Focusrite Clarett 8Pre USB Audio Interface User Manual

Introduction

The Focusrite Clarett 8Pre USB is a high-performance 18-in/20-out audio interface designed for professional recording environments. It features specially engineered low-noise mic preamps, high-quality 24-bit/192kHz A-D and D-A conversion, and versatile connectivity options for both Mac and PC systems. This manual provides essential information for setting up, operating, and maintaining your Clarett 8Pre USB interface.

Caractéristiques principales

• Eight Air-enabled Mic Preamps: Features specially designed, ultra-low noise mic preamps with an 'Air' mode that emulates the sound of Focusrite's classic ISA transformer-based preamps.
• High-Quality Conversion: Precision 24-bit/192kHz A-D and D-A conversion ensures a superior signal path with 118dB dynamic range.
• Entrées polyvalentes : Includes eight mic/line inputs, with two also functioning as high-impedance instrument inputs for direct recording of guitars and basses without unwanted distortion.
• Extensive Outputs: Ten 1/4-inch balanced jack outputs, including a dedicated stereo pair, and two independent headphone outputs with individual volume controls.
• Connectivité numérique : MIDI I/O, S/PDIF I/O, and ADAT I/O for expanding your setup with up to eight additional inputs and outputs.
• Faible latence : Achieves super-low round-trip latency for real-time monitoring and recording through amp simulators and effects plug-ins.
• Compatibilité multiplateforme : Connects to Mac or PC using included standard USB and USB Type-C cables.
• Focusrite Control Software: User-friendly software for configuring routing and monitor mixes from Mac, PC, iPad, iPhone, or iPod Touch.
• Suite logicielle incluse : Comes with Ableton Live Lite, Brainworx bx_console Focusrite, Softube Time and Tone Bundle, Focusrite’s Red Plug-in Suite, a choice of one free XLN Addictive Keys virtual instrument, and Loopmasters content.

Guide d'installation

Déballage et inspection initiale

Upon opening the package, verify that all components are present and undamaged. The box should contain the Clarett 8Pre USB interface, a power supply, a standard USB cable, and a USB Type-C cable. Refer to the image below for typical box contents.

Figure 1: Clarett 8Pre USB Box Contents. This image displays the Clarett 8Pre USB interface, its power cable, and both standard USB and USB Type-C cables, along with the included documentation.

Connexion à votre ordinateur

1. Connexion électrique : Connect the included power supply to the Clarett 8Pre USB and plug it into a suitable power outlet.
2. Connexion USB : Use either the standard USB cable or the USB Type-C cable to connect the Clarett 8Pre USB to an available USB port on your Mac or PC.
3. Installation du logiciel : Visit the Focusrite website to download and install the latest drivers and the Focusrite Control software for your operating system. This software is crucial for managing the interface's settings, routing, and monitoring mixes.

Figure 2 : Panneau avantview. This image shows the front panel of the Clarett 8Pre USB, highlighting the input jacks, gain knobs, and metering display.

Figure 3: Rear Panel Connectivity. This image provides a detailed view of the rear panel, illustrating the various analog and digital input/output ports, including MIDI, S/PDIF, and ADAT connections.

Mode d'emploi

Connexions d'entrée

The Clarett 8Pre USB offers a variety of input options:

• Entrées micro/ligne (1-8) : Connect microphones via XLR or line-level instruments/devices via 1/4-inch TRS cables.
• Entrées des instruments (1-2) : Inputs 1 and 2 can also be used for high-impedance instruments like guitars and basses. Ensure the 'INST' button is engaged for these inputs.
• Alimentation fantôme 48 V : For condenser microphones, activate 48V phantom power using the dedicated buttons. Phantom power can be applied to inputs 1-4 and/or 5-8.
• 'Air' Mode: Engage the 'Air' button for inputs to activate an analog model of Focusrite's transformer-based ISA mic preamps, adding clarity and presence to your recordings.

Connexions de sortie

The interface provides flexible output routing:

• Line Outputs (1-10): Connect to studio monitors, external effects processors, or other line-level devices. Outputs 1-2 are typically used for main monitor outputs and feature anti-thump technology.
• Headphone Outputs (1-2): Two independent headphone outputs with dedicated volume controls allow for separate monitoring mixes for performers and engineers.
• Sorties numériques: S/PDIF and ADAT outputs allow for digital signal transfer to compatible devices, expanding your input/output capabilities.
• Sortie Word Clock : Ensures precise synchronization with other digital audio equipment in your studio.

Using Focusrite Control Software

Focusrite Control is the companion software for your Clarett 8Pre USB, providing comprehensive control over routing, monitoring, and hardware settings. It allows you to:

• Create custom monitor mixes for artists and engineers.
• Adjust input gain and phantom power settings.
• Configure digital I/O settings (S/PDIF, ADAT).
• Manage latency settings for optimal performance.

For detailed instructions on using Focusrite Control, refer to the software's built-in help documentation or the Focusrite support website.

Produit terminéview Vidéo

Visionnez cette vidéo officielle du produit pour une présentation complète.view of the Focusrite Clarett 8Pre USB's features and connectivity options.

Entretien

• Nettoyage: Utilisez un chiffon doux et sec pour nettoyer l'extérieur de l'appareil. Évitez les nettoyants abrasifs et les solvants.
• Ventilation: Assurez une ventilation adéquate autour de l'appareil afin d'éviter toute surchauffe. Ne bloquez pas les ouvertures de ventilation.
• Mises à jour du micrologiciel : Regularly check the Focusrite webSite de mise à jour du micrologiciel pour garantir des performances et une compatibilité optimales.
• Gestion des câbles: Organize cables to prevent strain on connectors and accidental disconnections.

Dépannage

Problèmes courants et solutions

• Pas d'alimentation :
  • Ensure the power cable is securely connected to both the interface and a working power outlet.
  • Vérifiez que l'interrupteur d'alimentation situé sur le panneau avant est en position « ON ».
• Aucun son/signal d'entrée :
  • Verify that the USB cable is securely connected to both the interface and your computer.
  • Check input gain knobs are turned up sufficiently.
  • Ensure correct input selection (Mic/Line/Inst) in Focusrite Control.
  • Confirm phantom power (48V) is enabled for condenser microphones.
  • Check your DAW's input/output settings to ensure the Clarett 8Pre USB is selected as the audio device.
• Crackling/Distortion:
  • Reduce input gain to prevent clipping (indicated by red lights on the meters).
  • Increase buffer size in your DAW's audio settings to reduce CPU strain.
  • Ensure your computer meets the minimum system requirements for the interface and your DAW.
• Problèmes de latence :
  • Decrease buffer size in your DAW's audio settings.
  • Utilize the direct monitoring features within Focusrite Control to monitor inputs with zero-latency.

For further assistance, visit the Focusrite Help Centre or contact Focusrite Support.

Spécifications techniques

Garantie et assistance

The Focusrite Clarett 8Pre USB is protected by a Garantie de deux ansCette garantie couvre les défauts de fabrication et assure que votre produit fonctionne comme prévu.

For technical assistance, product registration, or to access the latest drivers and software, please visit the official Focusrite support website:

Assistance Focusrite Website

Focusrite also offers best-in-class technical support to assist you with any queries or issues you may encounter.