KORG STB1-BK Digital Piano Stand Instruction Manual

Introduction

Merci pour votre achatasing the KORG STB1-BK Digital Piano Stand. This stand is specifically designed to complement your KORG B1 or B2+ Digital Piano, providing a stable and aesthetically pleasing support structure. It elevates your digital piano to a standard playing height, enhancing your musical experience. This manual provides essential information for safe assembly, proper use, and maintenance of your stand.

Consignes de sécurité

Lisez attentivement toutes les instructions avant le montage et l'utilisation.
Avant de commencer l'assemblage, assurez-vous que tous les composants sont présents et non endommagés.
Assemblez le support sur une surface douce et propre afin d'éviter les rayures.
Utilisez uniquement les pièces fournies pour l'assemblage.
Ne serrez pas trop les vis, car cela pourrait endommager le matériau.
Ensure the stand is placed on a level, stable surface before placing the digital piano on it.
Ne laissez pas les enfants grimper sur le support ou jouer avec.
Vérifiez régulièrement toutes les fixations pour vous assurer qu'elles restent bien serrées.

Contenu du colis

Veuillez vérifier que tous les composants suivants sont inclus dans votre colis :

Left Leg Panel (1)
Right Leg Panel (1)
Rear Cross Panel (1)
Mounting Screws (Quantity as specified in hardware pack)
Instructions de montage (Ce document)

Note: A cross-point (Phillips head) screwdriver is required for assembly and is not included.

Configuration et assemblage

Follow these steps to assemble your KORG STB1-BK Digital Piano Stand. It is recommended to have a second person assist during the final placement of the digital piano.

Déballer les composants : Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent damage. Identify the Left Leg Panel, Right Leg Panel, and Rear Cross Panel.
Attach Rear Cross Panel to Leg Panels: Align the pre-drilled holes on the ends of the Rear Cross Panel with the corresponding holes on the inner sides of the Left and Right Leg Panels. Use the provided mounting screws and a cross-point screwdriver to securely fasten the panels together. Ensure the stand forms a stable, rectangular structure. Do not overtighten.

Image: Illustration of the stand's components being assembled. The leg panels are connected by the rear cross panel, forming the base structure.
Positionnez le support : Once assembled, carefully lift the stand and place it in your desired location. Ensure the floor surface is level and stable to prevent wobbling.
Place the Digital Piano: With assistance, carefully lift your KORG B1 or B2+ Digital Piano and align it with the top edges of the assembled stand. Gently lower the piano onto the stand, ensuring it sits securely and evenly. The stand is designed to cradle the piano, providing a snug fit.

Image: The KORG STB1-BK stand fully assembled with a KORG digital piano placed on it, ready for use.

Mode d'emploi

The KORG STB1-BK stand is designed for passive support of your digital piano. Once assembled and the piano is placed, no further operational steps are required for the stand itself.

Ensure the digital piano is centered and stable on the stand before use.
Avoid leaning heavily on the stand or applying excessive force, as this may compromise stability.
If moving the piano and stand, always lift both components carefully, preferably with assistance, to prevent damage or injury.

Entretien

To ensure the longevity and appearance of your KORG STB1-BK Digital Piano Stand, follow these simple maintenance guidelines:

Nettoyage: Wipe the stand regularly with a soft, dry cloth to remove dust. For stubborn marks, a slightly damp Utilisez un chiffon imbibé de savon doux, puis séchez soigneusement. Évitez les nettoyants abrasifs et les solvants.
Vérification des fixations : Periodically (e.g., every 6 months) check all assembly screws to ensure they are still tight. Retighten if necessary, but do not overtighten.
Conditions environnementales : Avoid placing the stand in direct sunlight or near heat sources, as this can cause material degradation or discoloration. Maintain a stable room temperature and humidity.

Dépannage

If you encounter any issues with your KORG STB1-BK Digital Piano Stand, refer to the following common problems and solutions:

Problème	Cause possible	Solution
Stand wobbles after assembly.	Surface du sol inégale. Vis non complètement serrées. Components not aligned correctly during assembly.	Move the stand to a level surface or use shims under the legs if necessary. Vérifiez et resserrez toutes les vis de montage. Disassemble and reassemble, ensuring all parts are correctly aligned.
Screw does not go all the way in.	Misaligned screw hole. Cross-threaded screw. Obstruction in the hole.	Remove the screw, realign the components, and try again. Ensure the screw is inserted straight. If cross-threaded, try a different screw hole if available, or contact support. Check for any debris in the hole.
Digital piano does not sit securely on the stand.	Piano not centered. Stand not fully assembled or damaged. Incorrect piano model for the stand.	Adjust the piano's position until it is centered and stable. Inspect the stand for any loose connections or damage. Verify that your digital piano is a KORG B1 or B2+ model.

Caractéristiques

Modèle: STB1-BK
Couleur: Noir
Matériel: Bois
Dimensions du produit (L x l x H) : 51.65 x 13.23 x 24.92 pouces (131.2 x 33.6 x 63.3 cm)
Poids de l'article : 18.48 livres (8.4 kg)
Assemblage requis : Oui
Modèles compatibles : KORG B1, KORG B2+ Digital Pianos

Garantie et assistance

For warranty information and customer support, please refer to the warranty card included with your product or visit the official KORG website. If you require assistance with assembly, troubleshooting, or have questions about your STB1-BK Digital Piano Stand, please contact KORG customer service.

KORG Official Website: www.korg.com

	Guide de démarrage rapide du piano numérique Korg XE20/XE20SP Découvrez comment utiliser votre piano numérique d'ensemble Korg XE20/XE20SP. Ce guide de démarrage rapide couvre la configuration essentielle, les opérations de base, les fonctionnalités et les précautions à prendre pour un plaisir musical immédiat.
	Korg Liano LIVE! Manual del Usuario: Piano Digital para Transmisión en Directo Descubra cómo utilizar el Korg Liano LIVE!, un piano digital todo en uno diseñado para la transmisión en directo. Este manual del usuario proporciona instrucciones detalladas sobre sus funciones, conexiones y configuración.
	Manuel d'utilisation du piano numérique Korg SP-500 Explorez les fonctionnalités et le fonctionnement du piano numérique Korg SP-500 grâce à son manuel d'utilisation complet. Découvrez la sélection des sons, l'accompagnement automatique, l'enregistrement et bien plus encore.
	Manuel d'utilisation du piano numérique Korg XE20/XE20SP Manuel d'utilisation complet pour les pianos numériques d'ensemble Korg XE20 et XE20SP, couvrant l'installation, le fonctionnement, les styles, les morceaux, les réglages, les connexions et le dépannage.
	Korg C-303/C-505 Concert Piano Service Manual \| Technical Guide Comprehensive service manual for Korg C-303 and C-505 Concert Piano models. Includes specifications, circuit diagrams, parts lists, and maintenance information.
	KORG SGX-2 Collection: Owner's Manual Explore the KORG SGX-2, a premium grand piano software synthesizer from the KORG Collection. This comprehensive owner's manual guides you through installation, features, effects, MIDI control, and more for Mac and PC users, detailing its rich piano sounds and advanced capabilities.

KORG STB1-BK