Dibeisi Q1536 Stage/Concert Loudspeaker User Manual

Introduction

This manual provides essential information for the safe and effective operation of your Dibeisi Q1536 Stage/Concert Loudspeaker. Please read this manual thoroughly before using the product and retain it for future reference.

Figure 1 : Face avant view of the Dibeisi Q1536 Stage/Concert Loudspeaker, showcasing its robust black finish and protective metal grille over the woofer and tweeters.

Consignes de sécurité

• Ensure the loudspeaker is placed on a stable, level surface or securely mounted on a compatible stand using the integrated stand opening.
• Do not expose the loudspeaker to water, moisture, or extreme temperatures.
• Évitez de bloquer les ouvertures de ventilation pour éviter la surchauffe.
• N’essayez pas d’ouvrir ou de réparer vous-même le haut-parleur. Confiez toute réparation à un personnel qualifié.
• Utilisez uniquement les câbles et connecteurs spécifiés.

Installation

Déballage

Carefully remove the loudspeaker from its packaging. Inspect for any signs of damage during transit. Retain the packaging for future transport or storage.

Placement

The Dibeisi Q1536 is designed for floor mounting or stand mounting. When using a stand, ensure it is rated for the loudspeaker's weight and is stable. Position the loudspeaker to optimize sound dispersion for your specific environment.

Relations

The loudspeaker features 6.3 mm jack and 2x banana connectors for audio input. Ensure all connections are secure before powering on your audio system.

1. Connectez votre source audio (par exemple, amplifier, mixer) to the loudspeaker's input terminals using appropriate cables.
2. Assurez-vous que amplifier's power is off before making any connections.
3. Match the impedance of the loudspeaker (8 Ohm) with your amplifier's output impedance for optimal performance and safety.

Mode d'emploi

Mise sous tension

Once all connections are made, power on your audio source (e.g., amplifier) first, then gradually increase the volume to the desired level. Avoid sudden high volume inputs.

Contrôle du volume

Adjust the volume from your audio source. Do not exceed the loudspeaker's maximum power handling capacity (700 W peak, 300 W RMS) to prevent damage.

Mise hors tension

Before powering off your audio source, reduce the volume to minimum. This prevents sudden pops or thumps that could damage the loudspeaker.

Entretien

• Nettoyage: Use a soft, dry cloth to clean the exterior of the loudspeaker. Do not use liquid cleaners or abrasive materials.
• Stockage: If storing the loudspeaker for an extended period, keep it in a dry, cool place, ideally in its original packaging to protect it from dust and physical damage.
• Inspection: Periodically check cables and connectors for wear or damage. Replace any damaged components immediately.

Dépannage

Caractéristiques

Garantie et assistance

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact Dibeisi customer service. Keep your proof of purchase for warranty claims.

For further assistance, please visit the official Dibeisi webconsultez votre site web ou contactez votre distributeur local.