Legrand 138074 Manual Call Point Instruction Manual

1. Produit terminéview

The Legrand 138074 is a manual call point designed for fire alarm systems. It features a white housing, two contacts, and an integrated LED indicator. This device allows for manual activation of a fire alarm in emergency situations, providing a clear visual and tactile indication of activation.

Figure 1 : Face avant view of the Legrand 138074 Manual Call Point.

2. Consignes de sécurité

Veuillez lire et comprendre toutes les consignes de sécurité avant d'installer ou d'utiliser cet appareil. Le non-respect de ces consignes peut entraîner des dommages matériels, des blessures, voire la mort.

• Installation professionnelle : Installation must be performed by qualified personnel in accordance with all local and national electrical codes and fire safety regulations.
• Coupure de courant : Always disconnect power to the circuit before performing any installation, maintenance, or troubleshooting.
• Voltage Vérifiez : Vérifiez que le volume d'alimentationtage correspond aux spécifications de l'appareil.
• Conditions environnementales : Ne pas installer dans des zones présentant une humidité excessive, des températures extrêmes ou des environnements corrosifs.
• Intégrité des composants : N'utilisez pas l'appareil si une pièce est endommagée.

3. Contenu du colis

Vérifiez que tous les composants sont présents et non endommagés à l'ouverture de l'emballage :

• Legrand 138074 Manual Call Point (1 unit)
• Vis de fixation (quantité fournie)
• Manuel d'instructions (ce document)

4. Configuration et installation

The Legrand 138074 Manual Call Point is designed for surface or flush mounting. Ensure the chosen location complies with local fire safety regulations regarding accessibility and visibility.

4.1. Montage

1. Préparez la surface de montage : Ensure the surface is clean, dry, and flat.
2. Points de forage marqués : Use the call point's base as a template to mark the positions for mounting screws.
3. Trous de forage : Drill pilot holes appropriate for the mounting screws.
4. Sécuriser la base : Attach the call point's base securely to the wall using the provided screws.

4.2. Câblage

Refer to the wiring diagram below and your fire alarm control panel's documentation for correct connection. This device features 2 contacts and an LED indicator.

• Connect the alarm circuit wires to the designated terminals (typically NO/NC contacts).
• Connect the LED indicator wires to the appropriate power source and signaling circuit as per your system's requirements.
• Assurez-vous que toutes les connexions sont sécurisées et correctement isolées.

Figure 2 : Interne view and wiring terminals of the Legrand 138074 Manual Call Point.

4.3. Assemblage final

1. Carefully place the front cover onto the mounted base, ensuring all wires are tucked away and not pinched.
2. Secure the cover with any retaining screws or clips provided.
3. Restore power to the circuit and test the device according to your fire alarm system's testing procedures.

5. Mode d'emploi

In the event of a fire or other emergency requiring immediate alarm activation:

1. Locate the Call Point: Identify the nearest Legrand 138074 Manual Call Point.
2. Activer l'alarme : Firmly press the designated activation area on the call point. This action will typically break a frangible element or activate a switch.
3. Vérifier l'activation : The integrated LED indicator should illuminate, confirming that the call point has been activated and the signal sent to the fire alarm control panel.
4. Évacuer: Follow your building's emergency evacuation procedures.

Note: Resetting the call point typically requires a special key or tool to return the activation mechanism to its original state after an alarm. Consult your fire alarm system administrator for reset procedures.

6. Entretien

Regular maintenance ensures the reliable operation of your manual call point.

• Inspection visuelle : Inspectez périodiquement le point d'appel pour détecter tout signe de dommage physique.ampering, or obstruction. Ensure the LED is functional during system tests.
• Nettoyage: Clean the exterior of the call point with a soft, damp chiffon. N'utilisez pas de nettoyants abrasifs ou de solvants.
• Tests fonctionnels : Conduct regular functional tests as required by local fire safety regulations and your fire alarm system's maintenance schedule. This should be performed by qualified personnel.
• Remplacement des composants : If the frangible element is broken or the device is damaged, it must be replaced by a qualified technician.

7. Dépannage

If you encounter issues with your Legrand 138074 Manual Call Point, refer to the table below. For problems not listed, contact qualified service personnel.

8. Spécifications

9. Informations sur la garantie

Legrand products are manufactured to high standards and are typically covered by a limited warranty against defects in materials and workmanship. The specific warranty period and terms may vary by region and product type. Please retain your proof of purchase. For detailed warranty information, refer to the official Legrand website or contact Legrand customer support in your region.

10. Assistance et contact

For technical assistance, product inquiries, or to report issues, please contact Legrand customer support. You can find contact information, including phone numbers and online support portals, on the official Legrand website:

www.legrand.com

Lorsque vous contactez le support, veuillez avoir à portée de main le numéro de modèle de votre produit (138074) et tous les détails d'achat pertinents.