1. Introduction
Thank you for choosing the lightmaXX Vega 3-Way PRO Beam/WASH/FX Moving Head Scanner. This versatile lighting fixture is designed for professional stage, event, and club applications, offering dynamic beam, wash, and special effect capabilities. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
2. Consignes de sécurité
Please read and understand all safety instructions before installing or operating this device. Failure to comply with these instructions may result in electric shock, fire, or personal injury.
- Cet appareil est destiné à un usage professionnel uniquement.
- Assurer l'alimentation voltage correspond au voltage spécifié sur l'appareil.
- Connectez toujours l'appareil à une prise de courant mise à la terre.
- Disconnect from mains power before any service, cleaning, or maintenance.
- N’utilisez pas l’appareil si le cordon d’alimentation est endommagé.
- Évitez l'exposition directe des yeux à la source lumineuse.
- Ensure adequate ventilation around the unit to prevent overheating. Maintain a minimum distance of 0.5 meters from flammable materials.
- Fixez l'appareil en toute sécurité à l'aide d'un collier de serrage approprié.amps et câbles de sécurité.
- N’ouvrez pas le boîtier ; il ne contient aucune pièce réparable par l’utilisateur. Confiez toute réparation à un personnel qualifié.
- Protégez l'appareil de la pluie, de l'humidité et des températures extrêmes.
3. Produit terminéview
The lightmaXX Vega 3-Way PRO is a hybrid moving head fixture designed to deliver powerful and versatile lighting effects. It combines beam, wash, and special effect functionalities in one compact unit.
Figure 3.1 : Face avant view of the lightmaXX Vega 3-Way PRO, displaying red light output.
Figure 3.2 : Face avant view of the lightmaXX Vega 3-Way PRO with lights off, showing the lens array.
3.1 Panneau de commande et connexions
The rear of the unit features the control panel and various input/output connections for power and DMX control.
Figure 3.3: Close-up of the control panel and connection ports.
Figure 3.4 : Arrière view of the lightmaXX Vega 3-Way PRO, showing DMX In/Out, Power In/Out, and fuse.
- ENTRÉE/SORTIE DMX : 3-pin XLR connectors for DMX signal input and output.
- ENTRÉE/SORTIE D'ALIMENTATION : PowerCon compatible connectors for mains power input and daisy-chaining power to other units.
- FUSIBLE: Fuse holder for circuit protection.
- Interrupteur marche / arrêt: Interrupteur d'alimentation principal de l'unité.
- Afficher: Écran LCD pour la navigation dans les menus et les paramètres.
- Boutons de contrôle : UP, DOWN, ESC, ENTER for navigating the menu and adjusting settings.
- DMX/Run Indicators: LEDs indicating DMX signal presence and auto-run mode.
4. Installation
4.1 Montage
The lightmaXX Vega 3-Way PRO can be mounted in various orientations (floor, truss, wall) using appropriate mounting hardware (not included). Always ensure the mounting surface or truss is capable of supporting the weight of the fixture and any additional equipment.
- Use a safety cable (not included) attached to the designated safety point on the fixture to prevent accidental drops.
- Ensure the fixture is securely fastened and balanced.
- Allow sufficient space around the fixture for ventilation and movement.
4.2 Connexion d'alimentation
Connect the provided power cable to the POWER IN connector on the fixture and then to a suitable grounded power outlet. The unit supports daisy-chaining power to other fixtures using the POWER OUT connector, but ensure the total current draw does not exceed the circuit breaker's rating.
4.3 Connexion DMX
To control the fixture via DMX, connect a DMX controller to the DMX IN port using a 3-pin XLR cable. If connecting multiple DMX fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the next. The last fixture in the chain should have a DMX terminator connected to its DMX OUT port to prevent signal reflection.
5. Fonctionnement
5.1 Navigation dans le panneau de commande
Use the control buttons to navigate the menu and adjust settings:
- HAUT/BAS : Scroll through menu options or increase/decrease values.
- ENTRER: Sélectionnez une option ou confirmez un paramètre.
- ÉCHAP: Go back to the previous menu or cancel an action.
5.2 Réglage de l'adresse DMX
To control the fixture with a DMX controller, you must set a unique DMX start address for each unit. Refer to the DMX channel chart in your DMX controller's manual for channel assignments.
- Presse ENTRER pour accéder au menu principal.
- Navigate to the 'DMX Address' or 'Address Set' option using HAUT/BAS.
- Presse ENTRER pour sélectionner.
- Utiliser HAUT/BAS to set the desired DMX start address.
- Presse ENTRER to confirm and save the address.
Modes de fonctionnement 5.3
The lightmaXX Vega 3-Way PRO typically offers several operating modes:
- Mode DMX : Full control over all functions via a DMX controller.
- Mode d'exécution automatique : Pre-programmed internal light shows that run automatically. Select 'Auto Run' from the menu and choose a program.
- Mode actif sonore : The fixture reacts to sound via its built-in microphone. Select 'Sound Active' from the menu.
- Mode maître/esclave : Link multiple units together. Set one unit as 'Master' and others as 'Slave'. The slave units will mirror the master's actions.
6. Entretien
Regular maintenance ensures the longevity and optimal performance of your lightmaXX Vega 3-Way PRO.
- Nettoyage: Periodically clean the lenses and exterior housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the unit is powered off and cool before cleaning.
- Ventilation: Keep ventilation openings clear of dust and debris. Use compressed air to gently clear vents if necessary.
- Remplacement du fusible : If the unit does not power on, check the fuse. Disconnect power, unscrew the fuse holder, and replace with a fuse of the exact same type and rating (refer to specifications).
- Inspection: Inspectez régulièrement les câbles d'alimentation, les câbles DMX et les éléments de fixation afin de détecter tout signe d'usure ou de dommage. Remplacez immédiatement les composants endommagés.
7. Dépannage
If you encounter issues with your lightmaXX Vega 3-Way PRO, refer to the following common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| Pas de courant | No mains power; Blown fuse; Damaged power cable | Check power outlet; Replace fuse; Replace power cable |
| Pas de contrôle DMX | Adresse DMX incorrecte ; câble DMX défectueux ; absence de signal DMX ; terminateur manquant | Verify DMX address; Check/replace DMX cables; Ensure DMX controller is active; Add DMX terminator to last fixture |
| Fixture not moving/responding | DMX issue; Internal error; Motor blockage | Check DMX connection/address; Power cycle the unit; Ensure no physical obstructions |
| Surchauffe | Ventilation obstruée ; débit d'air insuffisant | Clear vents; Ensure proper spacing for airflow |
If the problem persists after attempting these solutions, please contact lightmaXX customer support or your authorized dealer.
8. Spécifications
| Fonctionnalité | Spécification |
|---|---|
| Modèle | Vega 3-Way PRO Beam/WASH/FX |
| Référence constructeur | LIG0014819-000 |
| Consommation d'énergie | 240 watts |
| Dimensions (L x l x H) | 43.5 x 36.5 x 33 cm |
| Poids | 11.1 kilogrammes |
| Connectivité | DMX (3-pin XLR), PowerCon compatible (In/Out), USB (for service/firmware) |
| Technologie de capteur optique | CMOS |
| Résolution | 600 (units not specified, likely for internal sensor) |
9. Garantie et assistance
For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your authorized lightmaXX dealer. If you require technical assistance or have questions not covered in this manual, please contact lightmaXX customer support or your retailer for further guidance.
