BS Battery BSLi-03

Manuel d'utilisation de la batterie au lithium BSLi-03 de BS Battery

1. Introduction

This manual provides essential information for the safe and effective use of your BS Battery BSLi-03 Lithium Battery. Designed for high performance and durability, this lithium-ion battery offers significant advantages over traditional lead-acid batteries, including reduced weight, extended service life, and improved cold-start performance. Please read this manual thoroughly before installation and operation.

BS Battery BSLi-03 Lithium Battery

Figure 1 : The BS Battery BSLi-03 Lithium Battery, showcasing its compact design and terminal layout.

2. Consignes de sécurité

Your safety is paramount. Observe the following precautions to prevent injury or damage to the battery and equipment.

  • Portez toujours un équipement de protection individuelle (EPI) approprié, notamment des lunettes de sécurité et des gants, lorsque vous manipulez des batteries.
  • Do not short-circuit the battery terminals. This can cause severe sparks, heat, and potential fire.
  • Do not disassemble, puncture, or modify the battery. Internal components are hazardous.
  • Keep the battery away from open flames, excessive heat, and direct sunlight.
  • Évitez de faire tomber la batterie ou de la soumettre à des chocs violents.
  • Si la batterie casing is damaged, discontinue use immediately and dispose of it properly.
  • Do not immerse the battery in water or other liquids. While waterproof, prolonged submersion is not recommended.
  • Dispose of spent batteries according to local regulations. Lithium batteries require special recycling procedures.
  • Avertissement concernant la Proposition 65 : Ce produit peut contenir des produits chimiques reconnus par l'État de Californie pour provoquer le cancer et des anomalies congénitales ou d'autres troubles de la reproduction.

3. caractéristiques du produit

The BS Battery BSLi-03 Lithium Battery incorporates advanced technology for superior performance:

  • Conception légère : Up to 70% lighter than traditional lead-acid batteries, improving vehicle handling and performance.
  • Durée de vie prolongée : Offers a significantly longer lifespan and over 2000 charge cycles.
  • Faible autodécharge : Maintains charge for extended periods, allowing for engine starts even after long periods of inactivity.
  • Charge rapide : Capable of rapid recharging.
  • Multi-Position Waterproof Design: Can be installed in various orientations (up to 180°) and is resistant to water ingress.
  • Respectueux de l'environnement : Contains no acids or heavy metals, making it non-toxic and environmentally conscious.
  • Haute résistance à la chaleur : Resistant to temperatures up to 230°C.
  • Prêt à l'emploi : Plug and play functionality for immediate operation.
  • Impressive Low Temperature Performance: Reliable starting power even in cold conditions.
  • Indicateur d'état de charge : Integrated button and LED display to check battery charge level.
BSLi-03 Lithium Battery Features

Figure 2 : Visual representation of key features including rapid charging, lightweight, waterproof, and high charge cycles.

4. Configuration et installation

Follow these steps for proper installation of your BSLi-03 Lithium Battery. If you are unsure, consult a qualified technician.

  1. Retirer l'ancienne batterie : Disconnect the negative (-) terminal first, then the positive (+) terminal of the old battery. Carefully remove the old battery from its compartment.
  2. Prepare New Battery: Ensure the BSLi-03 battery is clean and free from debris. No liquid filling is required as it is a sealed lithium battery.
  3. Installez une nouvelle batterie : Place the BSLi-03 into the battery compartment. Secure it firmly to prevent movement during operation.
  4. Terminal de connexion : Connect the positive (+) terminal first, then the negative (-) terminal. Ensure all connections are tight and secure.
  5. Vérifier l'installation : Double-check all connections and ensure the battery is properly seated.
Méthode de remplacement de la batterie

Figure 3 : Step-by-step visual guide for battery replacement, emphasizing correct terminal connection order.

5. Mode d'emploi

The BSLi-03 Lithium Battery is designed for straightforward operation.

  • Démarrage du moteur : Once installed, the battery is ready to provide power for engine starting.
  • Checking State of Charge: Press the integrated button on the battery to activate the LED indicator, which displays the current charge level.
BSLi-03 Battery with State of Charge Indicator

Figure 4 : The BSLi-03 battery showing its dimensions and the location of the state of charge indicator button.

6. Entretien

Minimal maintenance is required for the BSLi-03 Lithium Battery due to its advanced design.

  • Inspection régulière : Periodically check the battery terminals for corrosion and ensure connections remain tight.
  • Nettoyage: Keep the battery surface clean and dry. Use a damp chiffon si nécessaire.
  • Chargement : While the battery has a low self-discharge rate, if the vehicle is stored for extended periods, occasional charging with a compatible lithium battery charger is recommended to maintain optimal performance. Do not use chargers designed for lead-acid batteries unless they have a specific lithium mode.
  • Stockage à long terme : For optimal longevity, store the battery in a cool, dry place. The battery can maintain a charge for up to 12 months without use, allowing for engine start if stored at appropriate temperatures (10-25°C).

7. Dépannage

If you encounter issues with your BSLi-03 Lithium Battery, consider the following:

  • Le moteur ne démarre pas :
    • Vérifiez que les connexions de la batterie sont bien serrées et ne présentent aucune corrosion.
    • Verify the battery's state of charge using the indicator button. If low, recharge the battery.
    • Ensure the vehicle's charging system is functioning correctly.
  • La batterie ne tient pas la charge :
    • Confirm you are using a compatible lithium battery charger.
    • Inspect for any parasitic drains on the vehicle's electrical system.
    • If the battery is old, its capacity may have naturally diminished over time.
  • Odeur inhabituelle ou gonflement : Immediately disconnect the battery and cease use. This indicates a serious internal issue. Contact support for guidance.

Si les étapes de dépannage ne résolvent pas le problème, contactez le service client.

8. Spécifications

Key technical specifications for the BS Battery BSLi-03 Lithium Battery:

SpécificationValeur
Numéro de modèleBSLi-03
Voltage12V
Capacity (WH)36 Wh
CCA (démarrage à froid Amps)210 A
Capacity (Ah, 10Hr)3 Ah
Dimensions (L x l x H)134 mm x 65 mm x 92 mm
Poids de l'article2.2 livre (environ 1 kg)
Type de terminalÉcrou et Boulon
Numéro de pièce du fabricantBSLi-03/HJB9Q-FP/12N9-4B-1
BSLi-03 Specifications Table

Figure 5 : Detailed specifications and compatibility chart for the BSLi-03 battery.

9. Garantie et assistance

Your BS Battery BSLi-03 Lithium Battery comes with a comprehensive warranty to ensure your peace of mind.

  • Période de garantie : The BSLi-03 Lithium Battery is covered by a Garantie de 2 ans à compter de la date d'achat. Cette garantie couvre les défauts de matériaux et de fabrication dans des conditions normales d'utilisation.
  • Réclamation de garantie : In the event of a warranty claim, please retain your proof of purchase and contact the retailer or BS Battery customer support.
  • Exclusions : The warranty does not cover damage caused by improper installation, misuse, neglect, unauthorized modifications, or normal wear and tear.
BSLi-03 Warranty and Longevity Information

Figure 6 : Information highlighting the 2-year warranty, flexible mounting angle, and potential lifespan of up to 8 years with proper use.

For further assistance or technical support, please refer to the contact information provided by your retailer or visit the official BS Battery website.