Catit LED Flower Fountain User Manual

Introduction

Thank you for choosing the Catit LED Flower Fountain. This fountain is designed to provide your cat with a continuous supply of fresh, filtered water, encouraging healthy hydration habits. Its unique design and triple action filtration system ensure clean and great-tasting water for your feline companion.

Image: The Catit LED Flower Fountain, showcasing its white base and green top with a white and yellow flower spout.

Consignes de sécurité

• Débranchez toujours la fontaine avant de la nettoyer ou d'effectuer son entretien.
• Ensure the power cord is not damaged and is placed where it cannot be tripped over or chewed by pets.
• Do not operate the fountain if the pump is making excessive noise, as this may indicate a low water level. Refill immediately.
• Ce produit est conçu pour une utilisation en intérieur uniquement.
• Tenir hors de portée des enfants.
• The fountain is made of BPA-free materials, ensuring safety for your pet.

Image: Close-up of the Catit Flower Fountain showing the handy water level indicator and highlighting its BPA-free material construction.

Composants

The Catit LED Flower Fountain typically includes the following components:

• Water Reservoir (Base)
• Pump with Power Cord
• Bac à filtre
• Triple Action Filter
• Flower Top / Spout
• Flower Stem (for different flow settings)

Installation

1. Filtre de rinçage : Before first use, thoroughly rinse the Triple Action Filter under cold tap water for 10 minutes. This helps remove any loose carbon dust.
2. Assembler la pompe : Place the pump securely in the designated area within the water reservoir. Ensure the power cord is routed through the provided channel.
3. Installer le filtre : Insert the rinsed Triple Action Filter into the filter tray.
4. Placer le plateau filtre : Position the filter tray with the filter onto the pump assembly inside the reservoir.
5. Remplir d'eau : Fill the reservoir with fresh water up to the maximum fill line. The fountain has a 3-liter capacity.
6. Attach Flower Top: Place the flower top onto the filter tray, ensuring it is seated correctly.
7. Brancher: Connect the power cord to a suitable electrical outlet. The fountain will begin operating.

Image: An internal diagram illustrating the water flow path within the Catit Flower Fountain, highlighting its compact and ergonomic design.

Opérationnel

The Catit LED Flower Fountain offers multiple water flow settings to cater to your cat's preference:

• Gentle Flow: Use the fountain without the flower stem for a gentle, bubbling surface.
• Bubbling Top: Insert the flower stem without the yellow center for a calm, bubbling water surface.
• Flowing Streams: Insert the flower stem with the yellow center for multiple flowing water streams, mimicking a faucet.

Observe your cat to determine their preferred drinking method. Regular drinking is crucial for feline health, helping to prevent urinary tract diseases.

Image: Visual representation of the three distinct water flow settings available with the Catit Flower Fountain, designed for picky drinkers.

Image: A cat drinking directly from the flower spout of the Catit LED Flower Fountain.

Entretien

Regular cleaning and filter replacement are essential for maintaining the fountain's performance and your cat's health.

Nettoyage hebdomadaire :

1. Unplug the fountain and disassemble all components (flower top, filter tray, filter, pump, reservoir).
2. Wash all parts (except the pump) with warm water and a mild soap. Rinse thoroughly to remove any soap residue.
3. Clean the pump by disassembling it and rinsing all internal parts. Use a small brush to remove any debris or mineral buildup.
4. Remontez la fontaine conformément aux instructions d'installation.

Image: Hands demonstrating the ease of disassembling and cleaning the Catit Flower Fountain components under running water.

Remplacement du filtre :

The Triple Action Filter should be replaced approximately every 3-4 weeks, or more frequently if the fountain is used by multiple cats or if the water appears dirty.

• Unplug the fountain and remove the old filter.
• Rinse the new filter under cold tap water for 10 minutes before placing it in the filter tray.
• Jetez l'ancien filtre de manière responsable.

Image: An infographic detailing the three layers of the Catit Triple Action Filter: cotton mesh, active carbon, and ion exchange resin, for pure drinking water.

Image: Instructions showing how to rinse and submerge the Catit filter for 10 minutes before use, and how to verify it's an official product.

Dépannage

Caractéristiques

• Nom du modèle : Catit Flower Fountain
• Capacité: 3 litres
• Dimensions (L x l x H) : 8.3" x 7.7" x 9" (21 cm x 19.5 cm x 19.5 cm)
• Matériel: Polypropylène (PP), sans BPA
• Poids de l'article : 0.6 kilogrammes
• Couleur: Green Standard
• Type de filtre : Triple Action Filter (Cotton mesh, Active carbon, Ion exchange resin)

Image: Diagram illustrating the dimensions of the Catit Flower Fountain in both centimeters and inches.

Image: The Catit Flower Fountain highlighting its 3L drinking capacity and its ability to provide fresh water 24/7.

Garantie

The Catit LED Flower Fountain comes with a Garantie de 1 ans from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Catit website ou contacter le support client.

Soutien

For further assistance, troubleshooting, or to purchase replacement parts and filters, please visit the official Catit website or contact their customer service department. You can also find additional resources and FAQs on the Catit brand store page on Amazon.

Catit Store: Visit the Catit Store on Amazon