MEAN WELL HLG-240H-24A LED Driver Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the MEAN WELL HLG-240H-24A LED Driver. This device is a high-performance AC-to-DC switching power supply designed to provide a stable 24V output at up to 10A, suitable for various LED lighting applications requiring constant voltage and constant current operation.

2. Consignes de sécurité

Débrancher l'alimentation : Always ensure the AC input power is disconnected before any installation, wiring, or maintenance procedures to prevent electric shock.
Installation professionnelle : L'installation doit être effectuée par un électricien qualifié, conformément à toutes les normes électriques locales et nationales.
Mise à la terre appropriée : Ensure the driver is properly grounded to prevent electrical hazards.
Ventilation: Provide adequate ventilation around the driver to prevent overheating. Do not cover the unit.
Conditions environnementales : Do not expose the driver to excessive moisture, rain, or extreme temperatures outside its specified operating range. This unit is rated IP65 for suitable use in dry and wet locations, but direct submersion is not recommended.
Compatibilité de charge : Ensure the connected LED load is compatible with the driver's output voltage and current specifications. Do not exceed the maximum rated power of 240W.
Câblage : Use appropriate gauge wiring for input and output connections to handle the current without overheating.

3. Produit terminéview

The HLG-240H-24A is a robust LED driver featuring a metal casing for durability and efficient heat dissipation. It offers both constant voltage (C.V) and constant current (C.C) modes, making it versatile for various LED applications. The unit is designed for high reliability and efficiency.

MEAN WELL HLG-240H-24A LED Driver front view avec étiquettes

Figure 1 : Face avant view of the HLG-240H-24A LED Driver, showing input/output labels and specifications.

MEAN WELL HLG-240H-24A LED Driver angled view

Figure 2 : Angulaire view of the HLG-240H-24A LED Driver, highlighting the input and output cables and adjustment potentiometers.

MEAN WELL HLG-240H-24A LED Driver side view

Figure 3 : Côté view of the HLG-240H-24A LED Driver, showing the robust metal casing and mounting tabs.

4. Spécifications

Paramètre	Valeur
Marque	Ça veut dire bien
Modèle	HLG-240H-24A
Vol d'entréetaget gamme	100-240VAC (277VAC for North America only)
Volume de sortietage	+24 V CC
Courant de sortie	10A
Puissance nominale	240 W
Évaluation actuelle	10 Amps
Fréquence minimale	60 Hz
Indice de protection IP (Ingress Protection)	IP65 (Suitable for Dry and Wet Locations)
Certifications	CE, RoHS, UL
Poids de l'article	0.17 livres

5. Configuration et installation

5.1 Montage

Mount the driver in a location that allows for adequate airflow and heat dissipation.
Use the integrated mounting tabs to securely fasten the driver to a stable surface.
Avoid mounting near heat sources or in enclosed spaces without ventilation.

5.2 Connexions de câblage

Refer to Figure 1 for visual guidance on wiring terminals. Ensure all connections are secure and insulated.

AC Input (Brown, Blue, Green/Yellow):
- Connectez le Brown (ACL) wire to the Live/Phase (L) terminal of your AC power source.
- Connectez le Blue (ACN) wire to the Neutral (N) terminal of your AC power source.
- Connectez le Vert/Jaune wire to the Earth Ground (PE) terminal. This connection is crucial for safety.
DC Output (Red, Black):
- Connectez le Red (+Vo) wire to the positive (+) input of your LED load.
- Connectez le Black (-Vo) wire to the negative (-) input of your LED load.

5.3 Output Adjustments

The HLG-240H-24A features built-in potentiometers for adjusting output voltage (Vo ADJ) and output current (Io ADJ). These are typically located near the output cables (refer to Figure 2).

Vo ADJ (Voltage Adjustment): Use a small screwdriver to carefully adjust the output voltage within the specified range (e.g., 22V to 26V for a 24V model).
Io ADJ (Current Adjustment): Use a small screwdriver to carefully adjust the output current within the specified range (e.g., 5A to 10A for a 10A model).
Note: Adjustments should only be made by qualified personnel with appropriate measurement tools while the unit is powered on and under load.

6. Mode d'emploi

After completing all wiring and mounting, ensure all connections are secure and correct.
Apply AC input power to the driver. The LED load should illuminate.
The driver operates in Constant Voltage (C.V) mode when the load current is below the set constant current limit, maintaining a stable output voltage.
When the load current reaches the set constant current limit, the driver switches to Constant Current (C.C) mode, maintaining a stable output current while the output voltage peut tomber.
Monitor the LED load for proper operation. If any issues arise, refer to the Troubleshooting section.

