Introduction
This manual provides essential information for the safe and effective use of your BESTEK 6-Outlet Surge Protector Power Strip, Model BJ6005-FBA. Please read these instructions carefully before use and retain them for future reference. This power strip is designed to provide additional power outlets and basic surge protection for your electronic devices.
Consignes de sécurité importantes
Pour réduire les risques d'électrocution, d'incendie ou de blessure, suivez toujours ces précautions de sécurité de base :
- Do not exceed the electrical ratings of 15A, 1875W, and 125V.
- Ne pas utiliser dans des environnements humides ou à proximité de l'eau.
- Ne pas utiliser avec des aquariums ou d'autres produits liés à l'eau.
- Do not use with extension cords that are not grounded.
- Ne pas démonter ni modifier l'appareil.
- Ensure the power strip is plugged into a properly grounded outlet.
- Keep children away from the power strip and connected devices.
- Unplug the power strip from the wall outlet when not in use or before cleaning.
Caractéristiques du produit
The BESTEK 6-Outlet Surge Protector Power Strip offers the following features:
- 6 prises CA : Fournit de l'énergie à plusieurs appareils électroniques.
- Protection contre les surtensions de 200 joules : Offers basic protection against power surges for small appliances, phones, and lamps.
- Intégré 15-Amp Disjoncteur: Protects against overload, overheating, and short circuits.
- Lighted Power Switch: Indicates when the power strip is active and allows for easy control.
- 6-Foot 14 AWG Power Cord: Durable and long enough for flexible placement.
- Fiche plate à angle droit : Designed to fit in tight spaces and keep cords close to the wall.
- Keyhole Mounting Tabs: For secure installation on walls or under desks.
- Conception mince : Reduces clutter and fits easily in various environments.
- Detachable Velcro Cord Management: Helps keep the power cord organized.
- Listé ETL : Certifié selon les normes de sécurité et de qualité.
Image: The power strip illustrating its multiple safety protections including overload, over current, over voltage, high temperature, and short circuit protection. A phone is shown charging from one of the outlets.
Image: The power strip with its dimensions (10.83 inches long, 1.76 inches wide, 1.18 inches thick), highlighting its slim and sleek design.
Image : Une explosion view of the power strip, revealing its internal structure with phosphor bronze conductors, a 15A overload protection switch, and UL94V-0 flame-retardant alloy plastic casing.
Image: A close-up of the power cord, emphasizing the UL Certified SJT 3x14AWG strong copper wire, designed for efficient electricity conduction with low loss and heat.
Installation
- Déballer: Retirez délicatement la multiprise de son emballage.
- Placement: Position the power strip in a dry indoor location, away from heat sources and direct sunlight. Ensure the 6-foot cord can reach a wall outlet without being stretched or obstructed.
- Montage (en option) : If desired, use the keyhole mounting tabs on the back of the power strip to secure it to a wall or desk surface using appropriate screws (not included).
- Brancher: Insert the power strip's right-angle flat plug into a standard 3-prong, 125V AC grounded wall outlet.
- Connecter des appareils : Plug your electronic devices into the 6 AC outlets on the power strip. Ensure the total power consumption of all connected devices does not exceed 1875W.
Image: The power strip positioned on a wooden table, with a phone charging and a small plant, demonstrating a typical setup.
Image : Un collage de gros plans views showing the lighted power switch with reset button, the right-angle flat plug, the wide-spaced AC outlets, and the keyhole mounting tabs on the back of the unit.
Mode d'emploi
- Marche/Arrêt : Press the red lighted power switch to turn the power strip on or off. When the switch is illuminated, power is supplied to the outlets.
- Protection contre les surtensions : The power strip provides basic surge protection. In the event of a power surge, the internal components are designed to absorb excess voltage pour protéger les appareils connectés.
- Protection contre les surcharges : The integrated 15-Amp circuit breaker will automatically trip (turn off) if the total current draw from connected devices exceeds 15 Amps (1875 Watts). This prevents overheating and potential damage.
Entretien
- Nettoyage: Débranchez la multiprise de la prise murale avant de la nettoyer. Utilisez un chiffon doux et sec pour essuyer l'extérieur. N'utilisez pas de nettoyants liquides ni d'aérosols.
- Gestion du cordon: Use the included detachable Velcro strap to keep the power cord neatly organized when not in full extension.
- Inspection: Periodically inspect the power strip and its cord for any signs of damage, such as frayed wires or cracked casing. En cas de dommages, cesser immédiatement l'utilisation.
Dépannage
- Absence de courant aux prises :
- Check if the power strip's lighted switch is ON.
- Assurez-vous que la multiprise est correctement branchée sur une prise murale en état de marche.
- If the switch is OFF and won't turn ON, the integrated 15-Amp circuit breaker may have tripped due to an overload. Unplug some devices, then press the switch to reset it.
- Check your home's circuit breaker panel to ensure the wall outlet's circuit has not tripped.
- Appareil ne chargeant/ne fonctionnant pas :
- Ensure the device is properly plugged into the power strip.
- Test the device by plugging it directly into a known working wall outlet.
- Verify the device's power cord is not damaged.
Caractéristiques
| Numéro de modèle | BJ6005-FBA |
| Marque | MEILLEURE |
| Nombre total de prises de courant | 6 |
| Voltage | 125 volts |
| Évaluation actuelle | 15 Amps |
| Puissance nominale | 1875 watts |
| Protection contre les surtensions | 200 joules |
| Longueur du cordon | 6 pieds |
| Type de prise | Fiche plate à angle droit |
| Dimensions du produit | 10.8 x 1.7 x 1.2 pouces |
| Poids de l'article | 1 livre |
| Dossier spécial | 20,000 Times of Outlets Plug & Play, PC+ABS UL94 V-0 Flame-resistant Material |
| Certifications | Répertorié ETL |
Image: The underside of the power strip, displaying the ETL Listed certification mark and keyhole mounting tabs.
Garantie et assistance
BESTEK provides an 18-month warranty for this product. For warranty claims, technical assistance, or customer service inquiries, please contact BESTEK customer support through their official website or the retailer where the product was purchased. Please have your model number (BJ6005-FBA) and purchase information ready when contacting support.
