1. Introduction
The AJA V2Analog is a compact, high-quality mini-converter designed to convert HD/SD-SDI signals to analog component or composite video. This device is engineered for professional video workflows, providing reliable signal conversion for various applications.
Its versatility allows for complete integration into any workflow, making it a valuable asset in any video production environment.
Figure 1 : Avant et côté view of the AJA V2Analog Mini-Converter, highlighting input and output ports.
2. Consignes de sécurité
Veuillez lire attentivement toutes les consignes de sécurité avant d'utiliser l'appareil. Conservez ce manuel pour toute consultation ultérieure.
- N’exposez pas l’appareil à la pluie, à l’humidité ou à des températures extrêmes.
- Assurer une ventilation adéquate pour éviter la surchauffe.
- Use only the specified power supply (5-20 VDC).
- Évitez de faire tomber l'appareil ou de le soumettre à des chocs violents.
- Confiez toute intervention d'entretien à un personnel qualifié.
3. Installation et connexions
Follow these steps to set up your AJA V2Analog converter:
- Connexion électrique : Connect the appropriate power supply (5-20 VDC) to the "POWER" input on the converter.
- Entrée SDI : Connect your HD/SD-SDI source to the "SDI IN" BNC connector.
- Sortie analogique : Connect the Y/G, Pb/B, and Pr/R BNC outputs to your analog component or composite display/device. Ensure correct color component matching (Y/G for Luminance/Green, Pb/B for Blue Difference, Pr/R for Red Difference).
- Connexion USB (en option) : For firmware updates or configuration, connect a USB cable from the "USB" port on the converter to your computer.
Figure 2 : Haut view of the AJA V2Analog Mini-Converter, illustrating port labels for connection.
4. Mode d'emploi
Once all connections are made, power on the device. The V2Analog will automatically detect the incoming SDI signal format and convert it to the appropriate analog output. The "LOCK" LED indicator will illuminate when a stable SDI signal is detected and locked.
4.1. Signal Compatibility
The V2Analog supports various HD and SD SDI formats. It is designed to convert these digital signals to standard analog component (YPbPr) or composite (CVBS) outputs.
4.2. Configuration (Advanced)
Advanced configuration options, such as output format selection or color space adjustments, may be available via AJA's Mini-Config software, accessible through the USB port. Refer to the AJA website for the latest software and detailed configuration guides.
5. Entretien
The AJA V2Analog is designed for reliable operation with minimal maintenance. Follow these guidelines:
- Nettoyage: Utilisez un chiffon doux et sec pour nettoyer l'extérieur de l'appareil. N'utilisez pas de nettoyants liquides ni en aérosol.
- Mises à jour du micrologiciel : Periodically check the AJA website for firmware updates. Keeping the firmware current ensures optimal performance and compatibility.
- Stockage: Lorsqu'il n'est pas utilisé pendant une période prolongée, rangez l'appareil dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes.
6. Dépannage
If you encounter issues with your V2Analog, refer to the following common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| Pas de sortie vidéo | No power; Incorrect SDI input; Incorrect analog output connection; No signal lock. | Check power supply; Verify SDI source is active and connected to "SDI IN"; Ensure Y/G, Pb/B, Pr/R are connected correctly to display; Check "LOCK" LED. |
| Distorted or colored video | Incorrect analog output format; Loose connections. | Ensure display is set to correct input type (component/composite); Tighten all BNC connections. |
| "LOCK" LED not illuminated | No valid SDI input signal. | Verify SDI source is active and sending a compatible signal. Check SDI cable integrity. |
If the problem persists, contact AJA Technical Support for further assistance.
7. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Modèle | V2ANALOG |
| Marque | AJA |
| Saisir | HD/SD-SDI (BNC) |
| Sortir | Component (Y/G, Pb/B, Pr/R BNC), Composite (selectable) |
| Type d'interface | USB, SDI, Component |
| Pouvoir | 5-20 VCC |
| Dimensions (L x l x H) | 7.2 x 5.7 x 4.2 pouces |
| Poids | 1.35 livres |
| Code UPC | 091131246023 |
8. Assistance et garantie
For technical support, product registration, or warranty information, please visit the official AJA website or contact their customer service department. Specific warranty terms and conditions may vary by region and purchase date.
AJA Website: Www.aja.com
