Field Controls UV-16/120 UV-Aire In Duct Air Purifier

1. Introduction et présentation du produitview

The Field Controls UV-16/120 UV-Aire In Duct Air Purifier is designed to improve indoor air quality by utilizing ultraviolet (UV-C) light technology. This device is installed directly into your HVAC system's ductwork, where it neutralizes airborne contaminants such as bacteria, viruses, mold spores, and allergens as air passes through. This manual provides essential information for the safe and effective installation, operation, and maintenance of your UV-Aire system.

This image displays the Field Controls UV-16/120 UV-Aire In Duct Air Purifier, a compact white unit designed for installation within HVAC ductwork. A blue glowing UV lamp is visible extending from the right side of the main housing, indicating its air purification function.

2. Consignes de sécurité

Veuillez lire attentivement toutes les consignes de sécurité avant l'installation et l'utilisation. Le non-respect de ces consignes peut entraîner un choc électrique, un incendie ou des blessures graves.

• Risque électrique : This unit operates on 120 Volts. Ensure power to the HVAC system is disconnected at the circuit breaker before any installation or maintenance.
• Risque lié aux rayonnements UV : Ne regardez pas directement les UV lamp when it is illuminated. UV-C light can cause severe eye and skin damage. Always ensure the lamp is off and cooled before handling.
• Installation: Installation should be performed by a qualified HVAC technician or electrician in accordance with all local and national electrical and building codes.
• Entretien: Only use genuine Field Controls replacement parts. Refer to the maintenance section for bulb replacement procedures.
• Avis de non-responsabilité juridique : Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. (Note: This disclaimer is provided as per product information, though its direct relevance to an air purifier may vary.)

3. Contenu du colis

Verify that all components are present and undamaged before beginning installation. If any items are missing or damaged, contact your supplier immediately.

• UV-16/120 UV-Aire In Duct Air Purifier Unit (with integrated ballast)
• UV-C Lamp (pre-installed or separate)
• Matériel de montage (vis, rondelles)
• Modèle d'installation (le cas échéant)
• Manuel de l'utilisateur (ce document)

4. Configuration et installation

The UV-16/120 UV-Aire unit is designed for installation within the return or supply air duct of your HVAC system. Proper placement is crucial for effective air purification.

1. Coupure de courant : Turn off all power to the HVAC system at the main electrical panel or circuit breaker. Verify power is off using a voltage testeur.
2. Sélectionnez l'emplacement d'installation : Choose a location in the ductwork that allows for sufficient airflow around the UV lamp and provides easy access for future maintenance (e.g., bulb replacement). Ensure there is at least 16 inches of clear space for the lamp.
3. Ouverture coupée : Using the provided template (if applicable) or the unit's dimensions, carefully cut an opening in the ductwork for the main housing of the UV-Aire unit. Ensure the opening is clean and free of sharp edges.
4. Montez l'unité : Insert the UV-Aire unit into the cut opening. Secure the unit to the ductwork using the provided mounting screws. Ensure a tight seal to prevent air leakage.
5. Connexion électrique : Connect the unit's power cord to a dedicated 120 Volt power source, typically wired into the HVAC system's control circuit so it operates when the fan is running. Follow all local electrical codes. The unit features a safety disconnect for added protection.
6. Installer UV Lamp: Si le lamp is not pre-installed, carefully insert the UV-C lamp into its receptacle on the unit. Ensure it is securely seated. Avoid touching the glass portion of the lamp à mains nues.
7. Restaurer l'alimentation : Once installation is complete and all connections are secure, restore power to the HVAC system.

5. Mode d'emploi

The Field Controls UV-16/120 UV-Aire In Duct Air Purifier is designed for continuous operation when your HVAC system's fan is running. It does not require daily user interaction.

• Opération automatique: The unit is typically wired to operate in conjunction with your HVAC system's fan. When the fan is on, the UV lamp will illuminate, and air purification will begin.
• Voyant lumineux : The unit may feature an indicator light (often blue or green) to confirm that the UV lamp is operational. If this light is off, the lamp may need replacement or there may be a power issue.
• Contrôle des boutons : While primarily automatic, the unit may have a simple button control for specific functions, such as a reset or a manual override for testing. Refer to the unit's labeling for specific button functions.

6. Entretien

Regular maintenance ensures the continued effectiveness and longevity of your UV-Aire system.

• UVLamp Remplacement: UV-C lamps have a finite lifespan, typically 9,000 hours (approximately 1 year of continuous use). The effectiveness of the lamp diminishes over time, even if it still glows. It is recommended to replace the UV lamp annually to maintain optimal purification performance.
• Procédure de remplacement:
  1. Coupez l'alimentation du système de chauffage, ventilation et climatisation au niveau du disjoncteur.
  2. Autoriser le lamp to cool for several minutes.
  3. Retirez délicatement l'ancien lamp by twisting and pulling it out of its receptacle.
  4. Jeter l'ancien lamp conformément à la réglementation locale relative aux ampoules fluorescentes.
  5. Insert the new genuine Field Controls replacement lamp, ensuring it clicks securely into place. Avoid touching the glass with bare hands; use gloves or a clean cloth.
  6. Rétablir l'alimentation du système CVC.
• Nettoyage: Periodically inspect the UV lamp and the interior of the unit for dust or debris accumulation. If necessary, gently wipe the lamp with a clean, dry, lint-free cloth after disconnecting power and allowing it to cool. Do not use liquid cleaners.

7. Dépannage

If your UV-Aire system is not functioning as expected, refer to the following common issues and solutions:

If the problem persists after attempting these solutions, contact Field Controls customer support or a qualified HVAC professional.

8. Spécifications

Key technical specifications for the Field Controls UV-16/120 UV-Aire In Duct Air Purifier:

• Numéro de modèle : UV 16
• ASIN: B01N2JVMLJ
• Voltage: 120 volts
• Lamp Taper: UV-C (Ultraviolet Germicidal Irradiation)
• Type de filtre : UV Light (not a particulate filter)
• Couleur: Blanc cassé
• Type de contrôleur: Button Control (for specific functions)
• Dimensions: Designed for 16-inch duct applications (refer to product diagram for exact unit dimensions)
• Première disponibilité : 18 décembre 2016

9. Informations sur la garantie

Specific warranty terms for the Field Controls UV-16/120 UV-Aire In Duct Air Purifier are typically provided at the time of purchase or can be obtained directly from Field Controls or your authorized dealer. It is recommended to retain your proof of purchase for warranty claims.

Extended protection plans may be available from third-party providers at the point of sale. These plans are separate from the manufacturer's warranty.

10. Assistance

For technical assistance, replacement parts, or further inquiries regarding your Field Controls UV-16/120 UV-Aire In Duct Air Purifier, please contact:

• Field Controls Customer Service: Refer to the official Field Controls webPour obtenir les coordonnées les plus récentes (téléphone, courriel ou portail d'assistance), veuillez consulter le site web ou l'emballage du produit.
• Your Authorized Dealer/Installer: The professional who installed your unit can often provide immediate assistance and troubleshooting.

When contacting support, please have your product model number (UV 16) and date of purchase readily available.