1. Introduction
The DigiTech Bass Whammy is an advanced pitch shifting effect pedal designed specifically for bass guitar. It utilizes sophisticated pitch detection and polyphonic note tracking technology to deliver a wide range of expressive effects. This manual provides essential information for setting up, operating, and maintaining your Bass Whammy pedal.
2. Contenu de la boîte
- 1 x DigiTech Bass Whammy Effect Pedal
- 1 bloc d'alimentation (9 V CC)
- 2 x Strukture Right-Angle Guitar Patch Cable (6 in.)
- 2 x Strukture Rubber Instrument Cable
3. Installation
Figure 1 : Haut view of the DigiTech Bass Whammy Effect Pedal.
3.1 Connexion d'alimentation
Connect the included 9V DC power supply to the pedal's power input jack. Ensure the power supply is compatible with the pedal's voltage exigences pour éviter les dommages.
3.2 Connexions audio
- Connectez votre guitare basse au SAISIR jack on the pedal using one of the provided instrument cables.
- Connectez le SORTIR jack de la pédale à votre amplifier or next effect pedal in the signal chain using another instrument cable.
- The pedal features true bypass, ensuring your signal remains unaffected when the pedal is disengaged.
3.3 MIDI Control
The Bass Whammy is MIDI controllable, allowing for external control over its functions. Connect a MIDI cable from your MIDI controller to the pedal's MIDI input for advanced integration into your setup.
4. Modes de fonctionnement et commandes
The Bass Whammy offers various pitch shifting modes and controls for creative sound manipulation.
4.1 Sélection du mode
Utilisez le HARMONY/WHAMMY selector switch to choose between two main categories of effects:
- HARMONY: Adds a harmonized note to your original signal.
- WHAMMY: Shifts your original note up or down by a selected interval.
4.2 Interval Selection
Once a mode is selected, use the rotary knob to choose the specific pitch interval for the effect. Available intervals include various octaves, 4ths, 5ths, and more. The LEDs next to the intervals indicate the currently selected setting.
4.3 Detune
Le SHALLOW DETUNE / DEEP DETUNE switch allows you to apply a subtle or more pronounced detuning effect to your signal, adding chorus-like textures.
4.4 Dive Bomb
Le BOMBE EN PLONGÉE setting, typically found within the WHAMMY mode, allows for extreme downward pitch shifts, mimicking the sound of a guitar tremolo bar dive.
Pédale d'expression 4.5
The integrated expression pedal controls the pitch shift amount. Moving the pedal from heel to toe smoothly transitions the pitch through the selected interval.
4.6 Bypass Footswitch
Press the bypass footswitch to engage or disengage the effect. An indicator LED will illuminate when the effect is active.
5. Spécifications
| Fonctionnalité | Spécification |
|---|---|
| Poids de l'article | 2 livres |
| Dimensions du produit | 7.75 x 6.5 x 2.5 pouces |
| Source d'énergie | Alimentation électrique filaire (9 V CC) |
| Voltage | 9 volts |
| Type de connecteur | prise audio mono 6.35 mm (1/4 pouce) |
| Format du signal | Analogique |
| Contrôle MIDI | Oui |
| Type de dérivation | True Bypass |
6. Entretien
To ensure the longevity and optimal performance of your Bass Whammy pedal, follow these maintenance guidelines:
- Nettoyage: Utilisez un chiffon doux et sec pour nettoyer l'extérieur de la pédale. Évitez les nettoyants abrasifs et les solvants.
- Stockage: Rangez la pédale dans un endroit sec, à l'abri des températures extrêmes et de la lumière directe du soleil.
- Pouvoir: Always use the specified 9V DC power supply. Disconnect power when the pedal is not in use for extended periods.
7. Dépannage
If you encounter issues with your Bass Whammy, try the following steps:
- Pas de son : Check all cable connections (input, output, power). Ensure the power supply is working and correctly connected. Verify your instrument and amplifier are functioning.
- Poor Pitch Tracking: Ensure your instrument's intonation is correct. Try adjusting your playing dynamics.
- Bruit indésirable : Check for faulty cables. Ensure the power supply is stable and free from interference. If using other pedals, isolate the Bass Whammy to determine if it's the source of the noise.
- Pédale ne répondant pas : Disconnect and reconnect the power supply. Check MIDI connections if external control is being used.
If problems persist, consult the DigiTech support website ou contacter le service client.
8. Garantie et assistance
The DigiTech Bass Whammy Effect Pedal comes with a limited manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, product registration, or further assistance, visit the official DigiTech website ou contactez leur service client.
