RICOO TS2711

RICOO TS2711 Universal Monitor Desk Mount Instruction Manual

Modèle: TS2711

1. Introduction

This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your RICOO TS2711 Universal Monitor Desk Mount. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and use are crucial for optimal performance and safety.

2. Consignes de sécurité

  • Ensure that the mounting surface (desk) can support the combined weight of the monitor arm and your monitor.
  • Ne pas dépasser la capacité de poids maximale de 8 kg (17.6 lbs).
  • Verify that your monitor's VESA mounting pattern is compatible (75x75mm or 100x100mm).
  • Utilisez toujours le matériel fourni. Si des pièces sont manquantes ou endommagées, contactez le service client.
  • Perform installation with care to prevent injury or damage to equipment. It is recommended to have assistance during monitor attachment.
  • Tenir les enfants et les animaux domestiques éloignés pendant l’installation.

3. Contenu du colis

Veuillez vérifier que tous les composants sont présents avant de commencer l'installation :

  • Assemblage du bras du moniteur
  • Bureau Clamp Base
  • Plaque VESA
  • Matériel de montage (vis, rondelles, entretoises)
  • Tools (Allen keys)
  • Manuel d'instructions
RICOO TS2711 Monitor Desk Mount components

Image 3.1 : Terminéview of the RICOO TS2711 Monitor Desk Mount components.

4. Spécifications

FonctionnalitéSpécification
Numéro de modèleTS2711
MarqueRICO
MatérielAcier allié, Plastique
Tailles d'écran compatibles13-30 pouces (33-76 cm)
Compatibilité VESA75x75mm, 100x100mm
Capacité de charge maximale8 kg (17.6 lb)
Type de mouvementArticuler
Gamme de pivot360 degrees (at arm joints)
Angle d'inclinaison+/- 45 degrés
Rotation360 degrees (for screen orientation)
Type de montageBureau Clamp
VESA compatibility and screen size range

Image 4.1: Visual representation of VESA compatibility (75x75mm, 100x100mm) and supported screen sizes (13-30 inches).

Technical drawing with dimensions and movement ranges

Image 4.2: Technical drawing illustrating the dimensions and range of motion for the TS2711 monitor arm.

5. Configuration et installation

5.1 Bureau Clamp Installation

  1. Fixez le bureau clamp base au poteau principal du bras du moniteur.
  2. Positionner le clamp on the edge of your desk. Ensure the desk thickness is between 10mm and 88mm for secure attachment.
  3. Serrez le clamp screw firmly until the arm is stable on the desk. Do not overtighten.

5.2 Fixation du moniteur

  1. Carefully lay your monitor face down on a soft, clean surface.
  2. Repérez les trous de fixation VESA à l'arrière de votre moniteur.
  3. Attach the VESA plate to the back of your monitor using the appropriate screws and washers from the hardware kit. For curved monitors or monitors with recessed VESA holes, use the provided spacers if necessary.
  4. With assistance, lift the monitor with the attached VESA plate and slide it onto the monitor arm's mounting head.
  5. Secure the monitor to the arm by tightening the locking screw on the VESA head.
Monitor arm installed on a desk with a monitor attached

Image 5.1: The RICOO TS2711 monitor arm securely installed on a desk with a monitor.

5.3 Gestion des câbles

The monitor arm features integrated cable clips to keep your workspace tidy.

  1. Route your monitor's power and video cables along the arm.
  2. Use the provided cable clips to secure the cables to the underside of the arm and along the main pole.
  3. Veillez à ce que les câbles aient suffisamment de mou pour permettre une amplitude de mouvement complète sans tension.
Cable management feature on the monitor arm

Image 5.2: Detail of the cable management system, showing how cables can be routed along the arm for a clean setup.

6. Instructions de fonctionnement (Réglages)

The RICOO TS2711 monitor arm offers various adjustment options to customize your viewexpérience de travail.

6.1 Réglage de la hauteur

To adjust the monitor height, loosen the collar on the main pole, slide the arm to the desired height, and then firmly tighten the collar to secure the position.

