1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Ferroli Divo 15L Horizontal Electric Water Geyser. Please read these instructions carefully before using the appliance and retain them for future reference. Proper installation and adherence to these guidelines will ensure optimal performance and longevity of your water heater.
2. Consignes de sécurité
Consignes de sécurité importantes :
- Ensure the appliance is installed by a qualified technician in accordance with local regulations and safety standards.
- N’utilisez pas le chauffe-eau s’il est endommagé ou s’il présente un dysfonctionnement. Coupez immédiatement l’alimentation électrique et contactez le service d’entretien.
- Always ensure the water heater is filled with water before switching on the power supply to prevent damage to the heating element.
- Ne pas bloquer ou tamper with the pressure relief valve. This valve is crucial for safety and must be checked regularly.
- Gardez les matériaux inflammables loin du chauffe-eau.
- Les enfants doivent être surveillés pour s’assurer qu’ils ne jouent pas avec l’appareil.
- L'appareil doit être correctement mis à la terre pour éviter tout risque d'électrocution.
3. caractéristiques du produit
- Blue Forever Heating Element: Designed for durability and efficient heating.
- Long Lasting Aluminum Anode: Provides enhanced protection against corrosion, extending tank life.
- Healthy Blue Silicon Enamel Coated Tank: Ensures hygiene and resistance to rust.
- High Pressure Rating - 8 Bar: Convient aux immeubles de grande hauteur et aux applications de pompes à pression.
- Environmental Friendly CFC Free Installation: Contributes to environmental protection.
- BEE 5 Star Rated Product*: Indicates high energy efficiency, reducing electricity consumption.
- Hi-tech Thermostat Cut-out: Provides additional safety by preventing overheating.
4. Configuration et installation
The Ferroli Divo 15L water geyser is designed for horizontal wall mounting. Professional installation is highly recommended to ensure proper functioning and safety. Ensure the installation location is suitable to support the weight of the geyser when full of water and allows for easy access for maintenance.
Figure 1: Ferroli Divo Horizontal Water Geyser mounted on a tiled wall. Please note that while the image displays '25 Ltr', this manual pertains to the 15L model. The installation process is similar.
Installation Steps (Summary - consult a professional for detailed steps):
- Select a suitable wall location capable of supporting the geyser's weight.
- Mount the geyser horizontally using appropriate fasteners and brackets.
- Raccordez les tuyaux d'arrivée d'eau froide et de sortie d'eau chaude. Assurez-vous que tous les raccords sont étanches.
- Install the pressure relief valve as per manufacturer guidelines.
- Fill the geyser with water by opening a hot water tap until water flows freely, indicating the tank is full.
- Connect the electrical supply to a properly grounded outlet.
- Verify all connections and ensure no leaks before powering on.
5. Mode d'emploi
Once installed and filled with water, the Ferroli Divo 15L water geyser is ready for operation.
- Mise sous tension : Switch on the main power supply to the geyser. An indicator light (if present) will illuminate.
- Réglage de la température : Adjust the thermostat knob (if externally accessible) to your desired water temperature. For energy efficiency and safety, avoid setting the temperature too high.
- Cycle de chauffage : The geyser will begin heating the water. The heating element will automatically switch off once the set temperature is reached. It will reactivate when the water temperature drops.
- Éteindre: When not in use for extended periods, it is advisable to switch off the power supply to the geyser.
6. Entretien
Regular maintenance ensures the longevity and efficient operation of your water geyser.
- Drainage: Periodically drain the tank to remove sediment buildup, especially in areas with hard water. Consult a professional for this procedure.
- Vérification de la soupape de décharge de pression : Manually operate the pressure relief valve at least once a year to ensure it is not blocked. Follow manufacturer's instructions for this check.
- Inspection de la tige d'anode : The aluminum anode rod should be inspected and replaced periodically (typically every 1-3 years, depending on water quality) to maintain corrosion protection. This should be done by a qualified technician.
- Nettoyage: Clean the exterior of the geyser with a soft, damp chiffon. N'utilisez pas de nettoyants abrasifs ou de solvants.
- Service professionnel : It is recommended to have the geyser professionally serviced every 1-2 years.
7. Dépannage
Avant de contacter le service client, review Voici les problèmes courants et leurs solutions :
| Problème | Cause possible | Solution |
|---|---|---|
| Pas d'eau chaude | Pas d'alimentation électrique ; thermostat réglé trop bas ; élément chauffant défectueux. | Check circuit breaker/fuse; adjust thermostat; contact service for element replacement. |
| Eau chaude insuffisante | Thermostat set too low; high hot water demand; sediment buildup. | Increase thermostat setting; reduce hot water usage; drain tank (professional service). |
| Eau trop chaude | Thermostat réglé trop haut ; thermostat défectueux. | Lower thermostat setting; contact service for thermostat replacement. |
| Leaking from geyser | Loose pipe connections; faulty pressure relief valve; tank corrosion. | Tighten connections; check/replace pressure relief valve; contact service for tank inspection. |
| Bruits inhabituels | Sediment buildup in tank; faulty heating element. | Drain tank (professional service); contact service for element inspection. |
For issues not listed or if solutions do not resolve the problem, please contact Ferroli customer support.
8. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Marque | Ferroli |
| Modèle | Divo 15L Horizontal Electric Water Geyser |
| Capacité | 15 litres |
| Type de montage | Wall (Horizontal) |
| Source d'énergie | Électrique avec fil |
| Pression de service maximale | 8 barres |
| Caractéristiques spéciales | BEE 5 Star Rated Product*, Hi-tech Thermostat cut out for additional safety |
| Couleur | Blanc |
| Efficacité | Haute efficacité |
| Dimensions du produit (L x l x H) | 37.5 x 38.7 x 60.3 cm |
| Poids de l'article | 12.2 kg |
| Composants inclus | 1 Geyser |
| ASIN | B07M912GPB |
9. Garantie et assistance
Ferroli products are manufactured to high-quality standards and come with a standard warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.
For technical assistance, service requests, or to inquire about spare parts, please contact Ferroli customer support through their official website ou les coordonnées fournies dans votre documentation de garantie.
