1. Introduction
This manual provides essential instructions for the safe installation, operation, and maintenance of your BFT ICARO Slide Gate Opener. The ICARO series is designed for intensive use, offering robust performance and reliability for sliding gates. Please read this manual thoroughly before proceeding with any installation or operation to ensure proper function and to prevent damage or injury.
The BFT ICARO Slide Gate Opener features a monoblock gear motor structure, ensuring maximum resistance and performance in various environmental conditions. It includes proximity limit switches for accurate gate positioning and a control unit with a programming display and D-Track torque, speed, and position management system. An incorporated dual-channel radio receiver simplifies remote control integration.
Figure 1: BFT ICARO Slide Gate Opener main unit. This image shows the compact design and robust casing of the gate opener.
2. Consignes de sécurité
AVERTISSEMENT: Failure to follow these safety instructions could result in serious injury or death, and/or damage to the product or property.
- Installation and repair must be performed by qualified personnel only.
- Assurez-vous que l'alimentation électrique est débranchée avant d'effectuer toute opération de maintenance ou de réparation.
- Keep hands, feet, and clothing clear of the gate and opener while the system is in operation.
- Ne laissez pas les enfants jouer avec les commandes d'ouverture du portail ni les actionner.
- Inspectez régulièrement le portail et son mécanisme d'ouverture afin de déceler tout signe d'usure, de dommage ou de désalignement.
- Install safety devices such as photocells and safety edges to prevent entrapment.
- Ensure the gate moves freely and is properly balanced before installing the opener.
3. Configuration et installation
This section outlines the general steps for installing the BFT ICARO Slide Gate Opener. For detailed diagrams and specific wiring instructions, refer to the separate installation guide provided with your product.
3.1 Préparation du site
- Assurez-vous que le rail du portail est propre et dégagé de tout obstacle.
- Verify the gate slides smoothly by hand and is properly aligned.
- Prepare a stable concrete base for mounting the opener unit, ensuring it is level and positioned correctly relative to the gate.
3.2 Montage de l'ouvre-porte
- Securely fasten the opener unit to the prepared concrete base using appropriate anchor bolts.
- Ensure the pinion gear is correctly aligned with the gate's rack, maintaining a small clearance (approx. 1-2 mm) to allow for thermal expansion.
3.3 Connexions électriques
- Connect the main power supply (230 V, 60 Hz single-phase) to the control unit, ensuring all connections comply with local electrical codes.
- Wire all safety devices (photocells, safety edges) to the control unit as per the wiring diagram.
- Connect any accessories such as remote receivers or keypads.
3.4 Programmation initiale
- Power on the unit. The integrated LEO B CBB control panel will display programming options.
- Follow the on-screen instructions to perform an auto-setup cycle, which will detect the gate's travel limits and adjust motor parameters.
- Test all safety devices to ensure they function correctly before operating the gate automatically.
4. Mode d'emploi
The BFT ICARO Slide Gate Opener can be operated using various methods, including remote controls, keypads, or other access control systems connected to the integrated dual-channel radio receiver.
4.1 Fonctionnement automatique
- Press the designated button on your remote control or keypad to initiate gate movement.
- The gate will open or close to its programmed limit. A second press during movement will typically stop the gate. A third press will reverse its direction.
- The D-Track system continuously monitors torque, speed, and position, ensuring smooth and safe operation.
4.2 Libération manuelle
En cas de panne de courant ou de dysfonctionnement, le portail peut être actionné manuellement.
- Locate the manual release knob on the opener unit.
- Insert the provided key (if applicable) and turn the knob to disengage the motor.
- The gate can now be pushed open or closed by hand.
- To re-engage the motor, turn the knob back to its original position and remove the key.
5. Entretien
Regular maintenance ensures the longevity and reliable operation of your BFT ICARO Slide Gate Opener. Perform these checks periodically.
5.1 Contrôles mensuels
- Mouvement de la porte : Manually slide the gate to ensure it moves freely without excessive friction or binding.
- Dispositifs de sécurité: Test photocells and other safety sensors by obstructing their path during gate operation. The gate should stop or reverse.
- Matériel de montage : Inspect all mounting bolts and fasteners for tightness.
5.2 Bi-Annual Checks (Recommended by Qualified Technician)
- Lubrification: Lubricate the gate wheels, bearings, and any moving parts of the gate itself. The opener's internal gears are typically self-lubricating.
- Connexions électriques : Inspect all wiring for signs of wear, corrosion, or loose connections.
- Interrupteurs de fin de course : Verify the proper functioning and adjustment of the electromechanical limit switches.
- D-Track System: A technician can verify the optimal performance of the D-Track torque management system.
Note: Always disconnect power before performing any maintenance that requires opening the opener's casing.
6. Dépannage
This section provides solutions to common issues you might encounter. For more complex problems, contact a qualified technician.
| Problème | Cause possible | Solution |
|---|---|---|
| Le portail ne bouge pas. | No power; Safety device activated; Manual release engaged; Remote battery dead. | Check power supply and circuit breaker; Inspect safety sensors for obstructions; Disengage manual release; Replace remote battery. |
| La porte s'arrête inopinément. | Obstruction detected by safety device; Motor overload; Limit switch issue. | Clear obstructions; Check gate for free movement; Consult technician for motor or limit switch issues. |
| La télécommande ne fonctionne pas. | Dead battery; Out of range; Remote not programmed. | Replace battery; Move closer to the receiver; Refer to programming instructions for your remote. |
| Le portail s'ouvre/se ferme partiellement. | Limit switches misaligned; Obstruction. | Check for obstructions; Re-adjust limit switches (refer to setup section or technician). |
7. Spécifications techniques
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | BFT-ICARO-SLIDE-GATE-OPENER-EM |
| Panneau de contrôle | LEO B CBB (incorporated) |
| Type d'opérateur | Irréversible |
| Alimentation électrique | 230 V, 60 Hz single-phase |
| Pouvoir absorbé | 1 ch (750 W) |
| Protection thermique | Intégré |
| Pinion Pitch | 4 mm (25 dents) |
| Leaf Speed | 7.9 pouces par seconde |
| Output Rotational Speed | 37 tr/min |
| Impact Reaction | Electronic clutch with encoder (D-Track) |
| Interrupteurs de fin de course | Électromécanique |
| Libération manuelle | Mechanical release with knob |
| Cycle de fonctionnement | Utilisation intensive |
| Conditions environnementales | 5°F à 140°F (-15°C à 60°C) |
| Degré de protection | IP24 |
| Poids de l'opérateur | 56 livres (25.4 kg) |
| Fréquence d'utilisation | Very intensive |
8. Garantie et assistance
8.1 Informations sur la garantie
For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official BFT website. La garantie couvre généralement les défauts de matériaux et de fabrication dans des conditions normales d'utilisation pendant une période déterminée à compter de la date d'achat.
Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.
8.2 Assistance technique
If you encounter issues that cannot be resolved using the troubleshooting guide, or require professional assistance, please contact your authorized BFT dealer or the manufacturer's technical support department.
Fabricant: BFT
Please have your model number (BFT-ICARO-SLIDE-GATE-OPENER-EM) and purchase date ready when contacting support.