1. Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your Ancona AN-1364 Inserta Plus 36-inch Built-in Range Hood. Please read these instructions thoroughly before installation and use, and retain them for future reference.
The Ancona AN-1364 Inserta Plus is a 36-inch ducted built-in range hood designed for integration into kitchen cabinetry. It features a 420 CFM ventilation system, 3-speed electronic controls, LED lighting, and dishwasher-safe aluminum mesh filters with stainless steel decorative panels.
Illustration 1.1 : Avant view of the Ancona AN-1364 Inserta Plus 36-inch Range Hood, showcasing son design élégant en acier inoxydable et son éclairage intégré.
2. Consignes de sécurité
Pour réduire les risques d'incendie, d'électrocution ou de blessure, veuillez respecter les consignes suivantes :
- Les travaux d’installation et le câblage électrique doivent être effectués par des personnes qualifiées, conformément à tous les codes et normes applicables, y compris en matière de construction coupe-feu.
- Une quantité suffisante d'air est nécessaire pour une combustion adéquate et pour l'évacuation des gaz par le conduit de fumée (cheminée) de l'équipement à combustion afin d'éviter tout refoulement.
- Lors de la découpe ou du perçage dans un mur ou un plafond, n'endommagez pas le câblage électrique et les autres services publics cachés.
- Les ventilateurs canalisés doivent toujours être évacués vers l'extérieur.
- N’utilisez pas cet appareil avec un dispositif de contrôle de vitesse à semi-conducteurs.
- Pour réduire les risques d’incendie, utilisez uniquement des conduits métalliques.
- Always disconnect power from the unit before servicing or cleaning.
- Clean grease laden surfaces frequently. Accumulated grease may ignite.
3. Contenu du colis
Vérifiez que tous les composants sont présents avant de commencer l'installation :
- Ancona AN-1364 Inserta Plus Range Hood Unit
- Filtres en maille d'aluminium (préinstallés)
- Damper/Flange
- Damper Vis
- Manuel d'instructions (ce document)
- Informations sur la garantie
4. Configuration et installation
The Ancona AN-1364 is designed for built-in installation within kitchen cabinetry. Professional installation is recommended to ensure proper fit, ventilation, and electrical connections.
4.1 Dimensions and Cabinetry Requirements
Ensure your cabinetry provides adequate space for the range hood. The unit measures approximately 35.4 inches (90 cm) in width, 11.5 inches (29 cm) in depth, and 10 inches (25.4 cm) in height. Refer to the diagram below for detailed dimensions and the built-in style.
Image 4.1: Detailed dimensions of the range hood and a schematic illustrating its built-in installation within a cabinet.
4.2 Options de ventilation
The range hood requires a top 6-inch round ventilation duct. It supports both horizontal wall venting and vertical roof venting configurations. Ensure proper ductwork is installed to exhaust air outdoors.
Image 4.2: Diagrams showing typical setups for horizontal wall venting with a side wall cap and vertical roof venting with a roof cap.
4.3 Connexion électrique
The unit operates on 120 Volts. All electrical connections must comply with local codes and be performed by a qualified electrician.
5. Mode d'emploi
The Ancona AN-1364 features intuitive electronic controls for fan speed and lighting.
5.1 Panneau de contrôle
The control panel is located on the front of the unit. It includes buttons for power, fan speed adjustment, and light control.
Image 5.1 : Gros plan view of the control panel with buttons for fan speed and light, alongside the LED lights and mesh filters.
5.2 Fonctionnement du ventilateur
- Marche/Arrêt : Appuyez sur le bouton d'alimentation pour allumer ou éteindre le ventilateur.
- Réglage de la vitesse: Use the speed control buttons to cycle through the 3 available fan speeds (Low, Medium, High). Select a speed appropriate for the cooking intensity.
- Arrêt automatique: The unit features a convenient delayed auto shut-off function, adjustable up to 10 minutes. Consult the full manual for specific programming instructions.
Image 5.2: Illustration demonstrating the range hood's effectiveness in extracting excess heat and odors from the cooking area.
5.3 Éclairage
Press the light button on the control panel to turn the LED lights on or off. The two 2.55-watt LED lights provide bright illumination for your cooking surface.
6. Entretien
Regular maintenance ensures optimal performance and longevity of your range hood. Always disconnect power before performing any maintenance.
6.1 Nettoyage des filtres
The aluminum mesh filters with stainless steel decorative panels are designed to trap grease and are dishwasher-safe. Clean them regularly (e.g., monthly, depending on usage) to maintain airflow and prevent grease buildup.
- Carefully remove the filters from the range hood.
- Place the filters in a dishwasher or wash them by hand with hot water and a mild detergent.
- Ensure filters are completely dry before re-installing them.
6.2 Nettoyage de l'extérieur
Wipe the stainless steel exterior surfaces with a clean cloth dampened with warm water and a mild, non-abrasive detergent. Dry thoroughly with a soft cloth. Avoid using abrasive cleaners or scouring pads, which can scratch the finish.
6.3 lumières LED
The LED lights are designed for long life. If replacement is ever needed, consult a qualified technician or the manufacturer's support for guidance.
7. Dépannage
Avant de contacter le support, review Voici les problèmes courants et leurs solutions :
| Problème | Cause possible | Solution |
|---|---|---|
| Le ventilateur ne fonctionne pas. | No power, circuit breaker tripped, loose wiring. | Check power supply. Reset circuit breaker. Ensure all connections are secure (consult electrician). |
| Les lumières ne fonctionnent pas. | No power, faulty LED, loose connection. | Check power supply. Ensure light button is pressed. If problem persists, contact support. |
| Performances d'aspiration médiocres. | Clogged filters, restricted ductwork, incorrect fan speed. | Nettoyez ou remplacez les filtres. Vérifiez que les conduits d'aération ne sont pas obstrués. Augmentez la vitesse du ventilateur. |
| Bruit excessif. | Loose components, motor issue, ductwork vibration. | Ensure filters are properly seated. Check for loose screws. Inspect ductwork for proper installation. |
8. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Modèle | AN-1364 |
| Dimensions (L x l x H) | 35.4 x 11.5 x 10.13 pouces (900 mm x 290 mm x 254 mm) |
| Capacité de débit d'air | 420 pieds cubes par minute (CFM) |
| Matériel | High-quality 430 Stainless Steel |
| Niveau de bruit | 2.1 sons |
| Type de montage | Support intégré |
| Type de contrôles | 3-Speed Electronic Push Button |
| Voltage | 120 volts |
| Quoitage | 215 watts |
| Type de source lumineuse | 2 x 2.55-watt LED Lights |
| Type de filtre | Dishwasher-safe Aluminum Mesh with Stainless Steel Panels |
| Type de ventilation | Ducted Exhaust (Top 6-inch round) |
| Certifications | cULus |
| Poids de l'article | 22 livres |
9. Garantie et assistance
This product comes with a manufacturer's warranty. Please refer to the included warranty document for details regarding coverage, terms, and conditions.
For technical assistance, replacement parts, or warranty claims, please contact Ancona customer support. Contact information can typically be found on the Ancona websur le site ou dans la documentation de garantie fournie avec votre produit.