Blackvue DR750S-2CH

Manuel d'utilisation de la caméra embarquée double canal BlackVue DR750S-2CH

Brand: BlackVue | Model: DR750S-2CH

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your BlackVue DR750S-2CH dual channel dashcam. The DR750S-2CH is a high-performance car DVR recorder featuring Full HD 1080p recording for both front and rear cameras, built-in Wi-Fi, Cloud connectivity, G-Sensor, and GPS. It supports up to 128GB microSD cards for reliable loop recording and intelligent parking mode surveillance.

2. Produit terminéview

Caractéristiques principales :

Composants:

The BlackVue DR750S-2CH package includes the main front camera unit, a rear camera, a 16GB microSD card, and necessary cables for installation and power. Additional components may include mounting accessories and a pry tool for cable management.

BlackVue DR750S-2CH Front and Rear Dashcam

Figure 1 : BlackVue DR750S-2CH Front and Rear Dashcam units. The front camera is a cylindrical unit with a lens, while the smaller rear camera is also cylindrical and connects to the front unit.

3. Installation

3.1. Préparations initiales

  1. Insérer la carte MicroSD : Locate the microSD card slot on the main front camera unit. Gently insert the provided 16GB microSD card until it clicks into place.
  2. Retirer les films protecteurs : Carefully remove any protective films from the front and rear camera lenses.

3.2. Installation de la caméra frontale

  1. Choisissez l'emplacement de montage : Select a flat, clear area on your front windshield, typically behind the rearview miroir, en veillant à ce qu'il ne vous gêne pas. view.
  2. Pare-brise propre : Thoroughly clean the chosen area on the windshield to ensure proper adhesion.
  3. Apply Electrostatic Sticker (Optional but Recommended): If provided, apply an electrostatic sticker to the cleaned area. This helps with easier removal and repositioning of the dashcam mount. Press outwards from the center to remove air bubbles.
  4. Attach Mount Bracket: Slide the mount bracket onto the front camera unit. Remove the adhesive backing from the mount bracket.
  5. Caméra frontale à installer : Align the dashcam with the electrostatic sticker (if used) or directly onto the cleaned windshield. Press firmly and hold for several seconds to ensure a secure bond.

3.3. Connexion électrique

  1. Connectez le câble d'alimentation : Plug the mini USB connector of the power cable into the dashcam's power socket.
  2. Cheminement du câble d'alimentation : Neatly route the power cable along the windshield edge and down the A-pillar to your vehicle's power outlet. Ensure the cable does not interfere with airbag deployment. If unsure, consult a professional.
  3. Connectez-vous à une prise de courant :
    • Port USB-A : If your vehicle has a USB-A port (5V, 2A or higher recommended), plug the USB end of the power cable directly into it.
    • Prise allume-cigare : If using the cigarette lighter socket, insert the USB end of the power cable into the supplied car charger adapter, then plug the adapter into your vehicle's cigarette lighter outlet.
  4. Puissance d'essai : Activate your vehicle's ignition. The dashcam should power on.
  5. Formater la carte MicroSD : If prompted on the dashcam screen, format the microSD card by pressing the designated button (refer to on-screen instructions or the quick start guide).

3.4. Installation de la caméra arrière

  1. Choisissez l'emplacement de montage : Select a flat, clear area at the top center of your rear windshield.
  2. Pare-brise propre : Nettoyez soigneusement la zone choisie.
  3. Apply Electrostatic Sticker (Optional): Apply an electrostatic sticker to the cleaned area, ensuring it does not cover the lens area. Press outwards from the center to remove air bubbles.
  4. Retirer les films protecteurs : Remove the protective film from the rear camera lens and the adhesive cover from its mount.
  5. Caméra arrière de montage : Align the rear camera so the "BlackVue" logo is oriented upright when viewed from inside your vehicle. Secure the mount bracket in this position, then firmly attach the rear camera onto the electrostatic sticker (if used) or directly onto the cleaned windshield.
  6. Connecter le câble de la caméra arrière : Run the rear camera cable from the front camera along the headliner and through the C-pillar or side trim for a clean, concealed look. Plug the cable securely into the rear camera port on the front unit.
  7. Adjust Rear Camera Angle: Switch your front camera's display to rear view mode. Tilt the rear camera up or down until it captures a clear, straight view derrière votre véhicule.

3.5. BlackVue App Connection

To unlock the full potential of your BlackVue DR750S-2CH, download the BlackVue App from your device's app store (iOS/Android). Follow the in-app instructions to connect your smartphone to the dashcam's Wi-Fi hotspot. The default password is 12345678. Ensure any VPN is disabled before connecting.

