1. Produit terminéview
The Sharp Digital Auto Time Set Wall Clock, Model B012Y14XQ4, is designed for clear and easy readability. This clock automatically sets itself to the correct time and date using the Accu-Set feature. It displays the current time, month, date, day of the week, and indoor temperature on a split screen.
The clock operates on 2 AA batteries (not included) and measures approximately 8 x 7 inches. Its sleek black design allows it to blend seamlessly into various indoor environments, such as bedrooms or offices.
Figure 1 : Face avant view of the Sharp Digital Auto Time Set Wall Clock.
2. Installation
- Déballage: Retirez délicatement l'horloge de son emballage. Vérifiez qu'elle n'est pas endommagée.
- Installation de la batterie : Locate the battery compartment on the back of the clock. Insert 2 new AA batteries, ensuring correct polarity (+/-). Batteries are not included.
- Initial Time Setting (Accu-Set): The clock is equipped with Sharp Accu-Set technology, designed to automatically set the correct time and date upon battery installation. Allow a few minutes for the clock to synchronize. If the time does not set automatically, ensure the clock is placed in an area with good signal reception.
- Montage: This clock can be wall-mounted or placed on a flat surface. For wall mounting, use the integrated hanging slot on the back of the unit.
Figure 2 : Arrière view with dimensions and battery compartment location.
3. Mode d'emploi
Once set up, the Sharp Digital Auto Time Set Wall Clock continuously displays essential information:
- Temps: The current time is shown in large, clear digits. An 'PM' indicator is present for afternoon hours.
- Date: The month and date are displayed.
- Jour de la semaine : The current day of the week is indicated.
- Température intérieure : The ambient indoor temperature is shown in Fahrenheit.
The Accu-Set feature ensures the clock maintains accurate time, including adjustments for Daylight Saving Time (DST) where applicable. No manual adjustments are typically required for time changes.
Video 1: Demonstration of the Sharp Accu-Set Digital Wall Clock features, including time, date, and temperature display.
4. Entretien
- Remplacement de la batterie : When the display dims or the clock stops functioning, replace both AA batteries with new ones. Always replace both batteries at the same time.
- Nettoyage: To clean the clock, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or display.
- Stockage: Si vous rangez l'horloge pendant une période prolongée, retirez les piles pour éviter les fuites.
5. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Clock does not display time or is inaccurate. | Dead or incorrectly installed batteries. Accu-Set signal interference. | Replace batteries with new AA batteries, ensuring correct polarity. Move the clock to a different location, away from electronic devices that may cause interference, and allow time for re-synchronization. |
| Display is dim or difficult to read. | Low batteries. Insufficient ambient light. | Replace batteries. This clock does not feature a backlight; ensure it is placed in a well-lit area for optimal visibility. |
| L'heure est incorrecte après la configuration initiale. | Accu-Set feature did not synchronize correctly. | Remove batteries, wait 1 minute, then reinsert. Place the clock near a window or in an open area to improve signal reception for automatic time setting. |
6. Spécifications
- Marque: Pointu
- Modèle: B012Y14XQ4
- Type d'affichage : Numérique
- Couleur: Noir
- Dimensions du produit : 9 po L x 8 po H
- Source d'alimentation : Alimenté par piles (2 piles AA requises, non incluses)
- Dossier spécial : Temperature and Calendar Display, Accu-Set Automatic Time Setting
- Type de montage : Support mural
- Matériel: Plastique
- Utilisation intérieure/extérieure : Intérieur
- Poids de l'article : 1.04 livres
