Produit terminéview
This manual provides detailed instructions for the installation, operation, and maintenance of your Winjet CTWJ-0043-BC Altezza Tail Lights, designed specifically for the Nissan Frontier 1998-2004 models. These tail lights are engineered to provide enhanced visibility and a modern aesthetic for your vehicle, ensuring compliance with SAE/DOT standards for street use.
Caractéristiques principales :
- Completed set includes Left and Right Sides.
- SAE/DOT Compliance for street use, ensuring legal and safe operation.
- Constructed from High Quality OEM Grade ABS Plastic for durability.
- Designed for bolt-on installation, requiring no modification for a plug-and-play setup.
- Conception étanche pour des performances fiables dans diverses conditions météorologiques.
Compatibilité
These tail lights are compatible with the following vehicle model:
- Nissan Frontier: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Figure 1 : Automotive Fitment Guide. This image illustrates the compatible vehicle model, the Nissan Frontier from 1998 to 2004, ensuring proper fitment for the tail light assembly.
Configuration et installation
The Winjet Altezza Tail Lights are designed for a straightforward, bolt-on installation process. No complex wiring or vehicle modifications are typically required.
Outils requis :
- Basic hand tools (e.g., socket wrench, screwdriver) as needed for existing tail light removal.
Étapes d'installation :
- Préparation: Ensure the vehicle's ignition is off and the parking brake is engaged. For safety, disconnect the negative terminal of the vehicle's battery.
- Remove Old Tail Lights: Locate and remove the screws or fasteners holding the existing tail light assembly in place. Carefully pull the assembly away from the vehicle body.
- Déconnecter le câblage : Disconnect the electrical harness from the old tail light assembly. Note the position of each bulb (running lights, turn signals, reverse lights) if you need to transfer them.
- Transfer Bulbs (if applicable): If your new Winjet tail lights do not come with pre-installed bulbs, carefully transfer the bulbs from your original tail light assembly to the corresponding sockets on the new Winjet assembly. Ensure a secure fit.
- Connect New Tail Lights: Connect the vehicle's electrical harness to the new Winjet tail light assembly. The design ensures the same harness can be used without rewiring.
- Mount New Tail Lights: Align the new tail light assembly with the mounting points on the vehicle body. Secure it in place using the original screws or fasteners. Ensure a snug fit to prevent moisture ingress.
- Fonctionnalité de test : Reconnect the vehicle's battery. Test all light functions: running lights, brake lights, turn signals, and reverse lights, to ensure proper operation before driving.
Figure 2 : Installation Features. This image highlights the "Same Harness | No Rewiring" feature, showing standard light bulbs, and the "Factory Bolt-On Fitment" with a close-up of a mounting bolt, simplifying the installation process.
Mode d'emploi
Once installed, the Winjet Altezza Tail Lights operate in conjunction with your vehicle's existing electrical system. They are designed to function automatically when the vehicle's lighting controls are activated.
Fonctions d'éclairage :
- Feux de position : Illuminate when the vehicle's headlights or parking lights are on, providing rear visibility.
- Clignotants : Flash when the turn signal lever is activated, indicating a change in direction.
- Feux de freinage : Illuminate brightly when the brake pedal is pressed, signaling deceleration or stopping.
- Feux de recul : Illuminate when the vehicle is shifted into reverse gear, providing illumination and warning to others.
Figure 3 : Tail Light Functions. This diagram clearly labels the positions of the Running Lights, Turn Signals, and Reverse Lights within the tail light assembly, illustrating their respective functions.
Entretien
To ensure the longevity and optimal performance of your Winjet Altezza Tail Lights, follow these simple maintenance guidelines:
- Nettoyage régulier : Clean the outer lens with a soft cloth and mild automotive soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the lens.
- Inspecter les dommages : Periodically check the tail light assemblies for any cracks, moisture inside the lens, or loose connections. Address any issues promptly.
- Remplacement de l'ampoule : If a bulb burns out (for models using replaceable bulbs), replace it with the correct type and wattage as specified by your vehicle's manufacturer or the original bulb. Ensure the replacement bulb is securely seated.
- Inspection du câblage : Occasionally inspect the wiring harness for any signs of wear, fraying, or corrosion.
Dépannage
If you encounter issues with your Winjet Altezza Tail Lights, refer to the following common troubleshooting steps:
| Problème | Cause possible | Solution |
|---|---|---|
| Les lumières ne s'allument pas | Blown fuse, faulty bulb, loose connection, damaged wiring. | Check vehicle's fuse box and replace any blown fuses. Inspect bulbs and replace if necessary. Ensure all electrical connections are secure. Check wiring for damage. |
| Lumières vacillantes ou faibles | Loose connection, corroded terminals, low voltage. | Secure all connections. Clean any corroded terminals. Check vehicle's battery and charging system. |
| Humidité à l'intérieur de la lentille | Mauvaise étanchéité, condensation. | Ensure the tail light assembly is properly seated and sealed against the vehicle body. Small amounts of condensation may dissipate naturally; persistent moisture indicates a seal issue. |
| Turn signals flash rapidly | Burnt out turn signal bulb, incorrect bulb type. | Check and replace the turn signal bulb. Ensure the correct wattage bulb is used. |
If the problem persists after attempting these solutions, it is recommended to consult a qualified automotive technician.
Caractéristiques
| Attribut | Détail |
|---|---|
| Marque | Winjet |
| Numéro de modèle | CTWJ-0043-BC |
| Dimensions du produit (L x l x H) | 43.18 x 33.02 x 22.86 cm (17 x 13 x 9 pouces) |
| Poids de l'article | 1.81 kg (4 lb) |
| Finition extérieure | Usiné |
| Numéro de pièce du fabricant | WJ20-0043-04 |
| Position | Left (Set includes Left and Right) |
| Type d'ampoule | DIRIGÉ |
| Type de source lumineuse | DIRIGÉ |
| Caractéristiques spéciales | Étanche |
| Utilisations spécifiques | Feux arrière |
| Type de service de véhicule | Voiture |
| Couleur des verres | Clair |
| Overall Color | Noir/Transparent |
| Code UPC | 848524017964, 728276482633, 848524062841, 848063040430 |
Informations sur la garantie
Winjet provides a Garantie de 12 mois Cette garantie couvre les défauts de fabrication et assure le bon fonctionnement du produit dans des conditions normales d'utilisation. Veuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.
For specific terms and conditions of the warranty, please refer to the official Winjet website ou contacter le support client.
Assistance clientèle
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Winjet customer support through their official channels. Refer to the Winjet website pour les informations de contact les plus récentes.
Fabricant: Winjet
Website: www.winjetinc.com
ASIN: B01A1500AI
Date de mise en ligne sur Amazon : 24er mars 2016
