Carter's by DaVinci Morgan 6-Drawer Dresser User Manual

1. Introduction

Thank you for choosing the Carter's by DaVinci Morgan 6-Drawer Dresser. This manual provides essential information for the safe assembly, use, and maintenance of your dresser. Please read all instructions carefully before assembly and retain this manual for future reference.

2. Consignes de sécurité

Your child's safety is our top priority. This product is designed and tested to meet the highest safety standards. Adherence to the following safety guidelines is crucial:

• Kit anti-basculement : Always install the included anti-tip kit to securely fasten the dresser to a wall. This prevents serious injury from tip-over accidents.
• Limites de poids : Do not place excessively heavy items on top of the dresser or inside the drawers.
• Sécurité des tiroirs : Do not allow children to climb on or play with the drawers. Keep drawers closed when not in use.
• Chemical Emissions: This product is GREENGUARD GOLD Certified, meaning it has been tested for over 10,000 chemical emissions and VOCs, contributing to cleaner indoor air.
• Finition non toxique : The dresser features a non-toxic multi-step painting process and is lead and phthalate safe, exceeding CPSC’s ASTM F2057-23 standard for safety.

3. Parts List & Hardware

Before beginning assembly, ensure all parts and hardware are present and undamaged. Refer to the separate parts list diagram included in your packaging. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.

4. Instructions de montage

Assembly requires two adults. Follow the step-by-step instructions provided in the separate assembly guide. Ensure all fasteners are tightened securely, but do not overtighten. Periodically check all connections to ensure they remain tight.

Étapes clés de l'assemblage :

1. Déballez tous les composants et vérifiez-les par rapport à la liste des pièces.
2. Assemble the main frame of the dresser.
3. Install the drawer glides into the dresser frame.
4. Assemble each of the six drawers.
5. Insérez les tiroirs assemblés dans le cadre.
6. Attach the anti-tip kit to the back of the dresser and securely to a wall stud.

Figure 1 : Face avant view of the assembled Morgan 6-Drawer Dresser.

Figure 2 : Côté view illustrating the dresser dimensions (19"D x 52"W x 34"H).

5. Operating the Dresser

Fonctionnement du tiroir :

The six spacious drawers are equipped with pre-installed euro glides for smooth and easy opening and closing. To open, gently pull the knob. To close, push the drawer firmly until it is fully seated.

Changing Station Conversion:

This dresser is designed to accommodate a DaVinci changing tray (model #M0619, sold separately) for use as a convenient changing station. Place the changing tray securely on top of the dresser. Always ensure the changing tray is stable and properly positioned before use. Never leave a child unattended on the changing station.

Figure 3: Dresser shown with an optional changing tray (M0619) for conversion into a changing station.

6. Entretien et soins

To ensure the longevity and appearance of your dresser, follow these care instructions:

• Nettoyage: Essuyez les surfaces avec un chiffon doux, damp Chiffon. Évitez les nettoyants abrasifs ou les produits chimiques agressifs, car ils peuvent endommager la finition.
• Saupoudrage: Dépoussiérez régulièrement avec un chiffon doux et sec.
• Exposition au soleil : Évitez toute exposition prolongée à la lumière directe du soleil, qui peut entraîner une décoloration.
• Humidité: Maintenez un taux d'humidité constant dans la pièce pour éviter que le bois ne se déforme ou ne se fissure.
• Vérification du matériel : Vérifiez régulièrement le serrage de toutes les vis et fixations. Resserrer si nécessaire.

7. Dépannage

Si vous rencontrez des problèmes avec votre commode, consultez les solutions courantes suivantes :

• Tiroirs qui coincent : Ensure the drawer glides are clean and free of debris. Check that the drawers are properly aligned on their tracks.
• Loose Knobs: Tighten the screws from the inside of the drawer front.
• Commode bancale : Verify that the dresser is placed on a level surface. Check and tighten all assembly fasteners. Ensure the anti-tip kit is securely installed.

8. Spécifications

9. Garantie et assistance

For warranty information, product support, or to order replacement parts, please refer to the warranty card included with your purchase or visit the official DaVinci website. Do not return damaged or missing parts to the retailer.