1. Introduction
Thank you for choosing the EDM 03006 Compact Daily Programmable Timer. This device is designed to automatically control the power supply to your electrical appliances, helping you save energy and manage your daily routines efficiently. Please read this manual carefully before use to ensure proper operation and safety.
Consignes de sécurité
- Do not exceed the maximum load capacity of 3500W (16A, 250V).
- This timer is intended for indoor use only.
- Ne plongez pas le minuteur dans l'eau et ne l'exposez pas à une humidité excessive.
- Assurez-vous que la minuterie est correctement branchée dans une prise murale mise à la terre.
- Do not attempt to disassemble or repair the timer yourself. Contact qualified personnel for service.
2. Produit terminéview
The EDM 03006 timer features a mechanical dial for setting daily programs. Familiarize yourself with its components:
This image displays the EDM 03006 daily programmable timer. Key features visible include the central European Type F socket, a rotating dial with hour markings (AM/PM, NOON), and blue segments for setting program times. A red triangle indicates the current time, and a red LED light signifies power status.
- Prise centrale : European Type F socket for connecting your appliance.
- Cadran rotatif : Marked with 24 hours (1-12 AM, NOON, 1-12 PM).
- Blue Segments: Each segment represents a 15-minute interval. These are pushed in or pulled out to set ON/OFF times.
- Red Triangle Indicator: Shows the current time on the dial.
- Lumière LED rouge: Illuminates when the timer is receiving power and the connected appliance is in an 'ON' state according to the program.
3. Installation
- Déballer: Retirez délicatement le minuteur de son emballage.
- Etat initial: Ensure all blue segments around the dial are in the 'OUT' position. This means the timer is initially set to OFF for all intervals.
- Définir l'heure actuelle : Rotate the entire dial clockwise until the red triangle indicator points to the current time. For example, if it is 3:00 PM, align the red triangle with '3 PM'.
- Brancher: Insert the timer into a standard 250V AC wall socket. The red LED light should illuminate if the timer is currently in an 'ON' period or if the internal clock is running.
4. Mode d'emploi
Réglage des heures de programme
The timer allows you to set multiple ON/OFF periods throughout a 24-hour cycle using the blue segments.
- Each blue segment represents a 15-minute interval.
- To set an 'ON' period, push the corresponding blue segments inwards towards the center of the dial.
- To set an 'OFF' period, leave the corresponding blue segments in the en dehors position.
- Par exempleample, to have an appliance turn ON from 6:00 PM to 7:00 PM, push in the four blue segments that correspond to 6:00 PM, 6:15 PM, 6:30 PM, and 6:45 PM.
- Once programmed, the timer will automatically switch the connected appliance ON and OFF according to your settings as the dial rotates with the current time.
Branchement d'un appareil
Plug the appliance you wish to control into the central socket of the timer. Ensure the appliance's power switch is set to the 'ON' position if it has one, so the timer can control its power supply.
5. Entretien
- Débranchez toujours la minuterie de la prise murale avant de la nettoyer.
- Wipe the exterior of the timer with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or immerse the timer in water.
- Keep the timer free from dust and debris to ensure proper ventilation and operation.
6. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| L'appareil ne s'allume/s'éteint pas comme prévu. | Incorrect program settings (blue segments). L'heure actuelle n'est pas correctement réglée. Appliance switch is OFF. | Ensure blue segments are pushed IN for ON times and OUT for OFF times. Verify the red triangle indicator is aligned with the current time. Check that the appliance's power switch is in the 'ON' position. |
| Timer is not receiving power (Red LED is off). | Wall socket is not active. Timer is in an 'OFF' period. | Test the wall socket with another appliance. Check the blue segments around the current time; if they are all 'OUT', the timer is in an OFF state. |
| Timer makes a slight humming noise. | Normal operation of mechanical timers. | This is typically normal for mechanical timers and indicates the internal clock mechanism is functioning. |
7. Spécifications
- Marque: EDM
- Modèle: 03006
- Puissance nominale : 3500W (Max), 16A, 250V AC
- Dimensions (colis) : 17.3 x 9.4 x 7.9 cm
- Poids de l'article : 180 g
- Source d'alimentation : Courant alternatif (CA)
- Intervalles programmables : 15 minutes
- Daily Cycles: 24 heures
- Type de prise : European Type F
8. Garantie et assistance
Pour toute information relative à la garantie ou pour obtenir une assistance technique, veuillez consulter la documentation fournie avec votre achat ou contacter votre revendeur. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.