Monitor height adjustment mechanism

Image 6.1: Illustration of the height adjustment feature, allowing the monitor to be moved up or down along the main pole.

6.2 Swivel, Tilt, and Rotation

The arm allows for flexible positioning of your monitor:

  • Pivot: The arm joints allow for 180-degree swivel, and the VESA plate can swivel 360 degrees, enabling you to position your monitor left or right.
  • Inclinaison: The monitor can be tilted +/- 45 degrees to reduce glare and find the optimal viewangle de vue.
  • Rotation: The VESA plate supports 360-degree rotation, allowing you to switch between landscape and portrait orientations.

Adjustments can be made by gently moving the monitor to the desired position. If the monitor does not hold its position, refer to the troubleshooting section for tension adjustments.

Monitor swivel, tilt, and rotation capabilities

Image 6.2: Demonstrates the monitor's ability to swivel up to 180 degrees, tilt up to 90 degrees, and rotate 360 degrees.

7. Entretien

  • Nettoyage: Essuyez le bras du moniteur avec un chiffon doux et sec.amp Chiffon. Évitez les nettoyants abrasifs ou les solvants.
  • Contrôles périodiques : Vérifiez régulièrement le serrage et la fixation de toutes les vis et connexions. Resserrer si nécessaire.
  • Lubrification: Aucune lubrification n'est nécessaire pour les pièces mobiles.

8. Dépannage

  • L'écran s'affaisse ou ne maintient pas sa position : The tension in the arm joints may need adjustment. Use the provided Allen key to tighten the screws at the joints until the monitor holds its position firmly.
  • Mon bras est trop raide pour bouger : The tension in the arm joints may be too high. Use the provided Allen key to slightly loosen the screws at the joints until the arm moves smoothly.
  • Bureau Clamp est lâche : Assurez-vous que le bureau est clamp screw is fully tightened against the desk surface. Verify that the desk thickness is within the supported range.
  • Moniteur non nivelé : Adjust the tilt mechanism or the VESA plate rotation to level the monitor.

9. Garantie et assistance

Pour obtenir des informations sur la garantie, veuillez consulter la documentation fournie avec votre produit ou visiter le site officiel de RICOO. website. If you encounter any issues or require technical assistance, please contact RICOO customer support through their official channels or the retailer where the product was purchased.

Documents connexes - TS2711

Préview Instructions de montage du support TV mobile RICOO FS0364
Ce guide complet explique comment assembler le support TV mobile RICOO FS0364, réglable en hauteur, en inclinaison et pivotant, et doté d'une étagère. Il contient des instructions étape par étape et des consignes de sécurité pour une installation correcte.
Préview Instructions de montage et de sécurité du bras de fixation de bureau Ricoo MS061
Guide complet pour l'assemblage et l'utilisation en toute sécurité du bras de fixation de bureau Ricoo MS061. Comprend les consignes de sécurité importantes, la capacité de charge et les instructions de montage étape par étape pour une utilisation en intérieur.
Préview RICOO TS3811 Dual Monitor Desk Mount Assembly Instructions
Comprehensive assembly guide for the RICOO TS3811 dual monitor desk mount, detailing parts, safety precautions, and step-by-step installation for optimal setup.
Préview Instructions de montage du support mural pour téléviseur RICOO S5344
Instructions de montage complètes pour le support mural TV RICOO S5344, détaillant les étapes d'installation, la compatibilité VESA et les précautions de sécurité pour différents types de murs.
Préview Instructions de montage du support de plafond pour téléviseur RICOO D0122
Instructions de montage complètes pour le support de plafond TV RICOO D0122. Apprenez à installer votre téléviseur en toute sécurité, à régler la hauteur et l'orientation, et à comprendre la compatibilité VESA. Liste des pièces et consignes de sécurité incluses.
Préview Instructions de montage du support pivotant sous bureau RICOO TRH-12
Instructions de montage complètes pour le support pivotant sous bureau RICOO TRH-12, détaillant les pièces, les étapes et les précautions de sécurité pour l'installation.