1. Introduction
The GameMax Mirage 120mm PC Cooling Fan is designed to provide efficient cooling for computer components while offering customizable RGB lighting. This fan features a dual-ring Rainbow LED design, a hydraulic bearing for quiet operation, and a 7-blade fan structure. It is compatible with 5V addressable 3-pin Aura Sync systems, allowing for synchronized lighting effects with compatible motherboards or controllers.
Illustration 1.1 : Avant view of the GameMax Mirage fan with active Rainbow LED lighting.
2. Consignes de sécurité
- Assurez-vous que votre système informatique est éteint et débranché de la prise murale avant toute installation ou maintenance.
- Handle components with care to avoid damage from static electricity. Consider using an anti-static wrist strap.
- Do not force connectors. Ensure correct orientation before plugging in cables.
- Tenez le ventilateur éloigné des liquides et de l'humidité excessive.
- Do not attempt to disassemble the fan unit beyond what is described in this manual.
3. Contenu du colis
Vérifiez que tous les éléments sont présents dans votre colis :
- 1 x GameMax Mirage 120mm PC Cooling Fan
- 4 x vis de montage
Image 3.1: Retail packaging for the GameMax Mirage fan.
4. Configuration et installation
Follow these steps to install your GameMax Mirage 120mm PC Cooling Fan:
- Préparez votre système : Power off your computer and unplug it from the power outlet. Open your computer case to access the fan mounting locations.
- Monter le ventilateur : Position the fan in your desired location (e.g., case front, rear, top, or radiator). Ensure the airflow direction is correct for your cooling setup. Use the four included mounting screws to secure the fan to the chassis or radiator. The fan features rubber pads on the corners to help reduce vibration.
- Brancher l'alimentation du ventilateur : Locate the 3-pin power connector on the fan cable. Connect this cable to an available 3-pin fan header on your motherboard or a fan controller.
- Connecter l'éclairage RGB : Locate the 5V addressable 3-pin Aura connector on the fan cable. Connect this to a compatible 5V ARGB header on your motherboard (often labeled 'VDG' or 'ARGB') or an external RGB controller/hub. Warning: Do not connect this to a 12V RGB header, as it will damage the LEDs.
Image 4.1: The 3-pin power connector (top) and 5V addressable 3-pin Aura connector (bottom).
The fan cables are braided for improved aesthetics and durability, helping to keep your build neat and tidy.
5. Mode d'emploi
Once installed, the GameMax Mirage fan operates as follows:
- Contrôle de la vitesse du ventilateur : The fan speed is controlled via the 3-pin power connector. If connected to a motherboard fan header, the speed can typically be adjusted through your motherboard's BIOS/UEFI settings or dedicated software.
- Contrôle de l'éclairage RVB : The Rainbow LED lighting is controlled via the 5V addressable 3-pin Aura connector.
- If connected to a compatible motherboard (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync), you can use the motherboard's software to customize lighting effects, colors, and synchronization with other ARGB components.
- If connected to an external RGB hub/controller, refer to the instructions provided with your specific hub/controller for lighting customization options.
Image 5.1 : Inclinée view of the GameMax Mirage fan showcasing its dual-ring Rainbow LED lighting.
6. Entretien
Un entretien régulier contribue à garantir des performances optimales et une longue durée de vie à votre ventilateur de refroidissement :
- Nettoyage de la poussière : Periodically inspect the fan blades and frame for dust accumulation. Use compressed air or a soft brush to gently remove dust. Ensure the fan is powered off and unplugged before cleaning.
- Inspection des câbles : Occasionally check the power and RGB cables for any signs of wear or damage.
7. Dépannage
- Ventilateur non rotatif :
- Ensure the 3-pin power connector is securely plugged into a functional fan header on the motherboard or controller.
- Check motherboard BIOS/UEFI settings to ensure the fan header is enabled and configured correctly.
- LEDs Not Lighting Up or Incorrect Colors:
- Verify the 5V addressable 3-pin Aura connector is securely connected to a compatible 5V ARGB header (not 12V RGB).
- Ensure your motherboard's RGB software or external controller is properly installed and configured.
- If using a splitter or hub, ensure it is powered and functioning correctly.
- Bruit excessif :
- Vérifiez la présence de câbles ou d'obstructions qui pourraient gêner les pales du ventilateur.
- Ensure the fan is securely mounted and the rubber pads are properly seated to absorb vibrations.
- Dust accumulation can cause imbalance and noise; clean the fan as described in the Maintenance section.
8. Spécifications
| Fonctionnalité | Spécification |
|---|---|
| Modèle | MIRAGEWHITE FINS |
| Taille du ventilateur | 120 mm x 120 mm x 25 mm (0.98 x 4.72 x 4.72 pouces) |
| Type de roulement | Palier hydraulique |
| Pales de ventilateur | 7 lames |
| Type de LED | Addressable Rainbow LED (Dual-Ring) |
| Connecteur d'alimentation du ventilateur | 3 broches |
| Connecteur RVB | 5V Addressable 3-Pin Aura Connector |
| Vol d'exploitationtage | 5 Volts (for RGB) / 12 Volts (for fan motor, typical for 3-pin) |
| Classé Wattage | 3 watts |
| Vitesse de rotation maximale | 1800 tr/min |
| Niveau de bruit | Environ 25 dB(A) |
| Matériel | Rubber (for vibration dampfin) |
Image 8.1 : Dos view of the GameMax Mirage fan, displaying the product label with model and electrical specifications.
9. Garantie et assistance
Pour obtenir des informations sur la garantie et une assistance technique, veuillez consulter le site officiel de GAMEMAX. webConsultez le site web ou contactez votre revendeur. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.
