1. Consignes de sécurité
- AVERTISSEMENT: Risque de choc électrique. Coupez l'alimentation au niveau du fusible ou du disjoncteur avant toute installation ou intervention.
- This fixture is designed for 120VAC power supply only. Do not attempt to connect to battery or solar power systems.
- Consultez un électricien qualifié si vous n'êtes pas familiarisé avec les installations électriques.
- Assurez-vous que tous les branchements électriques sont bien fixés et conformes aux codes et règlements locaux.
- Ce produit convient aux endroits humides.
2. Contenu du colis
- 1 x CLOUDY BAY Outdoor Wall Lantern Fixture
- 1 x Medium-base 8W LED Filament Light Bulb
- Mounting accessories (screws, wire nuts, etc.)
3. Spécifications
| Numéro de modèle | CBWL0290RBE26 |
| Vol d'entréetage | 120 V c.a. |
| Quoitage (Ampoule incluse) | LED 8W (équivalent à une ampoule incandescente de 60W) |
| Luminosité | 90 lux |
| Dimensions (H x L x P) | 13.25" x 6" x 7" (extends 7" from wall) |
| Type de finition | Bronze huilé (ORB) |
| Matériel | Alloy Steel, Seeded Glass |
| Changer de style | Cellule photoélectrique du crépuscule à l'aube |
| Type de montage | Support mural |
| Classement de l'emplacement | Emplacement humide |
| Gradable | Non |
4. Instructions d'installation
Before beginning installation, ensure the power supply is turned off at the circuit breaker. Follow these general steps for mounting your outdoor wall lantern:
- Préparez la surface de montage : Ensure the electrical box is securely installed and accessible.
- Fixer le support de montage : Secure the provided mounting bracket to the electrical box using the screws.
- Effectuer les connexions électriques : Connect the fixture's wires to your household wiring (black to black, white to white, ground to ground) using the provided wire nuts. Ensure connections are tight and insulated.
- Monter le luminaire : Carefully align the fixture with the mounting bracket and secure it with the provided screws or nuts.
- Installez l'ampoule : Screw the included 8W LED filament bulb into the fixture's socket.
- Restaurer l'alimentation : Remettez le courant au disjoncteur.
Figure 1: Product Dimensions. This diagram illustrates the height, width, and extension from the wall for the lantern.
Figure 2: Bulb Compatibility. The fixture is compatible with E26 base bulbs up to 60W Max. An 8W LED 2700K 800LM bulb is included.
5. Mode d'emploi
This CLOUDY BAY outdoor wall lantern is equipped with a dusk-to-dawn photocell sensor for automatic operation. Once installed and powered, the light will automatically turn on when ambient light levels fall (dusk) and turn off when ambient light levels rise (dawn).
- Ensure the photocell sensor (small clear dome on top of the fixture) is not obstructed by any objects, as this can interfere with its operation.
- The fixture is NOT DIMMABLENe le branchez pas à un variateur de lumière.
Figure 3: Dusk to Dawn Functionality. The integrated photocell automatically manages light operation.
Video 1: Cloudy Bay Dusk to Dawn Outdoor Wall Lantern. This video demonstrates the automatic on/off functionality of the lantern based on ambient light.
6. Entretien
- Nettoyage: To clean the fixture, turn off the power, allow it to cool, and wipe with a soft, dry or slightly damp chiffon. N'utilisez pas de nettoyants abrasifs ou de solvants.
- Remplacement de l'ampoule : The included LED bulb has a long lifespan. If replacement is needed, use an E26 medium-base bulb, not exceeding 60W incandescent equivalent. Ensure power is off before replacing the bulb.
Figure 4: Weather Resistance. The fixture is designed to withstand various outdoor weather conditions.
7. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| La lumière ne s'allume pas au crépuscule. | 1. L'alimentation est coupée. 2. Photocell is obstructed. 3. L'ampoule est défectueuse. 4. Problème de câblage. | 1. Vérifiez le disjoncteur et l'interrupteur mural. 2. Ensure photocell sensor is clear of debris or obstructions. 3. Replace bulb with a known working E26 LED bulb. 4. Verify electrical connections are secure. Consult an electrician if needed. |
| La lumière reste allumée pendant la journée. | 1. Photocell is obstructed or in a shaded area. 2. Ambient light is insufficient. | 1. Clear any obstructions from the photocell. Relocate the fixture if it's in a consistently shaded area. 2. Ensure the photocell is exposed to adequate daylight. |
| La lumière clignote. | 1. Ampoule desserrée. 2. Alimentation instable. 3. Ampoule défectueuse. | 1. Tighten the bulb securely. 2. Consult an electrician to check power supply stability. 3. Remplacez l'ampoule. |
8. Garantie et assistance
The included 8W LED filament bulb comes with a 1-year warranty from the date of purchase.
For any questions, technical assistance, or warranty claims regarding your CLOUDY BAY product, please contact CLOUDY BAY customer support. Refer to your purchase documentation for contact details.
