1. Introduction
Thank you for choosing the Artemide Tolomeo Table Lamp Micro. This manual provides essential information for the safe and efficient use of your new lamp. The Tolomeo Micro is designed with a fully adjustable, articulated anodized aluminum arm and body, featuring die-cast aluminum joints and tension control knobs for precise positioning. Its monochromatic matte finish complements various interior styles.
Veuillez lire attentivement ce manuel avant l'installation et l'utilisation, et conservez-le pour toute consultation ultérieure.
2. Consignes de sécurité
Observe the following safety precautions to prevent injury or damage to the lamp:
- Assurer l'alimentation voltage correspond au lampexigences de (120V).
- Débranchez toujours le lamp from the power outlet before cleaning, changing the bulb, or performing any maintenance.
- Ne pas dépasser la puissance maximaletage specified for the bulb (100W max). Use only E26 (medium base) A19 compatible incandescent, compact fluorescent, or LED lamps.
- Avoid touching the bulb directly after use, as it may be hot.
- N'utilisez pas le lamp avec un cordon ou une prise endommagés. En cas de dommages, contactez un technicien qualifié.
- Gardez le lamp away from water or other liquids. Do not use in damp ou des endroits humides.
- Assurez-vous que le lamp La base est placée sur une surface stable et plane pour éviter tout basculement.
- Ce lamp est conçu pour une utilisation en intérieur uniquement.
3. Contenu du colis
Vérifiez que tous les composants sont présents dans le package :
- Artemide Tolomeo Table Lamp Micro (Articulated Arm, Head, Base)
- Câble d'alimentation
- Ampoule non incluse.
4. Installation
4.1 Déballage et placement
Carefully remove all components from the packaging. Place the lamp base on a flat, stable surface. Ensure there is sufficient space for the articulated arm to extend and adjust without obstruction.
Image: Two Artemide Tolomeo Table Lamps, illustrating the adjustable arm and stable base design.
4.2 Installation de l'ampoule
- Assurez-vous que le lamp est débranché de la prise électrique.
- Gently unscrew the lamp head to access the bulb socket.
- Insert an E26 (medium base) A19 compatible bulb, ensuring it does not exceed 100W.
- Vissez le lamp head back into place securely.
Image : Gros plan du lamp head, indicating the area for bulb installation.
4.3 Connexion d'alimentation
Plug the power cable into a standard 120V electrical outlet. Ensure the cable is not pinched or routed in a way that could cause a tripping hazard.
5. Mode d'emploi
5.1 Allumer/Éteindre
The Artemide Tolomeo Table Lamp Micro features a touch switch for convenient operation. Locate the touch-sensitive area on the lamp (typically on the base or head, refer to product specifics if available). A single touch will turn the lamp allumé ou éteint.
5.2 Réglage du Lamp
Le lamp's articulated arm and head offer extensive adjustability:
- Réglage du bras : Gently move the articulated aluminum arm to position the light source as desired. The tension control knobs at the joints allow for smooth movement and stable positioning.
- Rotation de l'ombre : Le lamp head can rotate 360 degrees, allowing you to direct light precisely where needed.
Image: Artemide Tolomeo Table Lamps in an extended position, highlighting the adjustable arm functionality.
6. Entretien
6.1 Nettoyage
Débranchez toujours le lamp avant le nettoyage.
- Wipe the aluminum surfaces with a soft, dry cloth.
- Pour les taches tenaces, utilisez un tampon légèrement d.amp cloth with a mild, non-abrasive cleaner. Dry immediately.
- N’utilisez pas de produits chimiques agressifs, de nettoyants abrasifs ou de solvants, car ils peuvent endommager la finition.
6.2 Remplacement d'ampoule
Refer to section 4.2 for detailed bulb installation instructions. Ensure the lamp is unplugged and the bulb has cooled down before attempting to replace it.
6.3 Réglage de la tension
If the articulated arm feels too loose or too stiff, the tension control knobs at the joints can be adjusted. Turn them clockwise to increase tension or counter-clockwise to decrease tension, finding a comfortable balance for movement and stability.
7. Dépannage
Si vous rencontrez des problèmes avec votre lamp, se référer aux problèmes et solutions courants suivants :
| Problème | Cause possible | Solution |
|---|---|---|
| Lamp ne s'allume pas. |
|
|
| La lumière clignote. |
|
|
| Arm does not hold position. |
|
|
8. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Marque | Artemide |
| Modèle | Tolomeo Table Lamp Micro |
| Numéro de pièce | 784862011120 |
| Dimensions (Max) | 50.81"P x 30.75"L x 17.52"H |
| Poids de l'article | 3 livres |
| Matériel | Cast Aluminum, Metal |
| Type de finition | Finition mate |
| Culot de l'ampoule | E26 (Base moyenne) |
| Max Vattage | 100 watts |
| Type de source lumineuse | CFL, Incandescent, LED compatible |
| Type de commutateur | Touche |
| Dossier spécial | Adjustable Arm, 360-degree Shade Rotation |
| Source d'énergie | Électrique avec fil |
| Utilisation intérieure/extérieure | Intérieur |
9. Garantie et assistance
Artemide products are manufactured to high-quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your purchase or visit the official Artemide website.
For technical support, replacement parts, or any inquiries not covered in this manual, please contact Artemide customer service through their official channels. Contact information can typically be found on the product packaging or the manufacturer's website.
