QSC CP8 8-Inch Compact Powered Loudspeaker Instruction Manual

1. Introduction

The QSC CP8 8-Inch Compact Powered Loudspeaker is designed for high performance, superior quality, and lasting reliability. This ultra-compact and highly portable loudspeaker features a 1000-Watt peak power Class-D amplifier module, matching transducers, and advanced DSP for exceptional sound quality. It is suitable for various applications including main PA, stage monitor, or instrument amplification.

2. Principales caractéristiques

• Compact and powerful performance; Light weight and highly portable.
• 1000 Watt peak power Class-D ampmodule de lification.
• Easily selected contours for commonly-used applications.
• Advanced DSP with Intrinsic Correction for superior sound quality and speaker protection.
• Directivity Matched Transition (DMT) for consistent frequency response across the entire coverage area.
• Professional appearance looks great in any application.
• Use for main PA, stage monitor, or instrument amplifier with the option to elevate the speaker via the 35 mm pole socket.

3. Installation

Before operating your QSC CP8 loudspeaker, ensure it is placed on a stable surface or mounted securely. The speaker can be used in various orientations: floor standing, as a stage monitor, or mounted on a speaker pole.

Figure 1 : Face avant view of the QSC CP8 loudspeaker, showcasing son design compact et sa grille de protection.

Figure 2: Rear panel of the QSC CP8 loudspeaker, detailing the input/output connections, gain controls, and DSP contour settings.

3.1 Connexion de l'alimentation

1. Assurez-vous que l'interrupteur d'alimentation situé sur le panneau arrière est en position « ARRÊT ».
2. Connect the provided power cord to the AC inlet on the rear panel.
3. Branchez l'autre extrémité du cordon d'alimentation dans une prise de courant CA appropriée.

3.2 Connexions audio

1. Connect your audio source (mixer, microphone, instrument, etc.) to the 'MIC/LINE' or 'LINE' input jacks on the rear panel.
2. Use the 'MIX OUT' XLR connector to send a mixed signal to another CP8 loudspeaker or a subwoofer.

4. Mode d'emploi

4.1 Mise sous/hors tension

1. To power on, flip the power switch on the rear panel to the 'ON' position. The power LED on the front of the speaker will illuminate.
2. Pour éteindre l'appareil, basculez l'interrupteur d'alimentation sur la position « ARRÊT ».

4.2 Adjusting Volume and Gain

• Use the 'GAIN A+B' and 'GAIN C' knobs on the rear panel to adjust the input level for each channel. Start with the gain set low and gradually increase it to avoid distortion.
• The 'LIMITER' LED indicates when the internal limiter is active. Reduce the input gain if this LED is frequently lit.

4.3 DSP Contours

The CP8 features selectable DSP contours to optimize sound for different applications:

• DÉFAUT: General purpose setting.
• DANSE: Enhanced bass response for music playback.
• EXT SUB: Optimized for use with an external subwoofer.
• MONITEUR D'ÉTAGE : Reduces low-frequency build-up for stage surveillance.
• DISCOURS: Améliore la clarté vocale.

Select the appropriate contour using the switch on the rear panel.

4.4 Connectivité Bluetooth

The QSC CP8 supports Bluetooth for wireless audio streaming. Refer to the detailed instructions in the full user manual for pairing procedures with your device.

5. Entretien

• Nettoyage: Use a soft, dry cloth to clean the exterior of the loudspeaker. Avoid using abrasive cleaners or solvents.
• Stockage: Store the loudspeaker in a cool, dry place away from direct sunlight and extreme temperatures.
• Manutention: Always use the integrated handles when moving the loudspeaker. Avoid dropping or subjecting the unit to severe impacts.

6. Dépannage

• Pas de son : Check all power and audio connections. Ensure the gain controls are set appropriately and the audio source is active. Verify the correct DSP contour is selected.
• Son déformé : Reduce the input gain. If the 'LIMITER' LED is constantly lit, the input signal is too high. Check the audio source for distortion.
• Problèmes d'alimentation : Assurez-vous que le cordon d’alimentation est bien branché et que la prise de courant fonctionne.

7. Spécifications

8. Contenu de la boîte

• QSC CP8 8-Inch Compact Powered Loudspeaker
• Manuel d'utilisation
• Cordon d'alimentation

9. Garantie et assistance

The QSC CP8 8-Inch Compact Powered Loudspeaker is protected by a global 3-year warranty with product registration. For detailed warranty information, technical support, or service inquiries, please visit the official QSC website ou contactez leur service client.

Pour plus de ressources et d'informations sur les produits, veuillez consulter le site web suivant : QSC Store on Amazon.