Produit terminéview
This manual provides instructions for the Weiser Smart Key Deadbolt Double Cylinder K4, model GD9371X3BRK4SMTMS6LS2R2. This deadbolt features the SmartKey cylinder technology, designed for enhanced security and ease of rekeying.
The SmartKey cylinder eliminates traditional pins and springs, offering instant rekeying functionality. It is engineered to be bump-resistant and highly pick-resistant. A rekeying learning tool is included with each lock, enabling the user to rekey the lock in three simple steps. This double cylinder deadbolt requires a key for activation from both the interior and exterior sides. It is designed to fit all standard doors and features a full 1-inch throw deadbolt with a 6-way latch mechanism.
Configuration et installation
Proper installation is crucial for the optimal performance and security of your Weiser Smart Key Deadbolt. Ensure you have the necessary tools before beginning the installation process.
Outils requis :
- Tournevis cruciforme
- Mètre à ruban
- Crayon
Étapes d'installation :
- Préparez la porte : Verify that your door has the correct bore holes and backset. This deadbolt fits standard doors.
- Installez le loquet : Insert the latch into the edge of the door. Ensure the latch bolt faces the correct direction (beveled edge towards the door frame). Secure with screws.
- Installer le cylindre extérieur : Place the exterior cylinder through the bore hole, ensuring the tailpiece aligns with the latch mechanism.
- Installez l'assemblage intérieur : Position the interior assembly over the tailpiece and secure it to the exterior cylinder using the provided screws.
- Opération de test : Insert a key into both the exterior and interior cylinders and turn to ensure the deadbolt extends and retracts smoothly.
For detailed visual instructions, refer to the installation guide included in the product packaging.
Mode d'emploi
The Weiser Smart Key Deadbolt is operated using a key from both sides of the door.
Verrouiller le pêne dormant :
- Insert the key fully into the keyway on either the interior or exterior side of the deadbolt.
- Turn the key clockwise until the deadbolt bolt is fully extended into the door frame.
- Retirez la clé.
Déverrouillage du pêne dormant :
- Insert the key fully into the keyway on either the interior or exterior side of the deadbolt.
- Turn the key counter-clockwise until the deadbolt bolt is fully retracted from the door frame.
- Retirez la clé.
SmartKey Rekeying Functionality:
The SmartKey feature allows you to rekey your lock to a new key in seconds, providing convenience and enhanced security. This is particularly useful if you lose a key or wish to consolidate multiple locks to a single key.
- Insérer la touche actuelle : Insert your currently working key (the "old" key) fully into the deadbolt cylinder and turn it 90 degrees clockwise.
- Insert Rekeying Tool: While the old key is still turned, insert the SmartKey rekeying tool (included with the lock) into the small hole next to the keyway. Apply firm pressure until you feel a click.
- Remove Old Key: Remove the old key while keeping the rekeying tool inserted.
- Insérer une nouvelle clé : Insert your new key (the key you wish to use from now on) fully into the cylinder.
- Remove Rekeying Tool: Remove the rekeying tool.
- Tester la nouvelle clé : Turn the new key 90 degrees counter-clockwise to return the cylinder to its original position. Test the new key by locking and unlocking the deadbolt several times. Ensure the old key no longer operates the lock.
Note: The rekeying process permanently changes the lock's keying. Ensure you have the new key readily available before starting the process.
Entretien
Regular maintenance ensures the longevity and smooth operation of your Weiser deadbolt.
- Nettoyage: Clean the exterior of the deadbolt with a soft, damp Chiffon. Évitez les nettoyants abrasifs ou les solvants qui pourraient endommager la finition.
- Lubrification: Periodically apply a small amount of graphite lubricant or a silicone-based lubricant specifically designed for locks into the keyway. Do not use oil-based lubricants as they can attract dirt and debris.
- Serrage des vis : Check mounting screws periodically and tighten if necessary to ensure the deadbolt remains securely fastened to the door.
Dépannage
If you encounter issues with your Weiser Smart Key Deadbolt, refer to the following common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| La clé ne s'insère pas ou ne tourne pas correctement. | Debris in keyway, worn key, or lack of lubrication. | Clean keyway with compressed air. Try a new or spare key. Apply graphite or silicone lubricant to the keyway. |
| Le verrou de sécurité ne s'étend ni ne se rétracte complètement. | Misalignment of lock components, loose screws, or door/frame issues. | Check and tighten all mounting screws. Ensure the strike plate on the door frame is properly aligned with the deadbolt. Verify the door frame is not warped. |
| SmartKey rekeying fails. | Rekeying tool not fully inserted, old key not fully turned, or incorrect new key. | Ensure the old key is fully inserted and turned 90 degrees. Press the rekeying tool firmly until a click is felt. Use a new, uncut key for the rekeying process. |
If the problem persists after attempting these solutions, contact Weiser customer support for further assistance.
Caractéristiques
- Marque: Weiser
- Nom du modèle : GD9371X3BRK4SMTMS6LS2R2
- Type de serrure : Key Lock (Double Cylinder Deadbolt)
- Dossier spécial : SmartKey Rekeying, Activating Lock (Keyed Entry on both sides)
- Matériel: Laiton
- Couleur: Or
- Type de finition: Brillant
- Dimensions de l'article (L xlxh): 4.5 x 8.9 x 3 pouces
- Poids de l'article : 1.16 livres
- Code à barres : 059184334807
- Loquet: 6-way latch
- Lancer de pêne dormant : Full 1 inch
- Compatibilité: Fits all standard doors
Garantie et assistance
Weiser products are manufactured to the highest standards of quality and technology. For specific warranty information regarding your GD9371X3BRK4SMTMS6LS2R2 Smart Key Deadbolt, please refer to the warranty card included with your product packaging or visit the official Weiser website.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Weiser Customer Service:
- Website: www.weiserlock.com
- Téléphone: Référez-vous à l'officiel website pour les numéros de contact régionaux.
When contacting support, please have your product model number (GD9371X3BRK4SMTMS6LS2R2) and purchase date available.
