Introduction
This manual provides essential information for the safe and efficient operation of your lightmaXX Vega Silent PAR I 14x 10W RGBWA LED PAR Spot. This LED PAR spot features 14x 10 Watt LEDs, RGBWA color mixing capabilities, and is designed for silent operation, making it suitable for various stage and event lighting applications. Please read this manual thoroughly before use and keep it for future reference.
Installation
1. Déballage
Carefully unpack the device and ensure all components are present and undamaged. Retain the original packaging for future transport or storage.
2. Montage
The Vega Silent PAR I is equipped with a mounting bracket for flexible positioning. Ensure the fixture is securely mounted to a truss, stand, or other stable surface using appropriate clamps and safety cables. Always use a safety cable as a secondary attachment.
Image : Avant view of the lightmaXX Vega Silent PAR I LED PAR spot, showing the 14 LED lenses and the adjustable mounting bracket.
Image : Côté view of the lightmaXX Vega Silent PAR I, highlighting the robust heat sink design and the side adjustment knob for the mounting bracket.
3. Connexion électrique
Connect the included power cable to the "POWER IN" socket on the rear panel of the fixture and then to a suitable power outlet. The fixture supports power linking via the "POWER OUT" socket for connecting multiple units.
Image: The included power cable, featuring an EU plug on one end and an IEC C13 connector for the fixture's power input.
4. Connexion DMX (en option)
For DMX control, connect a DMX controller to the "DMX IN" port using a 3-pin DMX cable. To daisy-chain multiple fixtures, connect the "DMX OUT" of the first fixture to the "DMX IN" of the next. Ensure the last fixture in the chain has a DMX terminator connected to its "DMX OUT" port.
Image: Rear panel of the lightmaXX Vega Silent PAR I, displaying the power input/output, DMX input/output, and the digital control display with navigation buttons.
Mode d'emploi
1. Panneau de configuration terminéview
The rear panel features a digital display and four control buttons: MENU, UP, DOWN, and ENTER. These buttons allow you to navigate through the fixture's settings and modes.
Image : Gros plan view of the digital display and control buttons (MENU, UP, DOWN, ENTER) on the rear panel, used for configuring the PAR spot.
2. Mode de contrôle DMX
To operate the fixture via DMX, set the DMX address using the control panel. Refer to the DMX channel chart (not provided in this manual, typically found in a separate DMX protocol document) for specific functions of each channel, including RGBWA color mixing, dimming, strobe, and built-in programs.
3. Modes autonomes
The fixture offers several standalone modes for operation without a DMX controller:
- Mode automatique: Cycles through pre-programmed light shows. Use the UP/DOWN buttons to select different auto programs or adjust speed.
- Mode actif sonore : The fixture reacts to sound via its built-in microphone. Adjust sensitivity using the control panel.
- Mode couleur statique : Select a fixed color by adjusting the intensity of Red, Green, Blue, White, and Amber LEDs.
Image: The lightmaXX Vega Silent PAR I projecting a vibrant red light beam, demonstrating its color output capabilities.
Image: The lightmaXX Vega Silent PAR I projecting a bright green light beam, showcasing another aspect of its RGBWA color mixing.
Entretien
1. Nettoyage
Regular cleaning of the lens and housing is recommended to ensure optimal light output and prevent overheating. Use a soft, lint-free cloth and a mild cleaning solution. Do not use abrasive cleaners or solvents.
2. Stockage
Lorsqu'il n'est pas utilisé, rangez l'appareil dans son emballage d'origine ou dans une valise de transport adaptée, dans un environnement sec et exempt de poussière.
3. Contrôles de sécurité
Inspectez régulièrement les câbles d'alimentation, les câbles DMX et les éléments de fixation afin de détecter tout signe d'usure ou de dommage. Remplacez immédiatement les composants endommagés.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Le luminaire ne s'allume pas. | Pas d'alimentation électrique ; câble défectueux ; fusible grillé. | Check power connection; test cable; replace fuse (if accessible and safe). |
| Pas de sortie lumineuse. | Dimmer at zero; incorrect mode; DMX signal issue. | Increase dimmer level; select appropriate mode; check DMX connections and address. |
| Le luminaire ne répond pas au DMX. | Adresse DMX incorrecte ; câble DMX défectueux ; aucun signal DMX. | Verify DMX address; test/replace DMX cable; ensure DMX controller is sending signal. |
| Unexpected behavior. | Interference; software glitch. | Restart the fixture; ensure proper grounding; consult support if issue persists. |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Marque | lumièremaXX |
| Modèle | Vega Silent PAR I 14x 10W RGBWA |
| Type de source lumineuse | LED (14x 10W RGBWA) |
| Dimensions du produit | 30 x 30 x 25.5 cm |
| Poids de l'article | 3.22 kilogrammes |
| Fabricant | lumièremaXX |
| Référence constructeur | LIG0015757-000 |
| ASIN | B07KXRFX2H |
| Première date disponible | 28 novembre 2018 |
| Pays d'origine | Allemagne |
| Étiquette énergétique de l'UE | G |
| Mises à jour logicielles garanties jusqu'à | Inconnu |
Garantie et assistance
Pour toute information relative à la garantie et pour obtenir une assistance technique, veuillez consulter la documentation fournie avec votre achat ou contacter votre revendeur. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.
