Manuel d'utilisation de la télécommande filaire pour machine à neige 1byone 650 W

1. Produit terminéview

The 1byone 650W Snow Machine is designed to produce artificial snow effects for various occasions. It features a compact aluminum body, a wired remote control for easy operation, and a 10.1 fl. oz. (300ml) fluid tank. This machine is suitable for creating a festive atmosphere with its snow output of 2000 CFM (Cubic Feet per Minute) at a distance of 6.5-10 feet (2-3 meters).

Image: The 1byone 650W Snow Machine, a black unit with a handle and a wired remote control.

2. Consignes de sécurité

• This product is tested, approved, and certified by CE, RoHS, and ETL for safety.
• Veillez toujours à placer la machine sur une surface stable et plane.
• Use only non-toxic snow fluid specifically designed for snow machines. Fluid is not included.
• Ne plongez pas la machine dans l'eau ou tout autre liquide.
• Keep the machine away from heat sources and open flames.
• Assurez une ventilation adéquate autour de la machine pendant son fonctionnement.
• Tenir hors de portée des enfants et des animaux domestiques.
• Débranchez l'alimentation avant le nettoyage ou l'entretien.

3. Contenu du colis

Lors du déballage, veuillez vérifier que tous les éléments énumérés ci-dessous sont présents :

• 1x 1byone 650W Snow Machine
• 1x câble d'alimentation
• 1x télécommande filaire
• 1x Manuel d'utilisation

4. Instructions de configuration

1. Add Snow Fluid: Unscrew the cap of the fluid tank located on top of the machine. Carefully pour non-toxic snow fluid (not included) into the 10.1 fl. oz. (300ml) tank. Do not overfill. The machine includes a visual fluid meter to monitor levels. Securely replace the cap.
   

   Image: A hand pouring snow fluid into the machine's liquid tank.
2. Connecter l'alimentation : Insert the power cable into the power socket on the back of the machine, then plug the other end into a standard electrical outlet.
   

   Image: A hand connecting the power cord to the machine's power input.

3. Connecter la télécommande filaire : Plug the wired remote control into the designated port on the machine.
   

   Image: A hand connecting the wired remote control to the machine.

4. Échauffement initial : Turn on the machine using the power switch. The machine will require a short warm-up period before it can produce snow. The red LED indicator on the remote will illuminate when the machine is ready.

5. Fonctionnement

1. Activate Snow Production: Once the machine is ready (red LED on remote is lit), press the button on the wired remote control to start producing snow.
   

   Image: A hand pressing the button on the wired remote control to activate the snow machine.

2. Snow Output: The machine will output snow flakes at a rate of 2000 CFM, reaching a distance of 6.5-10 feet (2-3 meters).
3. Automatic Run-time: The machine is equipped with a 15-minute automatic run-time feature. After 15 minutes of continuous operation, the machine will automatically turn off. To resume operation, simply press the button on the remote again.
4. Niveau de bruit : The 650W power motor may produce a noticeable sound in quiet environments. This is normal operation.

6. Entretien

• Nettoyage: After each use, it is recommended to run the machine with distilled water for a few minutes to flush out any remaining snow fluid and prevent clogs.
• Stockage: Store the machine in a cool, dry place when not in use. Ensure the fluid tank is empty or contains only distilled water if storing for extended periods.
• Ajutage: The nozzle is made of cloth/fabric and is not intended to be removed.

7. Dépannage

If you encounter any issues with your 1byone Snow Machine, please refer to the following general advice:

• No Snow Output:
  • Check if the power cable is securely connected and the machine is turned on.
  • Ensure the fluid tank contains enough snow fluid.
  • Verify that the wired remote control is properly connected and its LED indicator is lit, signaling readiness.
  • Allow sufficient warm-up time for the machine.
• Bruit inhabituel : A certain level of motor noise is normal. If the noise is excessive or unusual, ensure the machine is on a stable surface and there are no obstructions.

For further technical support or specific issues, please contact 1byone customer service.

8. Spécifications

Image: Diagram showing the dimensions and weight of the 1byone 650W Snow Machine.

9. Garantie et assistance

1byone provides full technical support to address any issues or questions you may have regarding your snow machine. Please refer to the contact information provided in your product packaging or visit the official 1byone website d'assistance.