Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Fluance RT81 Elite High Fidelity Vinyl Turntable. Please read this manual thoroughly before using your turntable to ensure proper function and longevity.
The Fluance RT81 is designed to deliver a pure analog listening experience with premium components, including an Audio Technica AT95E cartridge, a belt-drive system, and a high-mass MDF wood plinth for superior vibration isolation.
Ce qui est inclus
Vérifiez que tous les composants sont présents dans l'emballage :
- RT81 Turntable Unit
- Cache-poussière
- Adaptateur 45
- Tapis de plateau en caoutchouc
- Câble RCA de 3 m avec fil de terre
- 100V - 240V (50/60Hz) AC Power Adapter
- Guide de démarrage rapide
- Audio Technica AT95E Cartridge (pre-installed on headshell)
- Contrepoids
- Hinges (x2)
- Courroie en caoutchouc
Image: All components included with the Fluance RT81 turntable, including the plinth, aluminum platter, platter mat, headshell & AT95E cartridge, dust cover, hinges, RCA cable, 45 adapter, counterweight, 5ft power adapter, and rubber belt.
Installation
1. Déballage et placement
Carefully remove all components from the packaging. Place the turntable on a stable, level surface away from direct sunlight, heat sources, and excessive vibration.
Image: The Fluance RT81 turntable in its walnut finish, with the clear dust cover open, showcasing le plateau et le bras de lecture.
2. Installation du plateau et de la courroie
- Placez le plateau en aluminium sur la broche.
- Carefully loop the rubber belt around the motor pulley and the inner rim of the platter. Ensure the belt is not twisted.
- Place the rubber platter mat on top of the aluminum platter.
Image : Un gros plan view of the Fluance RT81 turntable's tonearm, highlighting the Audio Technica AT95E cartridge with its green stylus.
3. Configuration du bras de lecture
The Audio Technica AT95E cartridge is pre-installed on the headshell. You will need to balance the tonearm and set the tracking force.
- Fixez le contrepoids à l’arrière du bras de lecture.
- Adjust the counterweight until the tonearm is balanced and floats horizontally.
- Set the tracking force to the recommended 2.0 grams by rotating the counterweight.
- Set the anti-skating control to '2' to match the tracking force.
4. Connexion au système audio
The RT81 features a built-in Texas Instruments preamp, offering flexibility in connection options.
- Using Built-in Preamp: Set the PHONO/LINE switch on the back of the turntable to DOUBLER. Connect the RCA cables from the turntable's AUDIO OUTPUT to any available line-level input (e.g., AUX, CD) on your amplifier or powered speakers. The ground wire is not needed in this configuration.
- Using External Preamp: Set the PHONO/LINE switch on the back of the turntable to phono. Connect the RCA cables from the turntable's AUDIO OUTPUT to the PHONO input on your external preamp or receiver. Connect the ground wire from the turntable's ground post to the ground terminal on your external preamp/receveur.
Image: Rear panel of the Fluance RT81 turntable, displaying the RCA audio output jacks, ground terminal, PHONO/LINE switch, AUTO STOP switch, and DC 12V power input.
5. Connexion électrique
Connect the AC power adapter to the DC 12V input on the back of the turntable, then plug it into a wall outlet.
Mode d'emploi
1. Lecture d'un disque
- Place a record on the platter mat. For 7-inch singles, use the included 45 adapter.
- Select the appropriate speed (33 or 45 RPM) using the selector dial on the front left.
- Soulevez le bras de lecture à l'aide du levier de levage.
- Positionnez manuellement le bras de lecture au-dessus du sillon de départ souhaité du disque.
- Abaissez lentement le bras de lecture à l'aide du levier de levage. Le disque commencera à jouer.
2. Auto Stop Function
The RT81 features an auto-stop function. When enabled (AUTO STOP switch set to ON), the platter will automatically stop spinning once the tonearm reaches the end of the record. If disabled (AUTO STOP switch set to OFF), the platter will continue to spin until manually stopped.
Video: A demonstration of the Fluance RT81 turntable in operation, showcasing the automatic stop feature at the end of a record. This video is provided by Shoptronics, a seller of the product.
3. Arrêt de la lecture
- Soulevez le bras de lecture à l'aide du levier de levage.
- Remettez le bras de lecture sur son support.
- Turn the speed selector dial to "OFF" to stop the platter.
Entretien
1. Nettoyage du plateau tournant
Regular cleaning will help maintain the performance and appearance of your RT81.
- Use a soft, dry cloth to wipe the plinth and dust cover. Avoid abrasive cleaners.
- Gently brush the stylus with a soft brush in a back-to-front motion to remove dust.
- Clean records regularly with a carbon fiber brush or record cleaning solution to prevent dust buildup and improve sound quality.
2. Remplacement de la courroie
The drive belt may need replacement over time due to wear. Refer to the "What's Included" section for the location of the belt and instructions for re-installation.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Pas de son | Incorrect PHONO/LINE switch setting; loose RCA connections; amplifier/speaker issues. | Ensure PHONO/LINE switch is set correctly (LINE for built-in preamp, PHONO for external). Check all cable connections. Verify ampL'amplificateur/les haut-parleurs sont allumés et réglés sur l'entrée appropriée. |
| Son déformé | Incorrect tracking force; dirty stylus; damaged record. | Re-balance tonearm and set tracking force to 2.0g. Clean the stylus. Inspect record for damage. |
| Le plateau ne tourne pas | Power not connected; belt dislodged; AUTO STOP engaged and tonearm not moved. | Check power connection. Re-seat the drive belt. Move tonearm over platter or disable AUTO STOP. |
| Bruit de bourdonnement | Ground wire not connected (if using external preamp); interference. | Ensure ground wire is securely connected (if PHONO mode). Move turntable away from other electronic devices. |
Caractéristiques
- Modèle: RT81 Elite
- Marque: Fluance
- Dimensions (L x l x H) : 13.75 x 16.5 x 5.5 pouces
- Poids de l'article : 14.1 livres
- Matériau du socle : Bois MDF
- Plat: Aluminium
- Cartouche: Audio Technica AT95E (Elliptical Stylus)
- Système d'entraînement : Courroie Gates
- Vitesses : 33 1/3, 45 tr/min
- Préamp: Built-in Texas Instruments Preamp (switchable PHONO/LINE)
- Connectivité : Wired RCA Output with Ground Terminal
- Arrêt automatique : Yes (switchable ON/OFF)
- Couleur: Noyer
Image : Vue aérienne view of the Fluance RT81 turntable with a record spinning, demonstrating its operational state.
Garantie et assistance
Your Fluance RT81 turntable comes with a Garantie constructeur de 2 ans. For warranty claims or technical support, please contact Fluance customer service directly.
Assistance client à vie is also provided by Fluance to assist with any questions or issues you may encounter with your turntable.
For additional resources, including detailed setup videos and FAQs, please visit the official Fluance webconsultez le site ou reportez-vous au guide de démarrage rapide inclus.
Image: The Fluance company logo, "FLUANCE. Serious Performance."
