Manuel d'utilisation du capteur de pression des pneus TPMS MOBILETRON MORESENSOR Signature Series 315 MHz

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of the MOBILETRON MORESENSOR Signature Series 315MHz TPMS Tire Pressure Sensor, model CX-S002. This sensor is designed as a direct replacement for original equipment (OE) TPMS sensors in compatible vehicles, transmitting real-time tire pressure data to the vehicle's Electronic Control Unit (ECU).

Image 1.1: The MORESENSOR Signature Series 315MHz TPMS Sensor (Model CX-S002). This image displays the red sensor unit with its metal valve stem, indicating the 315MHz frequency and FCC ID.

2. Compatibilité avec les véhicules

The MORESENSOR Signature Series TPMS sensor (CX-S002) is pre-programmed for a wide range of European brand models. It is crucial to verify compatibility with your specific vehicle before installation. Refer to your vehicle's owner's manual or use a reliable part finder tool to confirm fitment.

Key compatibility considerations:

• Fréquence radio: Ensure your vehicle requires a 315MHz TPMS sensor.
• Détails du véhicule : Confirm your vehicle's make, model, and year.
• Année de production: Verify your vehicle's production year for accurate sensor matching.

Example of compatible vehicles (not exhaustive):

• BMW (E46, E39, E60, E61, E38, E66 series)
• Audi (A6, Allroad Quattro, S8)
• Porsche (Cayenne)
• Mercedes-Benz (CL, E, S, SL, SLR McLaren series)
• Volkswagen (Phaeton)

For a complete list and to verify fitment, consult the product listing or contact customer support with your vehicle's information.

3. Important Safety Information and Pre-Installation Checks

TPMS sensor installation is not a do-it-yourself (DIY) task. It requires specialized knowledge, skills, and equipment. Only qualified and certified mechanics with appropriate tools should perform the installation and relearn procedures.

Image 3.1: A graphic detailing critical information before purchasing and installing the TPMS sensor. It emphasizes that TPMS installation is not a DIY task and requires professional expertise.

3.1. Liste de vérification avant installation :

• Installation professionnelle : Assurez-vous que l'installation soit effectuée par un technicien qualifié.
• Compatibilité des outils : Do not attempt installation if your diagnostic tools cannot detect or communicate with the sensor (e.g., read sensor ID, frequency, battery status, PSI).
• Pre-programmed Status: This sensor is pre-programmed, meaning it is ready for pairing/re-learning with your vehicle's ECU.

Clause de non-responsabilité: Mobiletron and its distributors are not responsible for labor or service costs incurred from installation failures due to improper handling, incompatible scan tools, or lack of proper relearn procedures. Reimbursement will not be applicable if sensor replacement is done by a DIYer or uncertified mechanic/technician.

4. Configuration et installation

The MORESENSOR Signature Series TPMS sensor is designed for direct fitment and is pre-programmed for compatible vehicles, simplifying the installation process. However, a relearn procedure is always required.

4.1. Installation Steps (Professional Installation Recommended):

1. Démontage du pneu : Safely remove the tire from the wheel.
2. Retrait de l'ancien capteur : Carefully remove the existing TPMS sensor from the wheel.
3. Installation du nouveau capteur : Install the MORESENSOR CX-S002 sensor into the wheel. Ensure the adjustable valve stem is correctly positioned for your rim type.
4. Montage des pneus : Mount the tire back onto the wheel, taking care not to damage the sensor.
5. Gonflage des pneus : Gonflez le pneu à la pression recommandée par le fabricant.
6. Équilibrage des roues : Équilibrer l'ensemble roue et pneu.

Image 4.1: A visual representation of the TPMS sensor installed on a wheel rim. This demonstrates the sensor's placement and the "snap-in" installation method.

4.2. Relearn Procedure:

After physical installation, all new TPMS sensors require a relearn procedure to pair with the vehicle's ECU. This allows the vehicle to recognize the new sensor and display accurate tire pressure information.

