1. Introduction
The IK Multimedia iRig Mic HD 2 is a high-definition handheld digital microphone designed for professional audio recording on various devices, including iPhone, iPad, Mac, and PC. It features high-quality 24-bit converters with sample rates up to 96kHz, a low-noise preamp, and a gold-sputtered electret condenser capsule. This manual provides essential information for setting up, operating, and maintaining your iRig Mic HD 2.
2. Contenu du colis
Vérifiez que tous les éléments sont présents dans le colis :
- iRig Mic HD 2 Digital Microphone
- Câble Lightning iOS
- Câble USB
- Compact table tripod
- Mic stand adapter
- 5/8" to 3/8" thread adapter
- Pochette de transport
3. Principales caractéristiques
- Audio haute définition : 24-bit converters with sample rates up to 96kHz for pristine sound quality.
- Pré à faible bruitamp: Ensures clear recordings with minimal background noise.
- Gold-Sputtered Condenser Capsule: High-quality cardioid electret condenser capsule for excellent transient accuracy and wide frequency response.
- Sortie casque intégrée : Dedicated headphone output with volume control for direct monitoring.
- Onboard Gain Control: Multi-color LED level indicator provides real-time feedback for optimal input levels.
- Compatibilité universelle: Works with iPhone, iPad, Mac, and PC.
- Conception portable : Ergonomic handheld form factor suitable for various recording environments.
4. Produit terminéview
Figure 4.1 : Face avant view of the iRig Mic HD 2, showing the microphone grille and branding.
Figure 4.2: The iRig Mic HD 2 showing the gain control knob, headphone volume knob, and LED indicator.
Figure 4.3 : Côté view of the iRig Mic HD 2 mounted on a stand, highlighting the headphone output and USB connection port at the base.
Figure 4.4: Close-up of the bottom of the iRig Mic HD 2, showing the micro-USB port for connection and the 3.5mm headphone jack.
5. Guide de configuration
5.1 Connexion à un appareil
- Pour les appareils iOS (iPhone/iPad) : Use the provided Lightning cable. Connect the micro-USB end to the iRig Mic HD 2 and the Lightning end to your iOS device.
- Pour Mac/PC : Use the provided USB cable. Connect the micro-USB end to the iRig Mic HD 2 and the standard USB-A end to your computer's USB port.
5.2 Montage du microphone
- Utilisation sur table : Attach the iRig Mic HD 2 to the compact table tripod using the mic stand adapter.
- Standard Mic Stand: Use the mic stand adapter and the 5/8" to 3/8" thread adapter (if necessary) to mount the microphone on a standard microphone stand.
Figure 5.1: The iRig Mic HD 2 mounted on a standard microphone stand, ready for use.
Figure 5.2: The iRig Mic HD 2 set up with its included tripod, connected to a smartphone, alongside headphones for monitoring.
5.3 Installation du logiciel (facultatif)
For optimal performance and additional features, consider installing IK Multimedia's dedicated audio recording applications (e.g., iRig Recorder, VocaLive) available for iOS, Mac, and PC. Refer to the IK Multimedia webSite de téléchargement et instructions d'installation.
6. Mode d'emploi
6.1 Mise sous tension
The iRig Mic HD 2 is bus-powered, meaning it draws power directly from the connected device (iPhone, iPad, Mac, or PC). Simply connect the microphone, and it will power on automatically.
6.2 Réglage du gain d'entrée
- Locate the gain control knob on the microphone body.
- Rotate the knob to adjust the input sensitivity.
- Observe the multi-color LED indicator:
- Bleu: Signal present, good level.
- Vert: Optimal signal level.
- Rouge: Signal too hot (clipping). Reduce gain immediately to avoid distortion.
- Aim for a strong signal that primarily stays in the green, with occasional peaks into blue, and never red.
6.3 Surveillance audio
- Connect your headphones to the 3.5mm headphone output jack at the base of the microphone.
- Use the dedicated headphone volume control knob to adjust your monitoring level.
- This allows for real-time, direct monitoring of your audio without latency.
6.4 Recording Best Practices
- Emplacement du microphone : Position the microphone appropriately for the sound source. For vocals, typically 6-12 inches from the mouth. For instruments, experiment with distance and angle to capture the desired tone.
- Modèle cardioïde : The iRig Mic HD 2 has a cardioid pickup pattern, meaning it primarily picks up sound from the front and rejects sound from the sides and rear. Point the front of the microphone (where the grille is) directly at the sound source.
- Filtre anti-pop : While the microphone has an internal pop filter, using an external pop filter is recommended for vocal recordings to reduce plosive sounds (P, B).
- Environnement: Enregistrez dans un environnement calme afin de minimiser le bruit de fond.
Figure 6.1: A user recording vocals with the iRig Mic HD 2, connected to a smartphone displaying a recording application.
Figure 6.2: The iRig Mic HD 2 positioned to record an acoustic guitar, demonstrating its versatility for instrument recording.
Figure 6.3: A complete recording setup with the iRig Mic HD 2 capturing acoustic guitar, and a smartphone on a tripod for video or audio recording.
7. Entretien
- Nettoyage: Utilisez un chiffon doux et sec pour nettoyer le corps du microphone. N’utilisez pas de nettoyants liquides ni de solvants.
- Stockage: When not in use, store the iRig Mic HD 2 in its provided carrying pouch to protect it from dust and physical damage.
- Manutention: Évitez de laisser tomber le microphone ou de le soumettre à des chocs violents, car cela pourrait endommager ses composants internes.
- Environnement: Keep the microphone away from extreme temperatures, humidity, and direct sunlight.
8. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Aucun son du microphone. |
|
|
| Distorted or clipping audio. |
|
|
| No headphone monitoring. |
|
|
9. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Type de microphone | Microphone numérique à condensateur |
| Type de capsule | Gold-sputtered electret condenser |
| Diagramme polaire | Cardioïde |
| Une conversion A / N | 24 bits |
| Sample taux | Jusqu'à 96 kHz |
| Réponse en fréquence | 20 Hz - 20 kHz |
| Sortie casque | 3.5mm TRS jack with volume control |
| Connectivité | Micro-USB port (for Lightning and USB cables) |
| Dimensions | 4.83 x 4.83 x 18.8 cm |
| Poids | 322.05 g |
| Pouvoir | Bus powered by connected device |
| Accessoires inclus | Lightning iOS cable, USB cable, table tripod, mic stand adapter, 5/8" to 3/8" thread adapter, carrying pouch |
10. Garantie et assistance
Pour obtenir des informations sur la garantie et une assistance technique, veuillez consulter le site officiel d'IK Multimedia. webConsultez leur site web ou contactez directement leur service client. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.
- Fabricant: IK Multimédia
- Website: www.ikmultimedia.com
Des options de garantie prolongée peuvent être offertes par des fournisseurs tiers. Veuillez vous renseigner auprès de votre détaillant pour plus de détails.