Vidéo 1: Unboxing and initial setup of a BlackVue DR series dashcam, demonstrating component identification and basic preparation steps.

4. Mode d'emploi

4.1. Fonctionnement de base

4.2. Mode de stationnement

The intelligent parking mode provides surveillance when your vehicle is parked. It utilizes impact detection and motion detection to record events. The dashcam consumes low power in parking mode to extend surveillance time.

Vidéo 2: A short demonstration of BlackVue's parking mode protection features, highlighting low current draw and pre-impact recording.

4.3. Wi-Fi and Cloud Features

Vidéo 3: Demonstration of HDR clarity in a BlackVue dashcam, showcasing improved video quality in challenging lighting conditions.

5. Entretien

6. Dépannage

Vidéo 4: A short video demonstrating the temperature detection system in a BlackVue dashcam, showing its operational range in varying climates.

7. Spécifications

FonctionnalitéDétail
Nom du modèleDR750S-2CH
Chaînes d'enregistrement2 (Avant et Arrière)
Résolution de la caméra frontaleFull HD 1080p @ 60fps
Résolution de la caméra arrièreFull HD 1080p @ 30fps
Capteur d'imagesCapteur CMOS SONY STARVIS
Viewing Angle (Front)Diagonale 139°, horizontale 116°, verticale 61°
Viewing Angle (Rear)Diagonale 139°, horizontale 116°, verticale 61°
WifiBuilt-in (802.11n (2.4 – 2.4835 GHz))
GPSIntégré
Capteur GIntégré
Prise en charge des cartes microSDJusqu'à 128 Go (16 Go inclus)
Température de fonctionnement-20°C à 70°C (-4°F à 158°F)
High Temperature Cut-offEnviron 80 °C (176 °F)
Dimensions du produit4.53 x 1.38 x 1.38 pouces
Poids de l'article11.2 onces
CouleurNoir

8. Garantie et assistance

For warranty information, detailed support, and additional resources, please visit the official BlackVue website or contact BlackVue customer support. You can also visit the BlackVue Store on Amazon for product updates and accessories.

Documents connexes - DR750S-2CH

Préview Manuel d'utilisation de la caméra embarquée BlackVue DR750S-2CH | Installation, réglages et dépannage
Manuel d'utilisation complet pour la dashcam BlackVue DR750S-2CH, couvrant l'installation, la configuration, la gestion vidéo, les fonctionnalités cloud et le dépannage. Apprenez à utiliser efficacement votre dashcam.
Préview Série BlackVue DR770X Box : Guide d'installation, de connectivité cloud et d'utilisation
Guide complet pour la configuration et l'utilisation de la dashcam BlackVue DR770X Box Series, y compris l'intégration d'applications, la connectivité cloud via un point d'accès Wi-Fi ou une carte SIM, et viewer logiciel.
Préview BlackVue DR970X Box-2CH Plus Series : Manuel d'utilisation et guide d'installation
Guide complet de la dashcam BlackVue DR970X Box-2CH Plus Series, couvrant les fonctionnalités, l'installation, l'utilisation du logiciel, les spécifications et la maintenance. Découvrez comment télécharger des vidéos et utiliser le Web Viewer, et optimiser les performances.
Préview Guide d'installation et d'utilisation de la série BlackVue DR970X Box-2CH Plus
Un guide complet pour l'installation et l'utilisation de la dashcam BlackVue DR970X Box-2CH Plus Series, y compris la configuration de la caméra arrière, l'installation du module GNSS, l'installation du module de connectivité, les options de câble d'alimentation et l'utilisation de l'application.
Préview Guide de démarrage rapide BlackVue DR970X Box-2CH Plus et DR970X Box-2CH IR Plus
Ce guide de démarrage rapide fournit les informations essentielles pour l'installation et l'utilisation des systèmes de caméras embarquées BlackVue DR970X Box-2CH Plus et DR970X Box-2CH IR Plus. Il aborde les précautions de sécurité, les informations de conformité, le contenu de l'emballage, l'identification des composants et les étapes d'installation de l'unité principale et des caméras.
Préview Comment formater la carte SD de la caméra embarquée BlackVue DR650GW-2CH
Guide étape par étape pour formater la carte SD de la caméra embarquée BlackVue DR650GW-2CH avec l'application Windows. Comprend les instructions d'installation du logiciel et de formatage de la carte.