Feit Electric BR40 Dimmable LED Floodlight User Manual

Introduction

Thank you for choosing the Feit Electric BR40 Dimmable LED Floodlight. This energy-efficient LED bulb is designed to replace traditional 75-watt incandescent floodlights, consuming only 11.8 watts while providing 1065 lumens of soft white 2700K light. It is suitable for various indoor applications, including track lighting and recessed fixtures, offering a wide 110-degree beam spread. With a lifespan of up to 15,000 hours, this ENERGY STAR qualified bulb is built for long-lasting performance and significant energy savings.

Image : Avant view of the Feit Electric BR40 Dimmable LED Floodlight 2-pack packaging, highlighting its LED, dimmable, flood, 1065 lumens, 11.8 watts, 15,000 life hours, and 75W replacement features.

Consignes de sécurité

AVERTISSEMENT:

• Cet appareil est conforme à la partie 15 des règles de la FCC. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas provoquer d'interférences nuisibles et (2) il doit accepter toute interférence reçue, y compris les interférences pouvant entraîner un fonctionnement indésirable.
• This equipment has been tested and found to comply with the limits for a Class B digital device. It generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications.
• Toute modification non expressément approuvée par le fabricant peut annuler le droit de l'utilisateur à utiliser l'équipement.

PRUDENCE:

• Use only on 120 volt, 60Hz circuits.
• Convient pour damp emplacements.
• Minimum operating temperature: -25°C (-13°F).
• Cet appareil n'est pas destiné à être utilisé avec des appareils d'issue de secours ou des éclairages de secours.
• Lamp may not be compatible with all dimmers. For dimmer compatibility information, visit www.feit.com or call 1-866-329-BULB.
• When installing or replacing, ensure that power is switched off at the circuit breaker before connecting or disconnecting to the fixture.

Image : Dos view of the Feit Electric BR40 Dimmable LED Floodlight packaging, showing detailed specifications, warranty information, and safety warnings.

Configuration et installation

1. Éteindre: Before beginning installation, ensure the power to the light fixture is switched off at the circuit breaker to prevent electrical shock.
2. Retirer l'ancienne ampoule : Carefully unscrew and remove the existing bulb from the fixture. Allow the old bulb to cool if it has been recently in use.
3. Installer une nouvelle ampoule LED : Screw the Feit Electric BR40 Dimmable LED Floodlight into the standard E26 medium screw base socket until it is finger-tight. Do not overtighten.
4. Restaurer l'alimentation : Once the bulb is securely installed, restore power at the circuit breaker.
5. Application: This BR40 floodlight is designed for track lighting and recessed applications, providing a wide beam of light.

Image : Côté view of the Feit Electric BR40 Dimmable LED Floodlight packaging, illustrating its wide light distribution and suitability for track and recessed applications.

Mode d'emploi

The Feit Electric BR40 LED Floodlight is designed for simple operation in compatible fixtures.

• Fonctionnement standard : Once installed and power is restored, the bulb will illuminate when the light switch is turned on.
• Fonctionnalité de gradation : This LED bulb is dimmable. For optimal performance and to avoid flickering or buzzing, use with LED-compatible dimmer switches. If you experience issues with your current dimmer, consult www.feit.com for a list of compatible dimmers or contact customer support.
• Utilisation en intérieur : This bulb is intended for indoor use in dry or damp emplacements.

Entretien

Feit Electric LED bulbs require minimal maintenance due to their long lifespan and durable design.

• Nettoyage: Assurez-vous que l'appareil est hors tension avant de le nettoyer. Essuyez l'ampoule avec un chiffon doux et sec. N'utilisez pas de nettoyants liquides ni de produits abrasifs.
• Remplacement: Replace the bulb only after it has cooled down completely.
• Élimination: Dispose of LED bulbs according to local regulations for electronic waste.

Dépannage

If you encounter issues with your Feit Electric BR40 LED Floodlight, consider the following:

• L'ampoule ne s'allume pas :
  1. Assurez-vous que l'ampoule est bien vissée dans la douille.
  2. Check if the power switch is on and the circuit breaker has not tripped.
  3. Test the bulb in a different, known-working fixture.
• Scintillement ou bourdonnement :
  1. Cela indique souvent une incompatibilité avec le variateur. Assurez-vous d'utiliser un variateur compatible avec les LED.
  2. Visite www.feit.com for a list of recommended dimmers or contact customer support.
• Radio or TV Interference:
  1. If the bulb causes interference, try reorienting or relocating the receiving antenna.
  2. Increase the separation between the light fixture and the affected receiver.
  3. Connect the light fixture to an outlet on a different circuit from the receiver.
  4. Consult a dealer or an experienced radio/TV technician for further assistance.

Caractéristiques

Garantie et assistance

Garantie: This Feit Electric LED lamp comes with a 5-year, free replacement warranty. If the product fails or you are not satisfied with its performance, please contact Feit Electric directly. This replacement is the sole remedy available, and liability for incidental or consequential damage is expressly excluded.

Coordonnées:

• Website: www.feit.com
• E-mail: info@feit.com
• Numéro sans frais : 1-866-329-BULB (1-866-329-2852)

Fabricant:
Compagnie Feit Electric
Pico Rivera, Californie 90660
Fabriqué en Chine