1. Plus deview
The NZXT H200 is a compact Mini-ITX PC gaming case designed for enthusiasts seeking a small form factor build without compromising on features or aesthetics. It features an all-steel construction, a tempered glass side panel, and an integrated cable management system for a clean and organized build. The case supports water cooling configurations and includes two pre-installed Aer F fans for optimal airflow.
Figure 1 : Face avant view of the NZXT H200 Mini-ITX PC Gaming Case.
2. Configuration et installation
This section guides you through the process of setting up your NZXT H200 case and installing your PC components.
2.1 Ouverture du boîtier
To access the interior, first remove the tempered glass side panel by unscrewing the captive thumb screws. For the rear panel, locate the small push-button mechanism on the back of the case, above the I/O shield area. Pressing this button will release the rear panel, allowing access to the cable management area and accessory box. Handle panels carefully to avoid damage.
Figure 2 : Arrière view of the NZXT H200 case, highlighting the panel release mechanism.
2.2 Installation de la carte mère
- Ensure the I/O shield (if not integrated with your motherboard) is installed into the case's rear opening.
- Align your Mini-ITX motherboard with the standoffs inside the case.
- Fixez la carte mère à l'aide des vis fournies dans la boîte d'accessoires.
2.3 Installation de l'alimentation électrique
The NZXT H200 supports a bottom-mount power supply. Slide your power supply into the designated compartment at the bottom rear of the case and secure it with screws from the exterior rear panel.
2.4 Installation du lecteur
The case provides multiple mounting points for 2.5-inch SSDs and 3.5-inch HDDs. Utilize the removable drive trays and cages located behind the motherboard tray and on the PSU shroud. Secure drives with the appropriate screws.
2.5 Gestion des câbles
Utilize the integrated cable management bar and routing channels behind the motherboard tray. Velcro straps are provided to secure cables, ensuring a clean interior and optimal airflow.
Figure 3 : Interne view montrerasing the cable management system.
2.6 Système de refroidissement
The H200 comes with two pre-installed Aer F fans. Additional fan and radiator mounting points are available for enhanced air or liquid cooling configurations. Ensure proper fan direction for optimal airflow.
Figure 4: Internal layout of the NZXT H200, showing fan placement and component areas.
3. Utilisation de votre boîtier PC
Once all components are installed and secured, and all necessary cables are connected, you can close the case panels. Connect your peripherals, monitor, and power cable to your PC. Use the power button on the top panel to turn on your system. The case is designed to provide efficient airflow for your components, contributing to stable system operation.
4. Entretien
Un entretien régulier contribue à garantir des performances optimales et une longue durée de vie aux composants de votre PC.
4.1 Nettoyage du filtre à poussière
The NZXT H200 includes removable dust filters. Periodically remove and clean these filters to prevent dust buildup inside the case, which can impede airflow and cooling efficiency. Use compressed air or a soft brush to remove dust.
4.2 Entretien des panneaux en verre trempé
Nettoyez la vitre en verre trempé avec un chiffon doux non pelucheux et un nettoyant pour vitres non abrasif. Évitez les produits chimiques agressifs et les matériaux abrasifs qui pourraient rayer le verre.
4.3 General Case Cleaning
Essuyez l'extérieur de la coque avec un chiffon doux et sec.amp cloth. Ensure the case is powered off and unplugged before cleaning.
5. Dépannage
Cette section aborde les problèmes courants que vous pourriez rencontrer.
5.1 Difficulty Opening Rear Panel / Finding Accessories
As noted in the setup section, the rear panel is released by a small push-button on the back of the case. The accessory box and manual are typically located within a 3.5-inch HDD enclosure in the lower chamber, accessible once the rear panel is open.
5.2 Cable Routing Challenges
If you encounter difficulties with cable routing, ensure you are utilizing the dedicated cable management channels and Velcro straps. The main 24-pin ATX motherboard connector might require careful routing around the central cable management bar.
5.3 Insufficient Airflow or High Temperatures
Verify that all fans are correctly installed and oriented to create an effective airflow path (intake and exhaust). Ensure dust filters are clean and not obstructed. Check that no internal cables are blocking airflow.
Pour obtenir de l'aide supplémentaire, veuillez consulter le support NZXT. website ou contactez leur service client.
6. Spécifications
| Fonctionnalité | Spécification |
|---|---|
| Marque | NZXT |
| Nom du modèle | NZXT H200 |
| Compatibilité de la carte mère | Mini ITX |
| Type de cas | Bureau |
| Matériel | Acier allié, verre trempé |
| Méthode de refroidissement | Air, eau |
| Nombre de fans | 2 (pré-installé) |
| Poids de l'article | 13.2 livres |
| Nombre total de ports USB | 2 2.0 (USB XNUMX) |
| Internal Bays Quantity | 3 (for 3.5-inch and 2.5-inch drives) |
| Type de montage de l'alimentation | Montage par le bas |
7. Garantie et assistance
7.1 Informations sur la garantie
The NZXT H200 PC Gaming Case comes with a Garantie de 2 ans À compter de la date d'achat. Cette garantie couvre les défauts de matériaux et de fabrication dans des conditions normales d'utilisation. Veuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.
7.2 Assistance clientèle
For technical support, troubleshooting assistance, or warranty inquiries, please visit the official NZXT website à www.nzxt.com/support. You can find FAQs, driver downloads, and contact information for their support team.
