Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor

1. Introduction

Thank you for choosing the Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

2. Consignes de sécurité

• Sécurité électrique : Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Always disconnect power at the main circuit breaker before attempting any installation, maintenance, or bulb replacement.
• Utilisation en extérieur : This fixture is rated IP44, meaning it is protected against solid objects larger than 1mm and against splashing water from any direction. It is designed for outdoor use only.
• Type d'ampoule : Use only R7s halogen bulbs with a maximum wattage de 150 W. Dépassement de la puissance maximaletagcela peut provoquer une surchauffe et endommager le dispositif ou créer un risque d'incendie.
• Manutention: Do not touch the halogen bulb with bare hands during installation or replacement, as oils from your skin can cause premature failure. Use a clean cloth or gloves.
• Montage: Assurez-vous que la surface de montage est structurellement saine et peut supporter le poids du dispositif.

3. Contenu du colis

Veuillez vérifier que tous les composants sont présents et non endommagés :

• Brilliant Tanko 96162/06 Outdoor Wall Light Unit with Motion Sensor
• Matériel de montage (vis, chevilles)
• Manuel d'instructions (ce document)

Note: R7s bulb is typically not included and must be purchased separately.

4. Configuration et installation

Avant de commencer : Assurez-vous que l'alimentation électrique de la zone d'installation est coupée au niveau du disjoncteur principal.

1. Préparez la surface de montage : Choose a suitable wall location for the fixture. Mark the drilling points for the mounting bracket.
2. Montez le support : Drill holes at the marked points and insert the wall plugs. Secure the mounting bracket to the wall using the provided screws.
3. Câblage : Connect the electrical supply wires to the terminal block inside the fixture. Ensure correct polarity (Live, Neutral, Earth) according to local wiring regulations. Secure all connections tightly.
4. Installez l'ampoule : Carefully insert an R7s halogen bulb (max 150W) into the bulb holder. Avoid touching the glass part of the bulb with bare hands.
5. Fixez le dispositif de fixation : Secure the main light unit to the mounted bracket. Ensure it is firmly attached and sealed against the wall to maintain its IP44 rating.
6. Adjust Sensor and Light Head: The motion sensor and light head are adjustable. Position them to cover the desired detection area and illumination direction.

Figure 4.1: Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor. This image shows the complete fixture, including the main light housing and the adjustable motion sensor unit mounted below it.

Figure 4.2 : Gros plan view of the R7s bulb socket within the Brilliant Tanko fixture. This illustrates where the R7s halogen bulb should be inserted.

5. Mode d'emploi

Once installed and power is restored, the Brilliant Tanko 96162/06 will operate as follows:

• Détection de mouvement : The integrated motion sensor detects movement within its adjustable range. When motion is detected, the light will automatically turn on.
• Durée d'éclairage : The light will remain on for a set period after motion is detected. This duration is typically adjustable via controls on the sensor unit (refer to specific markings on your sensor for adjustment dials for 'TIME' and 'LUX' settings, if present).
• Ambient Light Sensor (LUX): The sensor also includes an ambient light sensor. This prevents the light from activating during daylight hours, saving energy. The sensitivity of this sensor can often be adjusted to determine at what level of darkness the motion sensor becomes active.

6. Entretien

• Nettoyage: Pour nettoyer le luminaire, assurez-vous qu'il est hors tension. Essuyez-le avec un chiffon doux et sec.amp Chiffon. N’utilisez pas de nettoyants abrasifs ni de solvants, car ils pourraient endommager la finition ou le capteur.
• Remplacement de l'ampoule : Always disconnect power before replacing the bulb. Allow the old bulb to cool completely. Carefully remove the old R7s bulb and insert a new R7s bulb (max 150W), avoiding direct contact with the glass.
• Inspection: Inspectez régulièrement le luminaire afin de détecter tout signe de dommage, de connexion desserrée ou d'usure. En cas de problème, coupez l'alimentation et consultez un électricien qualifié.

7. Dépannage

8. Spécifications

Figure 8.1: Energy label for the Brilliant Tanko 96162/06, indicating compatibility with bulbs from energy classes A++ to E.

9. Garantie et assistance

Information regarding specific warranty terms and spare parts availability for the Brilliant Tanko 96162/06 is not provided in the product data. For warranty claims, technical support, or inquiries about spare parts, please contact the retailer where you purchased the product or the manufacturer directly. Always have your proof of purchase and model number (96162/06) available when contacting support.