TLR-6 package.

Compatibilité:

This TLR-6 model is specifically designed for Glock 42, Glock 43, Glock 43X (Black, non-rail/MOS), and Glock 48 (Black, non-rail/MOS) firearms. It is not compatible with Glock models featuring rails or MOS systems.

Visual guide illustrating compatible and incompatible Glock models for the TLR-6.

Pièce jointe:

1. Separate the two halves of the TLR-6 housing.
2. Carefully position the light around the trigger guard of your compatible Glock firearm.
3. Align the screw holes on both halves of the housing.
4. Insert and tighten the provided screws using the .050 hex wrench until the light is securely fastened to the trigger guard. Do not overtighten.

Installation de la batterie :

The TLR-6 uses one CR 1/3N lithium metal battery. A battery is included with the product.

1. Ensure the light is detached from the firearm or the battery compartment is accessible.
2. Open the battery compartment. The TLR-6 is designed for tool-less battery replacement without removal from the weapon, typically by opening a latch or cover.
3. Insert the CR 1/3N battery with the correct polarity as indicated inside the compartment.
4. Fermez soigneusement le compartiment à piles.

Mode d'emploi

The TLR-6 features simple controls for activating the light.

Activation de la lumière :

• Momentané activé : Press and hold either of the activation buttons located on the sides of the light. The light will remain on as long as the button is held.
• Marche/Arrêt constant : Quickly press and release either activation button to turn the light on. Press and release again to turn the light off.

The TLR-6 provides 100 lumens of bright white light.

Vidéos officielles du produit :

There are no official seller-created product videos available for this model that meet the specified criteria for inclusion in this manual.

Entretien

Regular maintenance ensures optimal performance and longevity of your TLR-6.

Nettoyage:

• Essuyez l'extérieur de la lampe avec un chiffon doux et sec.amp chiffon pour enlever la saleté et les débris.
• Do not use abrasive cleaners or solvents, as these can damage the polymer housing or lens.
• Ensure the lens is clean for maximum light output.

Remplacement de la batterie :

When the light output diminishes, it's time to replace the battery. The TLR-6 uses one CR 1/3N lithium metal battery.

1. Open the battery compartment as described in the Setup section.
2. Retirez l'ancienne batterie.
3. Insert a new CR 1/3N battery, observing the correct polarity.
4. Fermez soigneusement le compartiment à piles.

Dépannage

If you encounter issues with your TLR-6, try the following steps:

• La lumière ne s'allume pas :
  • Vérifiez que la pile est correctement insérée et que la polarité est respectée.
  • Assurez-vous que le compartiment à piles est complètement fermé.
  • Remplacez la batterie par une neuve.
  • Verify the light is securely attached to the firearm and connections are firm.
• Sortie de lumière faible :
  • The battery may be low. Replace it with a new CR 1/3N battery.
  • Clean the lens surface to remove any dirt or smudges.
• Attachement lâche :
  • Re-tighten the attachment screws using the .050 hex wrench. Do not overtighten.

If problems persist after attempting these troubleshooting steps, please contact Streamlight customer support.

Caractéristiques

Garantie et assistance

The Streamlight TLR-6 comes with a Garantie à vie limitée. For detailed warranty information, claims, or technical support, please refer to the official Streamlight webconsultez le site ou contactez directement leur service client.

You can visit the Streamlight store for more information: Streamlight Store