Introduction
Merci pour votre achatasing the JOYHILL 5 Gallon Water Bottle Dispenser. This portable and convenient water pump is designed for easy access to drinking water from 3 and 5-gallon bottles, suitable for home, kitchen, office, and outdoor activities like camping.
Composants du produit
The JOYHILL Water Bottle Dispenser typically includes the following components:
- Unité de pompe principale
- 304 Stainless steel outlet pipe (spout)
- Food-grade silicone hose
- Câble de chargement micro USB
Image: The JOYHILL water bottle dispenser attached to a large water bottle, with water flowing into a glass. A hand is shown pressing the power button on top of the dispenser.
Instructions d'installation
Installez le tuyau de sortie : Insert the stainless steel outlet pipe into the designated hole on the top of the pump unit. Ensure it is firmly in place.
Image: A person's hands installing the curved stainless steel spout into the main pump unit.
Attach the Silicone Hose: Connect the food-grade silicone hose to the bottom inlet of the pump unit. Make sure it is securely attached to prevent leaks.
Image: A person's hands attaching the clear silicone hose to the underside of the pump unit.
Placer sur la bouteille d'eau : Insert the silicone hose into your 3 or 5-gallon water bottle. Place the pump unit securely on top of the bottle's neck. Ensure the pump fits snugly over the bottle opening (suitable for 2.16-inch / 5.5 cm neck diameter). For 5-gallon bottles, preparing a bottle cap can help ensure stability.
Image: A person placing the assembled water pump onto the neck of a large water bottle.
Mode d'emploi
Marche/Arrêt : Press the power button on the top of the dispenser to start or stop water flow. The pump features a one-switch operation for ease of use.
Image: A hand pressing the illuminated button on top of the water dispenser, indicating operation.
Arrêt automatique: The pump will automatically stop pumping water after 60 seconds to prevent wastage. This feature ensures efficient water dispensing.
Chargement : When the battery is low, connect the supplied micro USB cable to the charging port on the pump and to a standard USB power adapter (not included). A red light indicates charging, and the light will turn off when fully charged. Avoid using fast chargers to prevent damage.
Image: An illustration showing the pump's 1200mAh battery, USB charging port, and indicator lights for working (blue), charging (red), and full charge (light off).
Vidéo de démonstration du produit :
Video: A demonstration of the JOYHILL water dispenser in use, showing how it dispenses water from a large bottle into a cup. This video highlights the ease of operation and water flow.
Entretien
To ensure the longevity and hygiene of your water dispenser, follow these maintenance tips:
- Nettoyage: Regularly clean the stainless steel spout and silicone hose with warm, soapy water. Rinse thoroughly.
- Avoid Frequent Plugging/Unplugging: To prevent leakage, avoid frequently plugging and unplugging the stainless steel pipe from the pump unit.
- Entretien de charge : Always use the provided micro USB cable for charging. Do not use fast charger heads, as this can damage the charging port.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| No water dispensed / Weak flow | Low battery; Silicone hose kinked or blocked; Pump not securely attached to bottle. | Charge the pump; Check and straighten the hose; Re-secure the pump on the bottle. |
| Fuite | Improper installation of spout or hose; Damaged silicone seal. | Ensure all connections (spout, hose) are tight and properly seated. If the issue persists, check the food-grade silicone seal inside the spout connection point. Reassemble the seal if it's dislodged.  Image: Step 1 of leak troubleshooting, showing how to grasp and remove the stainless steel pipe.  Image: Step 2 of leak troubleshooting, showing the separated food-grade silicone and ABS components.  Image: Step 3 of leak troubleshooting, demonstrating how to separate the food-grade silica gel from the ABS part.  Image: Step 4 of leak troubleshooting, showing the reassembly of the food-grade adhesive into the ABS and resetting the waterproof sleeve. |
| Pump not charging | Faulty cable; Incompatible charger; Charging port damage. | Try a different micro USB cable; Ensure charger output is compatible (1.2A to 2A recommended); Contact support if port is damaged. |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Marque | JOIE |
| Numéro de modèle | 012 |
| Couleur | Noir |
| Matériel | Acier inoxydable, Acrylonitrile Butadiène Styrène (ABS) |
| Compatibilité des capacités | 3 & 5 Gallon Water Bottles (2.16-inch / 5.5 cm neck diameter) |
| Dimensions du produit | 2.9"P x 2.9"L x 5.1"H |
| Poids | 8.5 onces |
| Quoitage | 4 watts |
| Source d'énergie | Battery Powered, Corded Electric (via Micro USB) |
| Batterie | 1 batterie lithium-ion requise (1200 mAh intégrée) |
| Arrêt automatique | Oui (après 60 secondes) |
Garantie et assistance
For any installation or quality issues within 120 days of purchase, please inform us. We are committed to providing satisfactory solutions.
For further assistance, please visit the official JOYHILL Store on Amazon: JOYHILL Amazon Store.
Vous pouvez également vous référer au guide de l'utilisateur officiel (PDF) pour obtenir des informations plus détaillées : Guide de l'utilisateur (PDF).
