Somfy LT50 506S2 Tubular Motor User Manual

1. Introduction

This manual provides essential instructions for the safe installation, operation, and maintenance of your Somfy LT50 506S2 Tubular Motor. Please read this manual thoroughly before installation and use, and retain it for future reference.

The Somfy LT50 506S2 is a robust tubular motor designed for various applications requiring automated movement, such as blinds, shades, or projection screens. It features a torque of 6Nm (53 in.lbs), a speed of 38rpm, and operates on 120V.

Remarque importante : The Somfy LT50 506S2 (Product Code #1032016) has been discontinued and is replaced by the Somfy LT50 506S2 Sonesse RH 6Nm 32rpm 120V (Product Code #1001812). This manual pertains to the original LT50 506S2 model.

2. Consignes de sécurité

Respectez toujours les consignes de sécurité suivantes afin d'éviter les blessures ou d'endommager le produit :

• Sécurité électrique : Installation and wiring must be performed by a qualified electrician in accordance with all local and national electrical codes. Disconnect power before performing any service or maintenance.
• Sécurité mécanique : Ensure all mounting hardware is securely fastened. Keep hands, hair, and loose clothing clear of moving parts during operation.
• Conditions environnementales : N’exposez pas le moteur à l’humidité, aux températures extrêmes ou aux environnements corrosifs.
• Utilisation prévue : Use this motor only for its intended purpose as described in this manual. Any unauthorized modifications or uses may void the warranty and create hazards.
• Enfants et animaux domestiques : Keep children and pets away from the operating area of the motorized application.

3. Configuration et installation

Proper installation is crucial for the motor's performance and longevity. Refer to the specific mounting instructions provided with your application (e.g., blind or shade system) for detailed steps.

3.1 Contenu du paquet

Vérifiez que tous les composants sont présents avant de commencer l'installation :

• Somfy LT50 506S2 Tubular Motor
• Câble d'alimentation (attaché)
• Mounting Brackets (may be supplied separately with the application)
• Crown and Drive Wheel (may be supplied separately with the application)

3.2 Motor Overview

Figure 1 : Fin view of the Somfy LT50 506S2 motor, highlighting the round drive head where the crown and drive wheel attach.

The image above shows the drive head of the Somfy LT50 506S2 motor. This is where the crown and drive wheel are fitted to engage with the tube of your application (e.g., roller blind). The central opening is for the limit setting tool.

3.3 Montage du moteur

1. Attach the crown and drive wheel to the motor head. Ensure they are seated correctly.
2. Insert the motor into the tube of your application. The drive wheel should fit snugly inside the tube.
3. Mount the assembly into the chosen location using appropriate brackets. Ensure the motor is level and securely supported.
4. Verify that the tube rotates freely without obstruction.

3.4 Câblage électrique

The Somfy LT50 506S2 operates on 120V AC. Wiring must be performed by a qualified professional.

• Connect the motor's power cable to a suitable 120V AC power supply, typically through a wall switch or control system.
• Assurez une bonne mise à la terre.
• Refer to the wiring diagram provided with your specific control system or switch for exact connections (Live Up, Live Down, Neutral, Ground).

3.5 Fixer les limites

Limit settings define the upper and lower stopping points of your application. This motor uses mechanical limit switches, typically adjusted with a specialized tool (often a small hex key or screwdriver) inserted into the holes on the motor head.

1. Mise sous tension : Appliquer la puissance au moteur.
2. Identifier les vis de réglage : Locate the two adjustment screws on the motor head. One controls the upper limit, the other the lower limit. Consult your application's specific instructions to identify which screw corresponds to which limit.
3. Définir la limite supérieure :
   • Run the application upwards until it reaches the desired upper stopping point.
   • Insert the adjustment tool into the corresponding screw and turn it slowly. Turning in one direction will extend the travel, the other will retract it. Adjust until the motor stops precisely at the desired upper position.
4. Définir la limite inférieure :
   • Run the application downwards until it reaches the desired lower stopping point.
   • Insert the adjustment tool into the corresponding screw and adjust until the motor stops precisely at the desired lower position.
5. Test Limits: Cycle the application up and down several times to ensure the limits are set correctly and consistently.

4. Mode d'emploi

The Somfy LT50 506S2 motor is typically controlled by a wall switch or a remote control system (sold separately).

4.1 Basic Operation (Wall Switch)

• Bouton HAUT : Press and hold to move the application upwards. Release to stop. If limits are set, a quick press may send it to the upper limit.
• Bouton BAS : Press and hold to move the application downwards. Release to stop. If limits are set, a quick press may send it to the lower limit.
• STOP Button (if available): Press to immediately stop the application at its current position.

4.2 Fonctionnement de la télécommande (le cas échéant)

If using a Somfy remote control, refer to the remote's specific instructions for pairing and operation. Generally, the remote will have dedicated buttons for Up, Down, and Stop functions, similar to a wall switch.

5. Entretien

The Somfy LT50 506S2 motor is designed for minimal maintenance. However, periodic checks can ensure optimal performance.

• Nettoyage: Veillez à ce que le moteur et la zone environnante restent exempts de poussière et de débris. Utilisez un chiffon doux et sec pour le nettoyage. N'utilisez pas de produits abrasifs ni de solvants.
• Inspection: Periodically inspect the power cable for any signs of damage. Check mounting brackets for tightness.
• Lubrification: Le moteur est lubrifié en usine et ne nécessite aucune lubrification supplémentaire.
• Service professionnel: If the motor exhibits unusual noise, erratic operation, or fails to respond, contact a qualified service technician. Do not attempt to open or repair the motor yourself.

6. Dépannage

Avant de contacter le support, review Voici les problèmes courants et leurs solutions :

7. Spécifications

8. Garantie et assistance

For warranty information and technical support, please refer to the official Somfy website or contact your authorized Somfy dealer. Keep your purchase receipt as proof of purchase.

Ressources en ligne : www.somfy.com