7. Entretien

Nettoyage: Periodically inspect the driver for dust accumulation. If necessary, disconnect power and gently clean the exterior with a soft, dry cloth. Do not use liquid cleaners.
Vérifications de connexion : Annually, or as needed, inspect all wiring connections for tightness and signs of wear or corrosion. Re-tighten if necessary.
Surveillance environnementale : Ensure the operating environment remains within the specified temperature and humidity ranges to prolong the driver's lifespan.
No user-serviceable parts are inside. Do not attempt to open the casing.

8. Dépannage

Aucune puissance de sortie :
- Check if the AC input power is connected and active.
- Vérifiez que tous les branchements d'entrée et de sortie sont corrects et bien fixés.
- Ensure the LED load is properly connected and not short-circuited.
- Check for any tripped circuit breakers or blown fuses in the AC supply line.
Volume de sortie incorrecttage/Actuel :
- Verify the Vo ADJ and Io ADJ potentiometers are set correctly for your application.
- Ensure the load is within the driver's specified operating range (24V, 10A, 240W).
- Mesurer le volume de sortietage and current with a multimeter to confirm readings.
Surchauffe:
- Ensure adequate ventilation around the driver. Remove any obstructions.
- Verify the ambient temperature is within the driver's operating limits.
- Confirm the load does not exceed the driver's maximum rated power.

9. Garantie et assistance

MEAN WELL products are manufactured to high standards and are typically covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official MEAN WELL website.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact your authorized MEAN WELL distributor or reseller.

	Série MEAN WELL HLG-240H : 240 W à volume constanttagSpécifications du pilote LED e/Current Spécifications techniques détaillées, caractéristiques, applications et données de performance pour les pilotes LED 240 W de la série MEAN WELL HLG-240H. Couvre la tension constantetagmodes e et courant constant, indices de protection IP67/IP65, large plage de tension d'entréetaggamme, options de gradation et dimensions mécaniques.
	Pilote LED à courant constant MEAN WELL série HLG-240H-C 250 W La série MEAN WELL HLG-240H-C est un driver LED AC/DC à courant constant de 250 W, conçu pour les applications d'éclairage intérieur et extérieur à haut rendement. Doté d'une protection IP67/IP65, d'un PFC actif et de diverses options de gradation, notamment la gradation 3-en-1 et la gradation par minuterie intelligente, il offre une flexibilité de conception optimale pour l'éclairage public LED, les éclairages de pêche, etc.ampCette série de luminaires, conçue pour l'éclairage portuaire, architectural et de baies, fonctionne sur une tension de 90 à 305 V CA et propose des modèles de 700 mA à 2 100 mA, garantissant ainsi des performances robustes et une durée de vie typique supérieure à 62 000 heures.
	Fiche technique du driver LED 240 W MEAN WELL HLG-240H Spécifications techniques complètes, caractéristiques, applications et détails opérationnels pour la série MEAN WELL HLG-240H 240 W à volume constanttagPilote LED à courant constant et e. Indices de protection IP65/IP67, options de gradation et caractéristiques mécaniques.
	Pilote LED MEAN WELL HLG-240H-C série 250 W en mode courant constant La série MEAN WELL HLG-240H-C est un driver LED à courant constant de 250 W offrant un rendement élevé, une conception sans ventilateur et un indice de protection IP67/IP65 pour les applications intérieures et extérieures. Il fonctionne de 90 à 305 VCA, offre différentes sorties de courant et propose plusieurs options de gradation, telles que 1 à 10 VCC, PWM 10 V, résistance et minuterie intelligente.
	Série MEAN WELL HLG-120H : 120 W à volume constanttagFiche technique du pilote de LED e/Current Spécifications détaillées, caractéristiques, applications et données techniques des drivers LED AC/DC 120 W de la série MEAN WELL HLG-120H, offrant une tension constantetage and constant current output with IP65/IP67 ratings. This document provides information on model encoding, electrical and environmental specifications, dimming operations, and mechanical dimensions.
	Fiche technique et spécifications du driver LED 120 W MEAN WELL HLG-120H Spécifications techniques complètes, fonctionnalités, applications, options de gradation, données de performance et détails mécaniques pour la série MEAN WELL HLG-120H 120W Constant VoltagDriver LED e+ à courant constant. Convient à diverses applications d'éclairage LED avec indice de protection IP67/IP65.