1. Consignes de sécurité
Veuillez lire attentivement ces instructions avant l'installation et l'utilisation. Conservez ce manuel pour toute consultation ultérieure.
- Sécurité électrique : Always turn off power at the circuit breaker before beginning installation or performing any maintenance. Consult a qualified electrician if you are unsure about wiring procedures.
- Installation: Ensure the mounting surface can support the weight of the fixture. Do not install in wet locations unless explicitly rated for such environments.
- Manutention: Do not touch the LED light source directly when the fixture is on, as it may be hot.
- Compatibilité: Use only with compatible LED dimmers (e.g., Leviton, Lutron) for dimming functionality.
2. Produit terminéview
The CLOUDY BAY LED Flush Mount Ceiling Spot Light provides bright, efficient, and adjustable illumination for various indoor spaces. Its sleek design integrates seamlessly into modern interiors.
Figure 2.1 : Face avant view of the CLOUDY BAY LED Flush Mount Ceiling Spot Light.
Caractéristiques principales :
- Lumineux et efficace : 8W power, 600 lumens output, 3000K warm white light.
- Haute précision des couleurs : CRI 90+ for vivid color representation.
- Éclairage réglable : Tilt angle allows for directed light.
- Gradable : Compatible with most LED dimmers for adjustable brightness (10%-100%).
- Design élégant : Flush mount fixture for a clean aesthetic.
3. Contenu du colis
Vérifiez que tous les composants sont présents avant de commencer l'installation :
- LED Flush Mount Ceiling Spot Light Fixture
- Matériel de montage (vis, connecteurs de fils)
- Manuel d'instructions
4. Spécifications
| Attribut | Valeur |
|---|---|
| Marque | BAIE NUAGEUSE |
| Numéro de modèle | LCSLSR830WH |
| Couleur | White | 3000K |
| Matériel | Aluminium, plastique |
| Dimensions du produit | 5"L x 5"l x 4"H |
| Source d'énergie | AC |
| Voltage | 120 volts |
| Quoitage | 8 watts |
| Rendement lumineux | 600 lumens |
| Température de couleur | 3000 Kelvin (blanc chaud) |
| CRI | 90+ |
| Dossier spécial | Gradable |
| Type d'installation | Plafonnier |
| Utilisation intérieure/extérieure | Intérieur |
5. Configuration et installation
Follow these steps to install your CLOUDY BAY LED Flush Mount Ceiling Spot Light. Ensure power is OFF at the circuit breaker before starting.
- Préparer la boîte de jonction : Ensure your electrical junction box is securely mounted and accessible.
- Montez le support : Attach the mounting bracket to the junction box using the provided screws. Ensure it is firm and stable.
- Connexions filaires : Connect the fixture's wires to your household wiring using the quick connectors. Match live (black), neutral (white), and ground wires according to local electrical codes.
- Fixez le dispositif de fixation : Carefully tuck the wires into the junction box. Align the fixture with the mounting bracket and secure it with the provided screws.
- Restaurer l'alimentation : Une fois le luminaire correctement installé, rétablissez le courant au niveau du disjoncteur.
Figure 5.1: Mounting bracket installation.
Figure 5.2: Wire connection detail.
Figure 5.3: Attaching the light fixture.
Guide vidéo d'installation :
Video 5.1: Official installation guide for CLOUDY BAY Ceiling Spotlights. This video demonstrates the wiring and mounting process for the fixture.
6. Mode d'emploi
Réglage de la direction de la lumière :
The spot light features an adjustable tilt angle, allowing you to direct the light beam as needed. Gently pivot the light head to achieve the desired angle. The fixture can be rotated 360 degrees and tilted up to 180 degrees.
Figure 6.1: Illustration of the adjustable tilt and rotation capabilities.
Fonctionnalité de gradation :
This LED spot light is dimmable from 10% to 100% when used with a compatible LED dimmer switch (sold separately). Adjust the dimmer switch to achieve your preferred brightness level.
Figure 6.2: Visual representation of the dimming range.
7. Entretien
To ensure the longevity and optimal performance of your LED spot light, follow these simple maintenance guidelines:
- Nettoyage: Disconnect power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- Inspection: Periodically check for any loose connections or damage to the fixture. If any issues are found, disconnect power and consult a qualified electrician.
- Remplacement de l'ampoule : Ce luminaire utilise la technologie LED intégrée et ne nécessite aucun remplacement d'ampoule.
8. Dépannage
If you encounter issues with your CLOUDY BAY LED Flush Mount Ceiling Spot Light, refer to the following common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| La lumière ne s'allume pas | Pas de courant, câblage desserré, interrupteur défectueux | Vérifiez le disjoncteur. Assurez-vous que tous les branchements sont bien serrés. Testez l'interrupteur. |
| La lumière scintille | Variateur incompatible, câblage défectueux, fluctuations de courant | Ensure dimmer is LED compatible. Check wiring connections. Consult an electrician if power fluctuations are suspected. |
| La lumière ne diminue pas | Non-LED compatible dimmer, faulty dimmer switch | Replace with an LED-compatible dimmer switch. Test or replace the dimmer switch. |
9. Garantie et assistance
This CLOUDY BAY LED Flush Mount Ceiling Spot Light is covered by a Garantie de 3 ans à compter de la date d'achat. Cette garantie couvre les défauts de matériaux et de fabrication dans des conditions normales d'utilisation.
For warranty claims, technical support, or any questions regarding your product, please contact CLOUDY BAY customer service. Please have your model number (LCSLSR830WH) and proof of purchase available.
Coordonnées:
- Refer to your product packaging or the official CLOUDY BAY website pour les coordonnées les plus récentes.
