1. Introduction
This manual provides comprehensive instructions for the safe and correct installation, operation, and maintenance of your RICOO S5244 Full Motion TV Wall Mount. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The RICOO S5244 is designed to securely mount flat-panel televisions ranging from 32 to 55 inches, with a maximum weight capacity of 50 kg. It supports various VESA mounting patterns and offers full motion capabilities including swivel, tilt, and rotation for optimal viewangles d'inclinaison.
Image 1.1: The RICOO S5244 Full Motion TV Wall Mount, shown in its compact, folded position.
2. Consignes de sécurité
AVERTISSEMENT: Improper installation may result in serious personal injury and property damage. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer.
- Assurez-vous que la surface de montage puisse supporter en toute sécurité le poids combiné du support et du téléviseur.
- Use only the provided hardware. Do not use the wall anchors for drywall or plaster walls; they are intended for solid concrete walls only.
- Ne dépassez pas la capacité de charge maximale de 50 kg (110 lb).
- Always check the VESA pattern of your TV before installation to ensure compatibility.
- Tenir les enfants et les animaux domestiques éloignés pendant l’installation.
3. Contenu du colis
Verify that all components are present and undamaged before proceeding with installation. Refer to the parts list in your packaging for a complete inventory.
4. Configuration et installation
4.1 Vérification avant l'installation
Before mounting, confirm the following:
- Poids du téléviseur : Votre téléviseur ne doit pas dépasser 50 kg (110 lbs).
- Compatibilité VESA : Check the four mounting holes on the back of your TV. Measure the horizontal and vertical distance between them. The mount supports VESA patterns from 200x200 mm up to 400x400 mm.
Image 4.1: Illustration demonstrating how to measure VESA hole patterns on a television. The mount supports horizontal distances from 50mm to 400mm and vertical distances from 150mm to 400mm.
Image 4.2: Visual guide for compatible TV sizes (30-55 inches) and VESA patterns (100x100 to 400x400) for the S5244 mount.
4.2 Montage de la plaque murale
- Determine the desired height and position for your TV. Use a stud finder to locate wall studs if mounting on wood stud walls.
- Place the wall plate against the wall at the desired height and use a level to ensure it is perfectly horizontal. Mark the drilling holes.
- Drill pilot holes according to the marked positions. For concrete walls, use a masonry drill bit and the provided concrete anchors. For wood studs, drill pilot holes directly into the center of the studs.
- Secure the wall plate to the wall using the appropriate screws and washers. Ensure all screws are tightened firmly.
4.3 Fixation des supports TV au téléviseur
- Placez délicatement votre téléviseur face contre une surface douce et propre afin d'éviter d'endommager l'écran.
- Attach the two vertical TV brackets to the back of your television using the screws that fit your TV's VESA holes. Ensure the brackets are centered and securely fastened. Do not overtighten.
4.4 Mounting the Television to the Wall Plate
- Avec l'aide d'une autre personne, soulevez délicatement le téléviseur à l'aide des supports fixés.
- Fixez les supports du téléviseur à la plaque murale. Assurez-vous que le téléviseur est bien fixé sur la plaque murale.
- Enclenchez les mécanismes de verrouillage de sécurité des supports pour éviter tout délogement accidentel.
5. Utilisation du support mural pour téléviseur
The RICOO S5244 offers flexible viewing options through its full motion capabilities.
5.1 Réglage pivotant
The mount allows for swiveling the TV up to 120 degrees (60 degrees left and 60 degrees right), depending on the TV size and wall clearance. Gently push or pull the TV to the desired angle.
Image 5.1: A television mounted on the S5244, demonstrating its ability to swivel up to 120 degrees for flexible viewing.
5.2 Réglage de l'inclinaison
The TV can be tilted +12 degrees upwards and -3 degrees downwards. Loosen the tilt adjustment knobs on the TV brackets, adjust to the desired angle, and then re-tighten the knobs to secure the position.
Image 5.2: The S5244 mount allowing a television to tilt up to 15 degrees (shown as 15 degrees up and 15 degrees down, but product specs state +12/-3 degrees).
5.3 Réglage de la rotation
For fine-tuning the level of your TV after installation, the front plate allows for a rotation adjustment of +/-3 degrees. This helps correct any slight misalignment.
Image 5.3: Illustration of the +/-3 degree rotation adjustment feature for leveling the television.
5.4 Wall Distance
The mount allows the TV to be positioned at a minimum distance of 80 mm from the wall and extended up to 370 mm.
Image 5.4: Visual representation of the adjustable wall distance, from a minimum of 80mm to a maximum of 370mm.
6. Entretien
Un entretien régulier garantit la longévité et le fonctionnement sûr de votre support mural pour téléviseur.
- Nettoyage: Essuyez le support avec un chiffon doux et sec. Évitez les nettoyants abrasifs et les solvants.
- Contrôles périodiques : Vérifiez régulièrement le serrage et la fixation de toutes les vis et connexions. Resserrer si nécessaire.
- Mouvement: If the movement becomes stiff, apply a small amount of silicone-based lubricant to the articulating joints. Do not use oil-based lubricants.
7. Dépannage
If you encounter issues with your TV wall mount, refer to the following common solutions:
- Téléviseur non nivelé : Use the +/-3 degree rotation adjustment feature to level the TV. Ensure the wall plate was installed level initially.
- Difficulty Moving TV: Check if any cables are snagged or if the tilt/swivel mechanisms are overtightened. Loosen slightly if needed. Ensure the TV weight is within the specified limit.
- Le support semble lâche : Immediately remove the TV from the mount. Re-check all wall plate and TV bracket connections. Ensure the wall anchors are appropriate for your wall type and securely installed. If unsure, consult a professional.
8. Spécifications
| Fonctionnalité | Spécification |
|---|---|
| Marque | RICO |
| Numéro de modèle | S5244 |
| Matériel | Alliage d'acier |
| Couleur | Noir |
| Tailles de téléviseurs compatibles | 32-55 pouces (81-140 cm) |
| Capacité de charge maximale | 50 kg (110 lb) |
| Compatibilité VESA | 200x200, 300x200, 300x300, 400x200, 400x400 mm |
| Gamme de pivot | Up to 120 degrees (+/-60 degrees) |
| Plage d'inclinaison | +12 à -3 degrés |
| Ajustement de la rotation | +/- 3 degrés |
| Distance du mur | 80 mm (min) - 370 mm (max) |
| Type de montage | Support mural |
| Type de mouvement | Articulé, pivotant |
Image 8.1: Detailed technical drawing showing the dimensions and range of motion for the RICOO S5244 wall mount.
9. Garantie et assistance
Specific warranty information for the RICOO S5244 TV Wall Mount is not provided in this manual. For detailed warranty terms, product support, or to contact customer service, please visit the official RICOO website ou se référer à l'emballage du produit.
For further assistance, you may visit the RICOO brand store on Amazon: RICOO Brand Store
