Manuel d'utilisation du lecteur de codes-barres Bluetooth 2D KOAMTAC KDC350Ci-G6SR-3K-R2-WFG

1. Introduction

This manual provides comprehensive instructions for the safe and efficient operation of your KOAMTAC KDC350Ci-G6SR-3K-R2-WFG 2D Imager Bluetooth Barcode Scanner. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. Produit terminéview

The KOAMTAC KDC350Ci-G6SR-3K-R2-WFG is a versatile 2D imager Bluetooth barcode scanner designed for efficient data collection. It features a built-in display and keypad for interactive data collection and a rechargeable battery for extended use.

Figure 1 : Face avant view of the KOAMTAC KDC350Ci-G6SR-3K-R2-WFG barcode scanner, showing the display, scan button, and navigation keys.

Caractéristiques principales :

• Imageur 2D : Capable of scanning various 1D and 2D barcodes.
• Connectivité Bluetooth : Bluetooth V2.1+EDR, Class 2, supporting HID/SPP/MFi profiles for wireless connection to compatible devices.
• Integrated Display and Keypad: Allows for interactive data collection and eliminates blind data entry errors.
• Large Data Memory: Basic 160KB, with an optional 4MB, capable of storing over 100,000 product databases.
• Batterie longue durée : Easy-to-replace rechargeable battery supports over 25,000,000 barcode scans on a single charge.
• Sanitizer Compatibility: Safe for use with Clorox Healthcare Bleach Germicidal Wipes, Curity Alcohol Prep Pads, and Sani-Cloth AF3 Germicidal Disposable Wipes.
• Support logiciel: Includes FREE KT Sync software (keyboard wedging, application generation, DB lookup, inventory management) and FREE SDK with technical support.
• Compatibilité des accessoires : Designed for use with the KOAMTAC Waterproof Finger Trigger Glove.

3. Installation

3.1 Chargement de l'appareil

Before initial use, fully charge the KDC350. Connect the device to a USB power source using the provided USB cable. The charging indicator light will illuminate during charging and turn off when fully charged.

3.2 Mise sous/hors tension

• Pour allumer : Press and hold the power button (usually the 'SCAN' button or a dedicated power button, refer to device markings) until the display illuminates.
• Pour éteindre : Press and hold the power button until the device powers down, or navigate through the menu to select 'Power Off'.

3.3 Couplage Bluetooth

1. Assurez-vous que le KDC350 est allumé.
2. On the KDC350, navigate to the Bluetooth menu.
3. Select 'Pairing Mode' or 'Discoverable Mode'.
4. Sur votre appareil hôte (smartphone, tablette, PC), activez le Bluetooth et recherchez les appareils disponibles.
5. Select 'KDC350' from the list of found devices.
6. Follow any on-screen prompts to complete the pairing process. A successful connection will be indicated on both devices.

4. Mode d'emploi

4.1 Lecture des codes-barres

1. Point the KDC350's scanning window at the barcode you wish to scan.
2. Press the 'SCAN' button. A red aiming beam will appear.
3. Positionnez le faisceau de visée au centre du code-barres.
4. A successful scan will be indicated by an audible beep and/or a green LED flash. The scanned data will appear on the KDC350's display and/or be transmitted to the connected host device.

4.2 Data Collection Modes

The KDC350 supports various data collection modes. Refer to the device's on-screen menu for options such as:

• Keyboard Wedge Mode: Transmits scanned data directly as keyboard input to the connected device.
• Application Mode: Utilizes KOAMTAC's KT Sync software for advanced data management and inventory functions.
• Mode par lots : Stores scanned data internally for later upload.

4.3 Utilisation du clavier et de l'écran

The integrated keypad and display allow for navigation through menus, manual data entry, and verification of scanned information. Use the navigation keys (left/right arrows) and the 'SCAN' button (often acts as 'Enter' or 'Select') to interact with the device's interface.

5. Entretien

5.1 Nettoyage de l'appareil

To maintain optimal performance, keep the scanning window and device exterior clean. Use a soft, lint-free cloth. For disinfection, the KDC350 is safe to use with:

• Lingettes germicides à l'eau de Javel Clorox Healthcare
• Curity Alcohol Prep Pads
• Sani-Cloth AF3 Germicidal Disposable Wipes

Do not immerse the device in liquid. Avoid using abrasive cleaners or solvents.

5.2 Remplacement de la batterie

The KDC350 features an easy-to-replace rechargeable battery. Refer to the device's specific instructions for battery compartment access and replacement procedures. Use only KOAMTAC approved replacement batteries.

6. Dépannage

If the problem persists, please contact KOAMTAC support.

7. Spécifications

• Modèle: KDC350Ci-G6SR-3K-R2-WFG
• Numéro de modèle de l'article : 348163
• Type de scanner: Imageur 2D
• Connectivité : Bluetooth V2.1+EDR, Class 2 (HID/SPP/MFi), USB Cable
• Appareils compatibles : Ordinateur de bureau, ordinateur portable, smartphone
• Source d'alimentation : Alimenté par batterie, électrique filaire
• Mémoire de données: Basic 160KB, Optional 4MB
• Poids de l'article : 1 livres
• Dimensions du colis : 15 x 6 x 3 pouces
• Fabricant: KOAMTAC Inc.
• Code GTIN: 08809355874500

8. Garantie et assistance

Pour obtenir des informations sur la garantie et une assistance technique, veuillez consulter le site officiel de KOAMTAC. website or contact their customer service department. The product includes FREE SDK with technical support from KOAMTAC engineers and development staff.

Fabricant: KOAMTAC Inc.