Linksys CM3008

Linksys CM3008 DOCSIS 3.0 Cable Modem User Manual

Introduction

The Linksys CM3008 Cable Modem provides stable, high-speed internet connectivity for your home or office. This modem is certified for DOCSIS 3.0 and is compatible with major cable providers such as Comcast Xfinity, Spectrum, and Cox. It features 8 download and 4 upload bonded channels, designed to optimize your existing cable broadband connection. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your CM3008 cable modem.

Linksys CM3008 Cable Modem front view

Devant view of the Linksys CM3008 Cable Modem, showing its compact design and LED indicators.

Contenu du colis

Vérifiez que votre colis contient les éléments suivants :

Physical Features and Indicators

The CM3008 modem features several LED indicators on the front panel to display its operational status, and various ports on the rear for connectivity.

LED du panneau avant

Linksys CM3008 Cable Modem angled view avec indicateurs LED

Incliné view of the CM3008, highlighting the LED indicators on the front panel.

Ports du panneau arrière

Linksys CM3008 Cable Modem rear view avec ports

Arrière view of the CM3008, showing the power input, Ethernet port, and coaxial cable input.

Instructions d'installation

Follow these steps to set up your Linksys CM3008 Cable Modem:

  1. Connectez le câble coaxial : Connect one end of a coaxial cable (not included) to the cable wall outlet and the other end to the Coaxial Cable Input on the rear of your CM3008 modem.
  2. Connectez le câble Ethernet : Connect one end of the included Ethernet cable to the Ethernet Port on the rear of your CM3008 modem. Connect the other end to your computer's Ethernet port or to the WAN/Internet port of your Wi-Fi router.
  3. Connectez l'adaptateur secteur : Plug the included AC power adapter into the 12VDC Power Input on the rear of your CM3008 modem, then plug the other end into a power outlet. The Power LED on the front panel should illuminate.
  4. Wait for Modem to Boot: Allow the modem several minutes to power on and establish a connection. The Downstream, Upstream, and Internet LEDs should eventually turn solid green.
  5. Activez votre service : Contact your cable broadband provider (e.g., Comcast Xfinity, Spectrum, Cox) to activate your new modem. You will need to provide them with the modem's MAC address, which is typically found on a label on the bottom or back of the device.
Diagram showing easy setup steps for Linksys CM3008 Cable Modem

Visual guide for connecting the CM3008 to power, cable outlet, and a computer or router.

Opération

Once your Linksys CM3008 Cable Modem is successfully set up and activated, it will operate continuously to provide internet access. The front panel LEDs serve as indicators of the modem's status:

For optimal performance, ensure the modem is placed in an open area with good ventilation and away from other electronic devices that may cause interference.

Entretien

Proper maintenance helps ensure the longevity and optimal performance of your CM3008 cable modem:

Dépannage

If you encounter issues with your Linksys CM3008 Cable Modem, try the following troubleshooting steps:

Caractéristiques

MarqueLinksys
Numéro de modèleCM3008
Technologie de connectivitéCâble
Norme DOCSISDOCSIS 3.0
Chaînes8 en aval x 4 en amont
Compatible Internet Service ProvidersComcast Xfinity, Spectrum, Cox, Time Warner Cable, Charter, Cablevision
Appareils compatiblesRouter, PC, Mac
Dimensions (L x l x H)0.98 x 3.94 x 2.76 pouces
Poids de l'article3.52 onces

Garantie et assistance

The Linksys CM3008 Cable Modem comes with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included in your product packaging or visit the official Linksys website.

For technical support, product registration, and additional resources, please visit the official Linksys support website: www.linksys.com/support.

Documents connexes - CM3008

Préview Guide de l'utilisateur du modem câble Linksys DPC3008/EPC3008
Guide de l'utilisateur du modem câble Linksys DPC3008/EPC3008, fournissant des instructions pour l'installation, la configuration, le fonctionnement, la maintenance et le dépannage.
Préview Guide de l'utilisateur du routeur modem ADSL2+ sans fil Linksys
Ce guide de l'utilisateur fournit des instructions et des spécifications complètes pour le routeur modem ADSL2+ sans fil Linksys (modèles : WAG54G2, WAG160N v2), couvrant l'installation, la configuration, le dépannage et les informations réglementaires.
Préview Guide de dépannage du Linksys EA7300
Trouvez des solutions aux problèmes courants avec votre routeur Wi-Fi Linksys EA7300, notamment la réinitialisation des paramètres par défaut, les problèmes de connectivité et les performances lentes.
Préview Comment identifier les nœuds du système Linksys Velop à l'aide de l'application Linksys
Découvrez comment identifier facilement vos nœuds Linksys Velop au sein de votre réseau domestique grâce à l'application intuitive Linksys. Ce guide fournit des instructions étape par étape pour localiser et gérer les composants de votre système Wi-Fi maillé.
Préview Linksys LAPAX3600C : Point d'accès Wi-Fi 6 d'intérieur géré dans le cloud pour les entreprises
Détaillé surview Le Linksys LAPAX3600C est un point d'accès Wi-Fi 6 double bande d'intérieur (802.11ax) géré par le cloud. Il offre des débits AX3600, des antennes 4x4, la technologie PoE+ et Linksys Cloud Manager 2.0 pour une gestion simplifiée du réseau d'entreprise.
Préview Guide de l'utilisateur du routeur Gigabit Linksys EA8500 AC2600 MU-MIMO
Guide de l'utilisateur du routeur Gigabit MU-MIMO AC2600 Linksys EA8500, couvrant le produitview, instructions d'installation, dépannage des problèmes courants et spécifications techniques.