Oceanic RO HYDRO-PAL 4-Stage RODI Compact Reverse Osmosis Water Filtration System User Manual

1. Introduction

This manual provides essential instructions for the installation, operation, and maintenance of your Oceanic RO HYDRO-PAL 4-Stage RODI Compact Reverse Osmosis Water Filtration System. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your system. This system is designed to provide high-quality filtered water for various applications, including drinking and aquarium use.

2. Produit terminéview

The Oceanic RO HYDRO-PAL is a compact, pre-assembled 4-stage Reverse Osmosis Deionization (RODI) system. It effectively removes various contaminants from tap water, providing purified water. The system includes pre-filter cartridges, a reverse osmosis membrane, and a deionization cartridge.

Figure 2.1 : The Oceanic RO HYDRO-PAL 4-Stage RODI Compact Reverse Osmosis Water Filtration System. This image displays the complete, pre-assembled unit with its various filter staget.

2.1 Filtration Stages

Les 4-stage system utilizes a combination of filtration methods to achieve high purity water:

1. Inline Sediment Filter: Removes dirt, rust, dust, chemical resistance, sand, and scale particles.
2. Inline Carbon Filter: Used to polish the taste of the water and remove any residue. Made with quality apricot shell, olives, walnut shell, and palm shell, ensuring clean water.
3. Membrane osmose inverse : Removes up to 99% of total dissolved solids (TDS) and contaminants such as arsenic, lead, fluoride, chromium, radium, bacteria, and viruses.
4. Deionization (DI) Cartridge: Removes almost all remaining mineral ions, such as cations like sodium, calcium, iron, and copper, and anions like chloride and sulfate, producing ultra-pure water.

Figure 2.2 : Detailed diagram illustrating the four stages of filtration within the Oceanic RO HYDRO-PAL system, highlighting the function of each filter cartridge.

3. Consignes de sécurité

• Always turn off the water supply before performing any maintenance or filter changes.
• Assurez-vous que tous les raccords sont bien fixés afin d'éviter les fuites.
• Do not expose the system to freezing temperatures, as this can damage components.
• Operate the system within the specified pressure and temperature ranges to avoid damage.
• Tenez le système à l'écart de la lumière directe du soleil et des sources de chaleur.
• This system is designed for cold water use only.

4. Configuration et installation

The Oceanic RO HYDRO-PAL system comes pre-assembled for ease of installation. A garden hose adapter is included for convenient connection to a water source.

4.1 Déballage

• Retirez soigneusement tous les composants de l'emballage.
• Verify that all parts are present: pre-assembled RO unit, cartridges, membrane (pre-installed), garden hose adapter, and tubing.
• Inspect the system for any visible damage. If damage is found, do not proceed with installation and contact customer support.

4.2 Connection to Water Supply

1. Locate a cold water source, such as a garden hose spigot or a utility sink faucet.
2. Attach the provided garden hose adapter to the cold water supply.
3. Connect the inlet tubing from the RO system to the garden hose adapter. Ensure a tight, leak-free connection.
4. Identify the purified water outlet and the drain line. Position the drain line to discharge into a suitable drain.
5. Ensure the purified water outlet is directed to a collection container.

4.3 Chasse d'eau initiale

Before first use, it is crucial to flush the system to remove any carbon fines or manufacturing residues.

1. Turn on the cold water supply slowly.
2. Allow the system to run for at least 30-60 minutes, or until the water runs clear and any air bubbles are purged.
3. Discard the water produced during this initial flush.
4. Vérifiez l'étanchéité de tous les raccords. Resserrer les raccords qui fuient.

5. Fonctionnement

The Oceanic RO HYDRO-PAL system operates by continuously filtering water when connected to a pressurized water source. It is rated for up to 75 gallons per day (GPD) production.

5.1 Exigences opérationnelles

• Pression d'eau minimale : 40 PSI
• Pression d'eau maximale : 80 PSI
• Optimal Water Temperature: 77°F (25°C)
• Température maximale de l'eau : 105°F (40.5°C)
• Typical Rejection Rate: 1:3 (purified water to drain water ratio)

Operating outside these parameters may reduce system performance or cause damage.

Figure 5.1 : Visual representation of the operating parameters for the Oceanic RO HYDRO-PAL system, including pressure and temperature ranges, and its suitability for reef tanks and aquariums.

6. Entretien

Un entretien régulier, notamment le remplacement des filtres, est essentiel pour garantir le bon fonctionnement et la longévité de votre système d'osmose inverse.

6.1 Calendrier de remplacement du filtre

• Sediment and Carbon Pre-filters: À remplacer tous les 6 à 12 mois, selon la qualité de l'eau et l'utilisation.
• Membrane osmose inverse : Replace every 2-3 years, or when the purified water TDS level significantly increases.
• Deionization (DI) Cartridge: Replace when the TDS of the purified water starts to rise above 0 ppm, typically indicated by a TDS meter. The lifespan varies greatly depending on the incoming water quality.

6.2 Remplacement des filtres

1. Coupez l'alimentation en eau du système d'osmose inverse.
2. Disconnect the inlet tubing.
3. Carefully remove the old filter cartridges by unscrewing or unclipping them from their housings.
4. Insert new, compatible filter cartridges, ensuring they are correctly oriented and securely seated.
5. Reconnect the inlet tubing and slowly turn on the water supply.
6. Flush the system as described in Section 4.3 to remove air and carbon fines from new filters.
7. Check for leaks after replacement.

7. Dépannage

8. Spécifications

9. Garantie et assistance

For warranty information, technical support, or to inquire about replacement parts, please contact Oceanic Water Systems directly. Contact details may be found on the product packaging or the official Oceanic website.

For specific inquiries or to order a different adapter, you may contact Oceanic at 661-575-0033 prior to ordering.