Introduction
This manual provides instructions for the safe and effective use of your ExpertPower 7.2V 1500mAh NiCd replacement battery. Please read this manual thoroughly before using the battery to ensure optimal performance and safety.
These batteries are designed as direct replacements for various Makita 7.2V power tools.
Consignes de sécurité
WARNING: Improper use of batteries can result in fire, explosion, or other hazards.
- Ne court-circuitez pas les bornes de la batterie.
- N'exposez pas la batterie à l'eau ou à l'humidité.
- Do not store the battery in direct sunlight or high temperatures.
- Do not incinerate or dispose of the battery in fire.
- N'essayez pas de démonter ou de modifier la batterie.
- Gardez les piles hors de portée des enfants.
- Use only chargers specifically designed for NiCd batteries.
- If the battery leaks, avoid contact with skin and eyes. Rinse immediately with water and seek medical attention.
Caractéristiques du produit
- Brand New: Ensures fresh performance.
- Ni-Cd Chemistry: Nickel-Cadmium battery type.
- 7.2 Volts: Vol standardtage for compatible tools.
- Capacité de 1500 XNUMX mAh : Fournit ample pouvoir pour une utilisation prolongée.
- Built-in Circuit Protection: Prevents overheating, short circuits, and overcharging.
- Matériaux de haute qualité : Conçu pour durer et offrir une grande fiabilité.
Compatibilité
This ExpertPower battery is a replacement for Makita part numbers: 191679-9, 192532-2, 192695-4, 632002-4, 632003-2, 7000, 7002, 7033.
It is compatible with the following Makita power tool models:
- 3700D, 3700DW
- 4071D, 4073D
- 4307D, 4307DW
- 4770D
- 6002D, 6002DW, 6002DWK
- 6010D, 6010DL, 6010DW, 6010DWK
- 6012D, 6012DL, 6012DW, 6012DWK
- 6015DWE, 6015DWK
- 6016DW
- 6017DWBE, 6017DWE
- 6018D, 6018DWBE, 6018DWE
- 6019D, 6019DW, 6019DWBE, 6019DWE, 6019DWLE
- 6022DW
- 6071DW, 6071DWK
- 6072DL, 6072DW, 6072DWK
- 6073D, 6073DW
- 6075D, 6075DW
- 6172D, 6172DW
- 6710D, 6710DW
- 6912D, 6912DW
- 9035D, 9035DW
- 9200D
- 9500D, 9500DW
- DA3000D, DA3000DW
- DA301D, DA301DW
- DA302D, DA302DW, DA302DWB
- ML700 (Flashlight), ML701, ML702
- UH1070DW, UH3000D, UH3000DW, UH3070DW
- UM1000D, UM1200DW, UM1270DW
Configuration et installation
- Charge initiale: For optimal performance, fully charge the battery before its first use. Refer to the "Charging" section for details.
- Insertion de la batterie :
- Align the battery with the battery slot on your compatible Makita power tool.
- Slide the battery into the tool until it clicks securely into place. Ensure it is fully seated and does not wobble.
- Retrait de la batterie :
- Locate the battery release button(s) on your power tool.
- Maintenez le ou les boutons de déverrouillage enfoncés tout en faisant glisser la batterie hors de l'outil.
Image: Two ExpertPower 7.2V NiCd batteries. These batteries are designed for compatibility with various Makita power tools.
Chargement
Use only a charger specifically designed for 7.2V NiCd batteries. Using an incompatible charger can damage the battery or cause safety hazards.
- Connect your NiCd battery charger to a power outlet.
- Insert the ExpertPower battery into the charger, ensuring proper alignment.
- Observe the charger's indicator lights. A typical NiCd charger will show a red light during charging and a green light when fully charged. Refer to your charger's manual for specific indicator meanings.
- Allow the battery to charge completely. Overcharging NiCd batteries can reduce their lifespan, though built-in protection helps mitigate this.
- Une fois chargée, retirez la batterie du chargeur.
Note: NiCd batteries can develop a "memory effect" if repeatedly recharged after only being partially discharged. To minimize this, it is recommended to fully discharge NiCd batteries before recharging them periodically.
Opérationnel
Once the battery is fully charged and securely installed in your compatible Makita power tool, the tool is ready for operation according to its own user manual. Always follow the safety guidelines provided with your power tool.
- Ensure the battery is clean and free of debris before insertion.
- N’insérez pas la batterie de force dans l’outil ou le chargeur.
- Monitor battery performance during use. If the tool's power significantly decreases, it's time to recharge the battery.
Entretien
- Nettoyage: Keep battery terminals clean and free of dirt or corrosion. Use a dry cloth to wipe them if necessary.
- Stockage: Store batteries in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, it is advisable to store NiCd batteries in a discharged state.
- Cycle de vie : NiCd batteries have a finite number of charge/discharge cycles. Proper charging and storage can help maximize their lifespan.
- Évitez les décharges profondes : While NiCd batteries benefit from occasional full discharge to combat memory effect, consistently running them completely dead can stress the battery.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| La batterie ne charge pas |
|
|
| Temps d'exécution court |
|
|
| Battery gets hot during charging/use |
|
|
Caractéristiques
- Type de batterie : NiCd (Nickel-Cadmium)
- Voltage: 7.2 volts
- Capacité: 1500 mAh (Milliampere Hour)
- Numéro de modèle : I0IBTPMK7K15C
- Dimensions du produit : 1.94 x 1.11 x 5.3 pouces
- Poids de l'article : 1.4 pounds (Total weight for 2 batteries)
- Fabricant: ExpertPower
Élimination des piles
NiCd batteries contain cadmium, a toxic heavy metal. Do not dispose of these batteries in household waste. Always dispose of NiCd batteries responsibly at designated recycling centers or according to local regulations. Many retailers that sell rechargeable batteries also offer recycling programs.
Proper disposal helps protect the environment and prevents potential health hazards.
Garantie et assistance
For warranty information or technical support regarding your ExpertPower battery, please contact ExpertPower customer service directly. Refer to the packaging or the ExpertPower webConsultez le site pour obtenir les coordonnées actuelles.
ExpertPower products are tested to match and/or exceed specifications of OEM products and are made with high-quality materials.
