Produit terminéview
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Respekta Black Glass Sink 100cm, model NEWYORK100X50S. This kitchen sink features two stainless steel basins and an integrated black glass draining board, designed for reversible installation in a 60 cm under-cabinet space.
Dans l'ensemble view of the Respekta Black Glass Sink, showing the two stainless steel basins and the integrated black glass draining board.
Consignes de sécurité
- Manipulez toujours les composants en verre avec précaution afin d'éviter toute casse.
- Portez un équipement de protection individuelle (EPI) approprié, tel que des gants et des lunettes de sécurité, lors de l'installation.
- Assurez-vous que tous les raccords de plomberie sont bien fixés et étanches afin d'éviter les fuites.
- Do not place excessively heavy objects on the glass draining board. The maximum weight load is 100 kg.
- Avoid sudden temperature changes on the glass surface, although it is temperature resistant up to 180 °C.
- Gardez les produits de nettoyage hors de portée des enfants.
Contenu du colis
- Respekta Black Glass Sink (100cm)
- Valve de panier
- Raccord excentré
- Drain and Overflow Fitting
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Marque | Respect |
| Numéro de modèle | NEWYORK100X50S |
| Couleur | Noir |
| Matériel | Glass (ESG, 8 mm thickness), Steel (304, 1 mm thickness) |
| Taille | us4/100cm |
| Dimensions du produit (H x L x P) | 21 cm x 100 cm x 50 cm (8.27 po H x 39.37 po L x 19.69 po P) |
| Basin Profondeur | 210 mm / 140 mm |
| Type d'installation | Drop In, Reversible |
| Taille minimale de l'armoire | 60 cm |
| Tapez les trous | 2 (punched) |
| Type de drain | Surgir |
| Résistance à la température | Jusqu'à 180 °C |
| Max. Weight Load (Glass) | 100 kg |
| Poids de l'article | 9 kg (19.8 livres) |
Installation
Liste de contrôle avant l'installation
- Vérifiez que tout le contenu du colis est présent et intact.
- Ensure the countertop opening matches the cut-out dimensions (approximately 61.8 cm x 47 cm).
- Confirm adequate space for a 60 cm under-cabinet installation.
- Gather necessary tools (e.g., sealant, screwdriver, wrench, measuring tape).
The Respekta Black Glass Sink installed in a kitchen countertop, featuring a faucet and showing the two basins and draining area.
Étapes d'installation
- Préparer le plan de travail : Carefully cut the opening in your countertop according to the specified dimensions. Ensure edges are smooth and clean.
- Positionnez l'évier : Place the Respekta Black Glass Sink into the prepared opening. The sink is designed for reversible installation, allowing you to choose the orientation of the basins and draining board.
- Sécurisez l'évier : Use appropriate clips or fasteners (not explicitly listed but standard for drop-in sinks) to secure the sink to the countertop. Apply a silicone sealant around the perimeter of the sink to create a watertight seal.
- Installer le robinet : Mount your kitchen faucet into one of the two pre-punched tap holes. Secure it according to the faucet manufacturer's instructions.
- Install Drain and Overflow Fittings: Assemble and install the basket valve, excenter fitting, and the drain and overflow fitting into the sink basins. Ensure all connections are tightened properly to prevent leaks.
- Connecter la plomberie : Connect the faucet water supply lines and the drain assembly to your household plumbing. Test for leaks by running water through the faucet and checking all connections.
Dessous view of the Respekta Black Glass Sink, illustrating the stainless steel basin construction and the connection points for plumbing.
Note: Professional installation is recommended for optimal results and to ensure compliance with local plumbing codes.
Opération
The Respekta Black Glass Sink is designed for standard kitchen use. The two basins allow for versatile tasks such as washing dishes in one basin and rinsing in the other. The integrated draining board provides a convenient area for drying dishes or preparing food.
- Débit d'eau : Use your installed faucet to control water flow and temperature.
- Drainage: The basket valve in each basin helps to catch food debris, preventing clogs. The excenter fitting allows for remote control of the main drain plug.
- Draining Board: Utilize the glass draining board for air-drying dishes, fruits, or vegetables.
Détaillé view of the basket valve in one of the stainless steel basins, designed for efficient drainage and debris collection.
Close-up of the excenter fitting control knob, located on the black glass surface next to the basins.
Entretien et soins
Proper care will ensure the longevity and appearance of your Respekta Black Glass Sink.
- Nettoyage quotidien : After each use, wipe the sink surfaces (glass and stainless steel) with a soft, damp cloth and mild dish soap. Rinse thoroughly with clean water.
- Séchage: As per product instructions, wipe with a dry cloth to prevent water spots and streaks, especially on the black glass surface.
- Détachage: For stubborn stains on stainless steel, use a non-abrasive stainless steel cleaner. For glass, use a glass cleaner. Always follow the cleaner manufacturer's instructions.
- Évitez les abrasifs : Do not use abrasive cleaners, scouring pads, or harsh chemicals (e.g., bleach, ammonia-based cleaners) on either the glass or stainless steel surfaces, as these can cause scratches or damage.
- Prévenir les rayures : Avoid dragging heavy or sharp objects across the glass draining board.
- Entretien des canalisations : Regularly clean the basket valves to remove accumulated food debris and prevent blockages.
Dépannage
Cette section aborde les problèmes courants que vous pourriez rencontrer avec votre évier.
| Problème | Cause possible | Solution |
|---|---|---|
| Water leaks around the sink edge | Inadequate sealant or improper installation. | Check the silicone seal around the sink. Reapply sealant if necessary. Ensure mounting clips are secure. |
| Écoulement lent ou obstruction | Accumulation of food debris in the basket valve or drain pipe. | Remove and clean the basket valve. Use a drain cleaner or plumbing snake for deeper blockages. Avoid pouring grease down the drain. |
| Water spots or streaks on glass | Hard water residue or improper drying. | Wipe the glass surface dry immediately after use. Use a glass cleaner or a vinegar solution for hard water spots. |
| Scratches on stainless steel | Abrasive cleaning or contact with sharp objects. | Use non-abrasive cleaners and soft cloths. Minor scratches may be buffed out with specialized stainless steel scratch removal kits (follow product instructions carefully). |
Garantie et assistance
For warranty information and customer support regarding your Respekta Black Glass Sink, please refer to the documentation provided at the time of purchase or contact your retailer. You may also visit the official Respekta website pour une assistance supplémentaire.
Veuillez conserver votre preuve d'achat pour les réclamations au titre de la garantie.