• Consultez le manuel du propriétaire : Refer to your vehicle's owner's manual for specific standard relearn instructions.
• Outils professionnels: A professional TPMS diagnostic tool may be required to initiate and complete the relearn process, especially for certain vehicle models.
• Réapprentissage automatique : Some vehicles feature an "auto-relearn" function, where the sensors are automatically recognized after driving for a certain period. However, manual initiation or a scan tool might still be necessary.

Image 4.2: This image highlights the patented design of the 40° angle adjustable valve stem, illustrating its flexibility to fit various standard OE and aftermarket rims.

5. Fonctionnement

Once properly installed and relearned, the MORESENSOR CX-S002 TPMS sensor will continuously monitor your tire pressure and transmit this data wirelessly to your vehicle's TPMS receiver. The vehicle's system will then display the tire pressure readings, typically on the dashboard or through a dedicated TPMS display.

• Surveillance en temps réel: The sensor transmits real-time tire pressure data.
• Low Pressure Warning: If tire pressure drops below a safe threshold, your vehicle's TPMS warning light will illuminate.
• Fréquence: Operates at 315MHz, ensuring reliable communication with compatible vehicle systems.

6. Entretien

The MORESENSOR TPMS sensor is designed for long-term reliability with minimal maintenance. The primary component requiring eventual replacement is the internal battery.

• Autonomie de la batterie : The average lifespan of the sensor's internal battery is 5-8 years. Battery life can vary based on usage and environmental conditions.
• Remplacement du capteur : When the battery depletes, the entire sensor unit typically needs to be replaced, as the battery is not user-replaceable.
• Valve Stem Inspection: During tire rotations or replacements, inspect the valve stem for any signs of damage or corrosion. The reinforced plastic and metal valve stem is designed for durability and anodized to prevent rust and corrosion.

7. Dépannage

If you experience issues with your TPMS system after installing the MORESENSOR CX-S002, consider the following common troubleshooting steps:

• Voyant d'avertissement TPMS allumé :
  • Vérifiez la pression des pneus : Manually check and adjust all tire pressures to the recommended levels.
  • Procédure de réapprentissage : Ensure the relearn procedure was successfully completed. If unsure, repeat the procedure or have a professional perform it.
  • Sensor Communication: A professional diagnostic tool can verify if the sensor is transmitting data and if the vehicle's receiver is detecting it.
• Lectures incorrectes :
  • Sensor ID Mismatch: Confirm that the correct sensor IDs have been registered with the vehicle's ECU during the relearn process.
  • Ingérence: While designed to minimize electromagnetic interference, ensure no external factors are disrupting the signal.
• Capteur non détecté :
  • Vérification de l'installation : Verify the sensor is correctly installed in the wheel.
  • État de la batterie : Although new, a faulty sensor battery is rare but possible. A diagnostic tool can check battery status.

For persistent issues, it is recommended to consult a certified automotive technician or contact MOBILETRON customer support.

8. Spécifications

Image 8.1: An infographic detailing key features of the MORESENSOR Signature Series TPMS sensor, including its precision engineering, industrial-grade composite, seamless molding, all-weather rubber stem, 5-8 year battery life, 315 MHz frequency, and 3-year warranty.

9. Garantie et assistance

9.1. Informations sur la garantie :

The MORESENSOR Signature Series TPMS sensor comes with a Garantie limitée de 3 ans. This warranty covers the product itself. Please note that the warranty does not cover labor or service costs incurred from product installation, service, equipment, alignment, or other inspections.

9.2. Assistance clientèle :

For further assistance, technical inquiries, or warranty claims, please contact MOBILETRON customer support. You can find contact information on the official MOBILETRON websur le site ou auprès de votre point de vente.

MOBILETRON is a specialized manufacturer of automobile sensing systems and components, committed to providing quality electronic products for the aftermarket and OE replacement, particularly for driving safety-related components.