Jensen VX3528

Jensen VX3528 DVD Receiver User Manual

Modèle : VX3528

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Jensen VX3528 DVD Receiver. Please read this manual thoroughly before using the product to ensure proper operation and to prevent damage. Keep this manual for future reference.

Informations importantes sur la sécurité

Caractéristiques principales

Configuration et installation

The Jensen VX3528 is designed for installation in vehicles with a double-DIN dash opening. Professional installation is recommended. Ensure the vehicle's battery is disconnected before beginning installation.

Connexions du panneau arrière

Refer to the diagrams below for proper connection of power, speakers, and external devices.

Arrière view of Jensen VX3528 DVD Receiver showing various input and output ports.

Figure 1 : Rear panel of the Jensen VX3528 DVD Receiver. This view highlights the RCA audio/video inputs and outputs, antenna input, and the USB input cable for charging and data.

Arrière incliné view of Jensen VX3528 DVD Receiver showing chassis and connections.

Figure 2 : Arrière incliné view of the Jensen VX3528 DVD Receiver, providing a broader perspective of the chassis and connection points, including the main wiring harness connector.

Mode d'emploi

Fonctionnement de base

Lecture de DVD/CD

  1. Insert a DVD or CD into the disc slot with the label side facing up. The unit will automatically begin playback.
  2. Use the touchscreen controls for play, pause, skip tracks/chapters, and menu navigation.
  3. To eject a disc, press the EJECT button.

Fonctionnement Bluetooth

  1. Jumelage : Enable Bluetooth on your mobile device. On the VX3528, go to the Bluetooth menu and search for available devices. Select "Jensen VX3528" from your device's list. Enter the PIN (usually "0000") if prompted.
  2. Appels mains libres : Once paired, you can make and receive calls directly through the receiver's microphone and speakers.
  3. Streaming audio: Play music from your paired device, and control playback (play/pause, skip) from the receiver's touchscreen.

USB and Auxiliary Input

Paramètres audio

Access the audio settings menu to adjust the 8-band equalizer, balance, fader, and subwoofer output for optimal sound quality.

Entretien

Dépannage

ProblèmeCause possibleSolution
Pas de courantFusible grillé ; câblage incorrect ; batterie du véhicule faible.Check vehicle fuses and the unit's fuse. Verify power wiring connections. Check vehicle battery.
Pas de sonVolume trop faible ; mode muet activé ; câblage des haut-parleurs incorrect ; ampproblème de lifier.Augmentez le volume. Vérifiez si la fonction muet est activée. Vérifiez les connexions des haut-parleurs. Assurez-vous que les haut-parleurs externes sont branchés. ampL'amplificateur (le cas échéant) est allumé.
Le disque ne se lit pas/ne s'éjecte pas.Disc inserted incorrectly; damaged disc; unit malfunction.Ensure disc is inserted correctly. Try a different, clean disc. If issue persists, consult support.
Problèmes de connexion BluetoothAppareil non jumelé ; Bluetooth désactivé sur l’appareil/l’unité ; interférences.Assurez-vous que le Bluetooth est activé sur les deux appareils. Réappairez l'appareil. Rapprochez-vous de l'unité.
L'écran tactile ne répond pasSystem frozen; calibration needed.Perform a soft reset (refer to specific reset instructions if available, otherwise power cycle). If available, recalibrate the touchscreen.

Caractéristiques

Garantie et support client

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Jensen webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.

Jensen Officiel Website: www.jensenmobile.com