Paladone Nintendo Super Mario Bros Lamp Manuel d'instructions

Introduction

Merci pour votre achatasing the Paladone Nintendo Super Mario Bros Lamp. Ceci lamp is designed to bring a retro gaming aesthetic to your space while providing ambient lighting. This manual provides essential information for the safe and proper use of your lamp.

Image: The Paladone Nintendo Super Mario Bros Lamp, featuring a Super Mario level design on the lampshade and an NES controller base.

Instructions d'installation

Follow these steps to set up your Paladone Nintendo Super Mario Bros Lamp:

1. Déballer: Retirez soigneusement tous les composants de l'emballage. Assurez-vous que leamp, lampshade, and USB cable are present.
2. Placement: Placez le lamp sur une surface stable et plane.
3. Connecter l'alimentation : Insert the Micro USB end of the included cable into the port on the NES controller base. Connect the standard USB-A end to a compatible 5V 500mA USB power source (e.g., a computer USB port, a USB wall adapter, or a power bank). Note: A wall adapter is NOT included. Using an incompatible power source may damage the lamp.

Image: Close-up of the NES controller base showing the Micro USB input port and the connected USB cable. Text on the image indicates "60" Micro USB Included. Wall Adapter NOT Included."

Mode d'emploi

Le lamp is controlled using the integrated NES controller replica base.

• Mise sous tension : Appuyez sur le Un bouton on the NES controller to turn the lamp sur.
• Éteindre: Appuyez sur le Touche B on the NES controller to turn the lamp désactivé.
• Réglage de la luminosité (atténuation) : Utilisez le Pavé directionnel (D-Pad) to cycle through the three available brightness settings. Pressing Up or Vers le bas on the D-Pad will adjust the light intensity.

Image: Diagram of the NES controller indicating that the 'A' button turns the lamp on, the 'B' button turns it off, and the D-Pad dims the light up or down. There are three dimming options.

Vidéo de démonstration du produit

Entretien

To ensure the longevity and proper functioning of your lamp:

• Nettoyage: Essuyez le lamp and controller base with a soft, dry cloth. Do not use abrasive cleaners or liquids, as they may damage the finish or electronic components.
• Stockage: En cas de non-utilisation prolongée, rangez le lamp dans un endroit frais et sec, à l'abri de la lumière directe du soleil.
• LED: Le lamp uses integrated LED lighting which is not user-replaceable.

Dépannage

Si vous rencontrez des problèmes avec votre lamp, se référer aux problèmes et solutions courants suivants :

• Lamp ne s'allume pas :
  • Assurez-vous que le câble USB est correctement connecté aux deux connecteurs.amp base and the power source.
  • Verify that the USB power source is active and providing 5V 500mA. Try a different USB port or adapter.
  • Press the 'A' button on the controller to turn the lamp sur.
• Lamp is too dim:
  • Use the D-Pad on the controller to cycle through the brightness settings. Ensure it is set to the highest level.
  • Note that this lamp is designed for ambient lighting and may not be suitable as a primary light source for tasks like reading.
• LEDs burn out prematurely:
  • Ensure you are using a 5V 500mA USB charger. Using a charger with higher voltage ou amperage than specified can damage the internal LEDs.
  • Évitez de quitter le lamp on for excessively long periods if not necessary, to prolong LED lifespan.

Caractéristiques

Image: The Paladone Nintendo Super Mario Bros Lamp with arrows and measurements indicating its height (31cm / 12.25"), lampshade width (16cm / 6.5"), and base depth (20cm / 8").

Garantie et assistance

Pour toute information relative à la garantie ou pour obtenir une assistance technique, veuillez consulter les coordonnées figurant sur l'emballage du produit ou visiter le site officiel de Paladone. webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.

Paladone Official Website: Paladone Store on Amazon